Tanabe TTB190F | Sustec Front Tower Bar Mazda Miata; 2016-2016

  • Mazda Miata / MX-5 Tanabe Shock Tower Brace
  • SELECT CATEGORY
  • SELECT BRAND
  • Mazda Miata / MX-5 Tanabe Shock Tower Brace
  • Tanabe TTB190F | Sustec Front Tower Bar Mazda Miata; 2016-2016

    • IN STOCK: SHIPS WITHIN 24HRS
    • Catalog #: 00861003
    • Model #: TTB190F
    • Model Trim: Miata
    • $132.05

    • QUANTITY:
    • + Add to Wish List

Product Description

Tanabe TTB190F - Tanabe Sustec Front Tower Bar Mazda Miata; 2016-2016.

The Tanabe SUSTEC TOWER BAR helps reduce chassis flex, allowing the dampers, springs, and stabilizers to show their true ability. When the power output of a vehicle is upgraded, and the handling potential of the vehicle is increased with upgraded springs, dampeners and/or adjustable coilovers, additional stress are placed on the vehicle. Because the vehicle was not built to see such loads on the car, the chassis will have a tendency to slightly flex more than normal, which can cause slight instabilities and deficiencies in handling. To improve chassis rigidity, front and rear tower bars are available to reduce flexing of the shocks towers.

Policies

(Images May Not be Vehicle Specific. For Display Purposes Only.)

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra.

IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.

Search Terms

Search Terms: TTB190F TAN-TTB190F TANTTB190F Tanabe Sustec Front Tower Bar Mazda Miata Miata / MX-5 Miata Suspension Shock Tower Braces Front Tanabe Sustec Front Tower Bar Mazda Miata 2016

Tanabe Warranty Policy

We warrant all of our parts against defects in materials or workmanship under normal use and service after proper installation, (subject to the conditions and exclusions described below) for a period of one (1) year from the original consumer's date of purchase. During the warranty period, we will, at our option, repair or replace the defective part or refund your money. This warranty does not cover labor reimbursement. This warranty is non-transferrable. Replacement parts are warranted from the date of exchange for a period of one (1) year. The following is a non-exclusive list of examples that are not considered defects: failure due to accident or collision, chemical fallout, salt, hail, or other environmental conditions including natural disasters; improper installation, self-installation, or modification of the part; vehicles under manufacturer's recall for a related problem; and misuse or abuse, including off-roading or racing. Due to the racing nature, and extremely high amounts of stress that are placed upon the suspension and drivetrain, Tanabe will honor this warranty on the DRIFT line of products only prior to installation.

THIS WARRANTY DOES NOT COVER INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS PHYSICAL INJURIES OR PROPERTY DAMAGE, LOSS OF TIME, LOSS OF USE OF THE VEHICLE, INCONVENIENCE, RENTAL VEHICLE CHARGES, TOWING CHARGES OR ACCOM-MODATIONS RESULTING FROM A DEFECT IN OR FAILURE OF THE PART. THIS WARRANTY REPRESENTS THE EXCLUSIVE REMEDY FOR ANY PRODUCT DEFECT OR FAILURE AND TANABE USA, INC. MAKES NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY WARRANTY OF MERCHANTABILITY, CONDITION OF ANY KIND, OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimers of implied warranties, and in those states any implied warranty that may apply is limited to one year. If any provision of the warranty should be deemed invalid or unenforceable, the remaining terms and provisions of the warranty shall remain in full force and effect.

To file a claim:

You must obtain a Return Authorization from the original place of purchase prior to returning parts for inspection for defects. Returns must accompany the original consumer's sales receipt. The R.A. number must be written on the outside of the carton to be returned. Any carton without a proper R.A number will be refused. An R.A. does not guarantee repair, replacement or refund, only that Tanabe will inspect the parts for defects. Returns must be sent by pre-paid freight.

Notice:

Warranty is not applicable to the 4.9 LSU Bosch sensor for the Revel VLS Wideband Air/Fuel Ratio Gauge.

Tanabe TTB190F Shock Tower Brace Review(s)

About Tanabe

History and information about Tanabe and their products.

TANABE: Made in Japan, made in Tanabe. Considerable effort goes into the research and development of our race derived products. Tanabe takes great measures during R&D, pre-production, production, and post production to ensure that each individual product we produce is of the highest quality in the industry. Everything is produced in-house under strict quality control at the Tanabe factory in Shiga, Japan. Our factory and production methods are ISO9001 (International Standard Organization) and JISQ9001 certified since the beginning of the millennium taking the standards of automotive performance to new heights. By never compromising on quality, performance potential is unlimited. Their product lines include Sustec suspension systems, Tanabe coilovers, lowering springs, and Tanabe Medalion exhaust systems.

Tanabe Brand Review(s):

Reviews for Tanabe's Other products are show below.

Tanabe Medalion Touring Exhaust Axle-Back Infiniti Q50 2.0t RWD; 2016-2017
5 Stars For Infiniti Q50 2.0T, Date: 9/28/2017

By: Ps
Ownership: 1 day - 1 week
LMP stock the cheapest tanabe exhaust in the whole US. Fast shipping as well. Good job LMP. I would highly recommended them for good and happy buying experiences. If you are driving the 2 liter version, I don''t recommend this exhaust, the turbo lag is horrendous.

Current Mods:
Axle back tanabe medallion touring exhaust K&N drop in filter

Tanabe Infiniti G37 Sedan RWD Y-Pipe; 2008-2013
5 Stars Great Product and Fast Service & Best Price, Date: 8/15/2017

By: gamLV
Ownership: 1 week - 1 month
LMPerformance is now my goto site to search for high performance auto products because they have the best competitive online price offers and fast service.

Current Mods:
Very happy with Tanabe products, used on my 2009 Infiniti G37S Sedan. I have the Tanabe Medalion Axle Back Muffler and just added the Tanabe Y-Pipe. Also have Swift Lowering Springs, Cusco Strut Cross Brace, Tanabe Front Lateral Brace and GSpec Rear Axle Brace and K&N Typhoon CAI. Front hood is VIS Carbon Fiber Racing Vented Hood. Very happy with all modifications, no regrets.

^