Pypes Exhaust Pypes G8 Axleback System V8/V6 - SGG60VS

Warranty: All products manufactured by PPE are guaranteed to be free from defects in the materials and workmanship at the time of sale. Sound or tone is not a warrantable/returnable issue. The products are guaranteed to fit and perform on their intended applications, provided the vehicle has not been modified* or suffered structural damage. When a shipment is received damaged; the consumer must contact the carrier to start a damage claim. All warranty claims must have a return authorization and will be reviewed by our claims team. At this point, it is our option to repair or replace the component. PPE reserves the right to replace any product that has been discontinued from its product line with a new product of comparable value and functionality. Under no circumstances shall the warranty be transferable or assignable. Any and all costs to remove and/or replace a warranted product are not covered by this warranty, including the shipment to and from PPE for the replacement. Also loss of vehicle, rentals or towing is not covered. Other than the warranty described above, all PPE products are sold “AS IS” and no other warranty is implied. At any time, the terms of this warranty are severable.

***PPE catalytic converters carry a 3 year/50,000 mile limited warranty. This specific warranty covers applications which are in good working/running order. The warranty does not cover converter failure due to poor running/performing engine, excessive fuel, nitrous oxide, superchargers, oil, antifreeze, improper O2 sensor function, road damage or hanger breakage.

The coating on all black powder coat tips is covered under warranty for 1 year from time of purchase. The coating on the inner walls of the tip are not covered under warranty.

History and information about Pypes Exhaust and their products.

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.

IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.

TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.

Very disapointed

By: Rich
Ownership: 1 week - 1 month

Installation was a breeze. everything lined up well, hangers were a bit off a bit but was easy to bend to correct. This was why I rated it a 2 vs a 1. However, this is where the the joy ends for me. The Pypes Axle Back Exhaust for the Pontiac G8 GT has the absolute worst harmonic drone at steady speed (between 60-75 mph, which is speed limit speeds) is where it's the worst in 6th gear I’ve ever encountered. There is also an harmonic imbalanced drone whenever your accelerating and the car shifts from 2nd to 3rd, and again from 3rd to 4th. Once I am on the highway, I actually now have to manually shift down to 5th gear to avoid that god awful hum/drone that is CONSTANT. No amount of music volume can block this sound. It looks that I’ve tossed almost $300 bucks down the drain and will be putting the originals back on this weekend and will probably just spend the extra money and buy Mangaflows. Now, I’m not saying this happens to everyone that purchases these, but if you love your money I would not take the chance and invest in these exhausts.

Current Mods:
K&N air filter and these exhausts.

good tone from the pypes setup and very easy to install (about 20 minutes). There is alot of drone noise, especially around 75 mph. Should be solved if DoD is turned off.

Current Mods:
afe stage 3 intake, pypes axle-back exhaust

Simple 30 minute mod that can be done with hand tools in the driveway. Fit was excellent- no tweaking required. Sound is terrific- nice rumble but, not loud or obnoxious. No drone or resonation while driving. Sound in cabin was barely noticeable under light throttle but, just right when you step on it. Highly recommend this product.

Current Mods:
Axle back exhaust

Sound is pretty amazing. I get constant thumbs up on the freeway. Looks good and gives the car that soft V8 rumble out of a V6. And bolts right up. The only advice I would give is to order new gaskets at the same time as the exhaust. Has a pretty heavy drone in 4th and 5th gears.

Current Mods:
None, just this axle back.

Love the exhaust. The installation was a piece of cake and the improved sound is great. You have to be prepared for a resonance between 40 and 50 MPH under load conditions, but at cruising conditions the sound is fine. I finally feel like I'm in a muscle car with the new exhaust. I find myself turning off the radio just to enjoy the sound of my 6.0L V8. The exhaust can't be beat for the price. Thanks Pypes and LMPerformance

Current Mods:
Pypes Axleback Exhaust, K&N Airfilter

This installation took 15 minutes and I'm no mechanic. The install was extremely easy and the sound after the install is great. Not too loud, not obnoxious. The car now has the sound it should have come with from the factory.

Current Mods:
Pypes Axle back exhaust, 20% tint.

These axlebacks went on without any problems what-so-ever. Very high quality. Great looking tips. Not to loud, but loud enough to know it's a v8. Didn't even need to drop the hangers. 2 bolts to remove and install the Pypes. Very pleased with my choice.

Current Mods:
no other current mods

Reviews for Pypes Exhaust's Other products are show below.

