Login for Access to Member Pricing

Ford Racing

Ford Racing 15-17 F-150 20in x 8.5in Six Spoke Wheel - Matte Black

MPN: M-1007-P2085MB Catalog #: 001197402 Category: Wheels - Cast Check Vehicle Fitment

Product Details

FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standard: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom testing. These standards define a series of tests that ensure the safety and finish of a wheel. THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS. Impact Testing: This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight. Dynamic Cornering Fatigue Testing: This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight. Dynamic Radial Fatigue Testing: This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight. Chrome Quality Testing: Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standars: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom testing. These standards define a series of tests that ensure the safety and finish of a wheel. THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS. Impact Testing: This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight. Dynamic Cornering Fatigue Testing: This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1, 000, 000 cycles before approved. The load applied is determined by a formula, using the vehicle weight. Dynamic Radial Fatigue Testing: This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5, 000, 000 cycles. The load applied is determined by a formula, using the vehicle weight. Chrome Quality Testing: Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

Ford Racing 15-17 F-150 20in x 8.5in Six Spoke Wheel-Matte Black

2015-19 F-150 20X8.5 SIX SPOKE WHEEL-MATTE BLACK

2015-18 F-150 20X8.5

Vehicle Fitment

Please verify year, make, model, and any notes before ordering.

Product Specs

Brand
Ford Racing
Part Number
M-1007-P2085MB
Catalog Number
001197402
Product Line
FR Wheels
Category
Wheels
Type
Wheels - Cast
UPC / Barcode
756122002964
Vendor Product Category
Wheels
Vendor Product Subcategory
Wheels - Cast
Box Length
22.50 in
Box Width
22.25 in
Box Height
13.51 in
Ship Weight
43.02 lb
Units Per SKU
1
Freight / LTL
No
Ship Alone
No
Air Restricted
No
CARB Approved
Yes
Clearance Item
No

Shipping & Availability

Current status 2 Available - Ready to ship
Estimated timing Usually ships within 24hrs

This item is showing available distributor inventory. Most in-stock performance parts ship quickly, but timing can vary by warehouse, vendor cut-off time, holidays, and carrier pickup.

Inventory shown: 2 available as of 7/22/2026.

Reviews & Questions

Real product feedback when available, plus quick ways to get fitment or product help.

Ask a Question
Need fitment help? Send us your year, make, model, engine, and the part number.
Already bought it? Reviews help other LMPerformance customers choose the right part.
Product question? We can help with specs, shipping, availability, and install details.

Other Popular Parts

$312.56
^