Roush
ROUSH F-150 5.0L Cold Air Intake Kit
* Images may be a representation and may not reflect the actual product.
Often Purchased with this Cold Air Intake
Product Details
Roush 2015-2017 F-150 5.0L V8 Cold Air Intake Kit
Your 2015-2017 Ford F-150 5.0L V8 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock air box. Providing up to 31% less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance by over 13.9 RWHP and 19.7 lb-ft RWTQ with no PCM re-calibration required!The kit features increased inlet and air box sizing to allow for maximum airflow, and provides an additional induction noise and aggressive performance sound.Our high-flow, high-capacity dry filter is proven to retain its shape. The filter requires no oiling and is easily washable for re-use. Included in the kit is the air filter with clamp, oversized injection-molded air box tray, a clean air tube, 105mm mass air flow tube, and all required mounting hardware and instructions.
ROUSH Performance's newly-designed cold air intake for the 2015-2017 5.0L V8 F-150 engine brings great performance increases that can be achieved with an installation that takes under an hour with no calibration required!
Your 2015-2017 Ford F-150 5.0L V8 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock air box. Providing up to 31% less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance by over 13.9 RWHP and 19.7 lb-ft RWTQ with no PCM re-calibration required!
Latent potential in power and fuel efficiency (that would otherwise be restricted), as well as reduced pressure drop, are two important benefits of this system. Custom tuning is not a requirement, as this CAI system was engineered and tested specifically for this application.
The kit features increased inlet and air box sizing to allow for maximum airflow, and provides an additional induction noise and aggressive performance sound. It was designed using OEM CAD data to guarantee optimized fitment, keeping heat out and encouraging maximum performance.
Our high-flow, high-capacity dry filter is proven to retain its shape. It is composed of an inner and outer layer of wire mesh for durability and reliable support of filtration media. The filter requires no oiling and is easily washable for re-use. Included in the kit is the air filter with clamp, oversized injection-molded air box tray, a clean air tube, 105mm mass air flow tube, and all required mounting hardware and instructions. The kit utilizes EPDM rubber couplers for proper fitment under engine load, rocking, and twisting, and will not void your factory warranty. Factory mounting locations and hardware are utilized to allow for quick and easy installation. This cold air kit is also backed by the ROUSH 90 Day Limited Parts Warranty.
- Fits 2015-2017 F-150 5.0L V8
- ROUSH Cold Air Intake System
- Increased engine performance of over 13.9 RWHP and 19.7 ft-lbs RWTQ with no PCM re-calibration required!
- The most highly-engineered cold air intake kit on the market
- Up to 31% less intake restriction compared to stock induction system in forced induction applications
- Increased inlet and air box sizing to allow for maximum airflow
- Provides additional induction noise and aggressive performance sound
- CAD-designed for optimized hood sealing to keep out heat and gain maximum performance
- High-flow, high-capacity, washable, and reusable performance air filter (Does not require oiling)
- Excellent filtration properties
- Does not void factory warranty
- Utilizes EPDM rubber couplers for proper fitment under engine load, rocking, and twisting
- Complete system from air inlet to throttle body
- Easy installation no cutting or modifying the stock intake
- Includes all necessary hardware and instructions
- Includes ROUSH 90 Day Limited Parts Warranty
- 50 State Legal for 2015-2017 Model Years: EO #D-418-30
- Part #421980
Vehicle Fitment
Please verify year, make, model, and any notes before ordering.
- 2015-2017Ford F-150
- 2015-2017Ford F-Series Truck
Product Specs
- Brand
- Roush
- Part Number
- 421980
- Catalog Number
- 001041978
- Product Line
- Cold Air Intakes
- Category
- Air Induction
- Type
- Cold Air Intakes
- UPC / Barcode
- 844764006041
- Vendor Product Category
- Air Intake Systems
- Vendor Product Subcategory
- Cold Air Intakes
- Vendor Part Terminology
- Engine Cold Air Intake Performance Kit
- Box Length
- 18.90 in
- Box Width
- 18.40 in
- Box Height
- 18.20 in
- Ship Weight
- 10.80 lb
- Units Per SKU
- 1
- Freight / LTL
- No
- Air Restricted
- No
- Hazmat
- No
- Chemical
- No
- Prop 65
- Y
- EPA Status
- Compliant
- CARB Approved
- Yes
- CARB EO Number
- D-418-30
- Clearance Item
- No
- Non-Returnable
- No
- Case Quantity
- 1
- Kit
- No
Shipping & Availability
This item is showing available distributor inventory. Most in-stock performance parts ship quickly, but timing can vary by warehouse, vendor cut-off time, holidays, and carrier pickup.
PROP 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Inventory shown: 73 available as of 7/22/2026.
Manufacturer warranty and return policy details will display here when available. Please refer to the manufacturers website for warranty information.
Reviews & Questions
Real product feedback when available, plus quick ways to get fitment or product help.
Other Popular Parts
If you are the proud owner of a Ford Vehicle, whether it be the iconic Ford Mustang, the Built Ford Tough F-150, Ford Super Duty or Ford Focus then chances are you are familiar with the name ROUSH PERFORMANCE, the company founded by motorsports legend Jack Roush.. Whether your knowledge stems from weekend racing or from your knowledge of industry accomplishments in the high performance aftermarket field that knowledge is sure to be positive. Expertise and dedication to the highest of standards.are trademarks of ROUSH thus affording them an inimitable reputation for providing exceptional performance products for your Ford vehicle.
This Michigan company has been in the business of transforming factory-born Ford Mustangs since 1995 on a limited-run basis and has made several numbered, limited-edition models. The ROUSH reputation relative to high performance Mustang powertrain parts is inimitable and you can feel confident that if you are in a quest for aftermarket Mustang parts like superchargers, cold air intakes and exhaust kits you will have a winner with ROUSH. Most importantly they are a company you can trust because the team at ROUSH understands your car’s unique system and consequently can provide you with ROUSH Performance parts that are of primo standards and are known for their ability to outlast many others.
Review our return, cancellation, shipping, warranty, and product image policies before ordering.
Contact us with questions before ordering
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
Free Shipping: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
Images: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Price Errors: In the event that a product has mistakenly been listed at an incorrect price, We reserve the right to refuse or cancel any orders placed for product listed at the incorrect price. We reserve the right to refuse or cancel any such orders whether or not the order has been confirmed and your account charged. If your payment type has already been charged for the purchase and your order is cancelled, a full refund to your orignial payment method in the amount of the incorrect price will be issued.
Special Order ITEMS: Some items are Special Ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special Ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, Special Order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns: We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special Orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order Claims All lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation: We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.