Pypes Mustang GT Long Tube Headers with X-pipe no-cats; 2011-2014
Excellent! Its hard NOT to drive! 2011 Mustang GT Premium

By: Toplait
Ownership: 1 day - 1 week
Amazing what sound and power difference these can make. I do have the minor primary tube header rattle at around 2k RPM. What I think would of fixed that from the facotory would be to weld small stainless steel strips to the Primary tubes closer to were they meet the flange. The header primarys are so close they vibrate against each other.

Current Mods:
Pypes long tube headers off road X-pipe.

Pypes Mustang Touring Axle-Back V6 and Ecoboost; 2015-2017
Great Sound and Look

By: Jared H
Ownership: 1 week - 1 month
Installed the Pypes Street Pro Touring Axle-Back exhaust system on my 2016 V6 Mustang. Installation took about 1 hour...pretty simple process. Had a slight problem with an offset figment on the right/passenger side. Got in contact with Pypes and they sent me a new one that fit perfect. There is little to no drone with this axle-back exhaust and the sound is great. https://youtu.be/MKHbdNXD73Q

Current Mods:
Pypes Street Pro Touring Axle-Back exhaust

Pypes Nova and Camaro 2.5" Crossflow System w/ X-pipe & RacePro Muffler; 1967-1974
Exhaust kit SGF70

By: Anonymous
Ownership: 1 day - 1 week
I put the sgf70 kit on my 1968 camaro and the kit fit perfectly and very simple. The best part of this exhaust is the sound. It is very pleasant at idle and cruise but very deep tone at full throttle. Just wanted to say great job!!!

Current Mods:
Just a mild street 350

Pypes Mustang V6 Mustang Pype-Bomb Axle Back Exhaust System - Phantom Black; 2011-2014
Just enough "voice" for my Mustang

By: rebelfag68
Ownership: 1 day - 1 week
The Pypes are awesome! The stock mufflers were very quiet... and for a Town Car or something, fine, but a sports car needs a voice. They are a bit loud under throttle, but at cruising, perfect!!! LOVE em!!

Current Mods:
running custom Bama Tunes, K&N stock replacement air filter, wanting a bigger throttle next

Pypes 409 Stainless Steel Violator Axle-Back w/ Polished 304 Tips for Mustang GT V8; 2005-2010
2010 GT 500 install

By: Danoe
Ownership: 1 day - 1 week
want to start out by saying. I've read alot of reviews and quite a few mention the fit on the right side not being right. Well it happened to me as well and I called Pypes. Come to find out I had the rear hangar on backwards. I took the Hangars off my FRPP mufflers and put them on exactly the same, wrong the rear one is flipped from the stock mufflers due to the differance at how the mount hangar is connected to the muffler. I changed it all around and wa-la it fits like a champ. The other key is loosening the muffler pipes at the mid point this will allow you center the tip. The sound is nice. I highly recommend these.

Current Mods:
FRPP resonator delete Shelby blue oiled air filter FRPP lowering coil springs BMR adj. panhard bar. FRPP tower strut brace. Rousch upper control arm Pypes violator mufflers

Pypes Stainless Steel Muffler Delete Axle-Back w/ Polished 304 Tips for Mustang GT V8; 2005-2010
Rockin Pony

By: gmb87
Ownership: 1 week - 1 month
Chose this pypes product after shopping around for similar products. price point was favorable. Sound is very impressive. On other sites the reviewers always complain about the right side fitment, and yeah it doesn''t fit properly. I even called pypes tech support and still settled for this system. The left side is perfect, but will need to cut and modify hangers to get the right side to match. (right side hangs low) Except for this the system is extremely nice, the sound is amazing, very little drone. The stainless tips look nice peeking out from under the bumper. Would buy this again, but hopefully the company will fix the right side, or compensate the owners for their time and $$ to have it done right. Overall a very nice product.

Current Mods:
no other mods except for this product.

Pypes Camaro V6 Cat-back Mid-Muffler System 2.5 INCH 4 TIP Coupe Only; 2010-2015
Two Thumbs Up

By: Heli
Ownership: 1 month - 1 year
Installed the catback in my garage by myself. just for bragging rights, but headed down the local muffler shop to have a thorough tightening. So far this product has not disappointed me. The sound is aggressive, and the tail view is perfect. Overall the transaction was very easy and delivery was quick!

Current Mods:
RS,RX catchcan, VMAX CNC ported throttle body, GM strut tower brace, Pypes catback exhaust

Pypes Camaro V6 Cat-back Mid-Muffler System 2.5 INCH 4 TIP Coupe Only; 2010-2015
Great experience!

By: Heli
Ownership: 1 week - 1 month
It was an excellent flawless transaction for my new Pypes catback. Free shipping, on time delivery and item arrived in impeccable condition. I installed the catback in my garage myself. A little difficult because I did it all by myself and I only use jack lifts and stands (all to satisfy my ego). Then brought it to the muffler shop for further tightening and better undercarriage inspection. Paid $20 as tip since the muffler shop refused payment for such a small job left for them to do. Only snag was I had to install a few washers to get things where it should be. And I am so happy I chose pypes ( T304 stainless)over more expensive cat backs. Not only does the pipes look good looking from under the car but the tips looks aggressively awesome as well. And the sound to me was exactly what I was looking for especially on WOT, as this one depends on your own preference. This is not a soft low growl on start-up by any means, so be warned. I am looking forward for my next purchase here for my CAI.

Current Mods:
CNC Vmax Ported throttle body, RX Catchcan, Pypes catback exhaust,

Pypes GM G SS 3" Crossmember-back System w/ X-pipe VIOLATOR; 1978-1988
78-88 gbody 3" Pypes Violator

By: 509BU
Ownership: 1 day - 1 week
Delivered extremely fast considering I ordered on a holiday weekendend. Installed the system in my driveway in about 3 hrs with basic tools and a sawzall to cut the pipes to length. Fits perfect and the Violator mufflers sound very aggressive especially when laying into the BBC.

Current Mods:
81 Malibu BBC, T400, Ford 9

Pypes Challenger V8 5.7L Cat-back System w/ Violator Mufflers - 409 Stainless; 2009-2013
BadACE

By: RTRMopar
Ownership: more than 1 year
If you want a unique sound and scare vettes, this is the system for you!

Current Mods:
Pypes catback, BBK 90mm TB, BBK LT headers, CAI (true, 90mm).

Pypes Mustang V6 409 SS True-Dual System; 2005-2010
Love the new sound!!!

By: Old Fool
Ownership: 0 - 1 day
I didn't want to try to do this myself on jack stands, so I was more than happy to pay my mechanic to do it and I'm glad I did!! He said the Pypes went on easy in about an hour, but then I needed to "tweek" it a bit. He said he spent another half hour to get it to line up right. He still wasn't happy and spent another couple of hours making adjustments to the Pypes because he said the fit still was off a little! (he only charged me for 1 1/2 hrs. of labor) I love the sound and look!!

Current Mods:
This is the first in a long line of modification I intend to do my V6 Mustang!!

Pypes Camaro V8 Pype-Bomb Axle Back Exhaust System; 2010-2015
This exhaust kit is AWESOME!

By: Albert
Ownership: 1 day - 1 week
Right out of the box, I was impressed with this product... The quality of the welds, bends & overall appearance are just as impressive as the tone and rumble it adds to my 2SS! Awesome product and very reasonably priced. Very satisfied customer.

Current Mods:
Pype-Bomb axle back exhaust system, badge decals & rim inserts.

Pypes Camaro V8 Pype-Bomb Axle Back Exhaust System; 2010-2015
2011 camaro ss convertable

By: Randy
Ownership: 1 day - 1 week
These fit very well. You can install at home but i would recomend a muffler shop to do the install. Took the shop about a hour. I did not like clamping them on so we welded them on, no chance of movement. If you are looking for a lot of bark you need to do a cat back system and eliminate all the resonators in the system. The car now has a very mild rumble. Definatly a improvment over the very quiet stock mufflers. Very happy with purchase.

Current Mods:
just exhaust

Pypes V6 409 SS Single-side Axle-back System; 2005-2010
Pypes Street Pro Axle back for V6 Mustang 2006

By: Billy
Ownership: 1 day - 1 week
I purchased the Pypes Street Pro single side Axle-back Muffler for my 2006 V6 Mustang with Pony Package. Purchase was easy, no hidden charges. Shipping was fast and on time. Removal of the old muffler took about 25 minutes. Install of Pypes unit took less than 15 minutes. Fit was just fine with no need for alterations, bending, cutting or welding. Big chrome tip looks great. I lifted the passenger side with a floor jack and jack-stand to give me some work room but no special skills or equipment is needed if you can turn a ratchet. I think it could be done easily without lifting at all if necessary. Unlike many V6 Mustang owners, I am perfectly happy with the performance and handling of the stock Pony Package V6 version. No races, no need to try and fool someone into thinking it will eat a V8. If I wanted V8 performance I'd have bought a GT. I drive to work and run errands and take short trips...normal stuff. No need to pretend it's a race car. BUT...the V6 just didn't sound like any mustang should with the stock exhaust. It sounds great now. If you want to avoid Cold-air-intakes and True-Dual Exhaust systems and all the work, cost, and tuning necessary to keep the computer happy... but, you would just like your Mustang to sound like a Mustang should...this is the best Mod. Sound is great. A nice rumble to life, quiet at idle, nice deep throaty sound when you get on it and back to quiet ride when cruising. No drone detected at highway speeds. It did add noticeable power as well. If you simply want your V6 to sound better and add a bit of power without getting heavy into mods...this is the way to go. Only mod I am planning and I am very pleased all around.

Current Mods:
No Mods

Pypes V6 409 SS Single-side Axle-back System; 2005-2010
Pypes single Street Pro

By: Anonymous
Ownership: 1 day - 1 week
I purchased the Pypes Street Pro single side Axle-back Muffler for my 2006 V6 Mustang with Pony Package. Purchase was easy, no hidden charges. Shipping was fast and on time. Removal of the old muffler took about 25 minutes. Install of Pypes unit took less than 15 minutes. Fit was just fine with no need for alterations, bending, cutting or welding. Big chrome tip looks great. I lifted the passenger side with a floor jack and jack-stand to give me some work room but no special skills or equipment is needed if you can turn a ratchet. I think it could be done easily without lifting at all if necessary. Unlike many V6 Mustang owners, I am perfectly happy with the performance and handling of the stock Pony Package V6 version. No races, no need to try and fool someone into thinking it will eat a V8. If I wanted V8 performance I''d have bought a GT. I drive to work and run errands and take short trips...normal stuff. No need to pretend it''s a race car. BUT...the V6 just didn''t sound like any mustang should with the stock exhaust. It sounds great now. If you want to avoid Cold-air-intakes and True-Dual Exhaust systems and all the work, cost, and tuning necessary to keep the computer happy... but, you would just like your Mustang to sound like a Mustang should...this is the best Mod. Sound is great. A nice rumble to life, quiet at idle, nice deep throaty sound when you get on it and back to quiet ride when cruising. No drone detected at highway speeds. It did add noticeable power as well. If you simply want your V6 to sound better and add a bit of power without getting heavy into mods...this is the way to go. Only mod I am planning and I am very pleased all around.

Current Mods:
none

Pypes Camaro V8 Pype-Bomb Axle Back Exhaust System; 2010-2015
v8 pype-bomb Axle back exhaust system

By: Terry
Ownership: 0 - 1 day
I took my car to a friends shop, and it took 3 hrs to install. We had to do a lot of triming and had to weld on. I love the sound. I wish the people who did it in 30 minutes or less would make a vedio of it.

Current Mods:
2011 camero ss

Pypes Mustang GT 3 inch SUPER SYSTEM Exhaust System; 2011-2014
Pypes 2011 Mustang GT 3 inch SUPER SYSTEM Exhaust System

By: gingy
Ownership: 1 day - 1 week
The name fits the exhaust. It sounds even better in person then on the internet. If you can change a tire you should have no issues with the install.

Current Mods:
First Mod

Pypes Camaro V8 Pype-Bomb Axle Back Exhaust System; 2010-2015
2011 Camaro Pype Bombs

By: Professor
Ownership: 1 day - 1 week
These Pype Bombs are the best. They installed in under 30 minutes. The instructions are good and clear and correct. The sound is awsome. Not too loud, just right. The sound under acceleration is great, when you get to speed and let of the acceleator to cruise, they quiet down and when you let off the gas, they have a nice rumble. I think my Camaro sounds like it should now. I highly recommend this system. You won't be disapointed.

Current Mods:
2011 LS-3, 6-Speed manual, SS/RS, K&N Typhoon CA/Filter

Pypes 409 Stainless Steel Violator Axle-Back w/ Polished 304 Tips for Mustang GT V8; 2005-2010
Awesome Product

By: Steve
Ownership: 1 day - 1 week
Just installed....it was quick and easy..Simple to install with basic tools....great sound over the stock pipes...no need for the hanger kit on the ''10 Mustang GT...comparable quality and sound to higher priced Axle-Backs...my neighbors will be VERY proud of my aggresive sounding stang!

Current Mods:
Pypes 409 Stainless Steel Violator Axle-Back