DEI
DEI Under Hood Liner Kit 22- Ford Maverick
* Images may be a representation and may not reflect the actual product.
Product Details
Heat and Sound Barrier - Under Hood - Hood Liner - Self Adhesive Backing - Ford Compact Truck 2022-25 - Each
The Maverick’s bare hood allows engine noise to echo into the cabin and underhood heat to radiate directly onto the painted surface - potentially leading to higher cabin temps and premature paint degradation. DEI’s new hood liner solves both issues with a precisely cut, dual-layer barrier designed to install easily and deliver immediate results. This application-specific liner is constructed using a high-performance composite of thermal insulation and acoustic damping material, bonded with a high-temp pressure-sensitive adhesive backing. It effectively absorbs engine noise before it enters the cabin and shields the hood from radiant heat - helping to preserve your paint finish over time. Unlike generic insulation kits that require cutting and guesswork, this liner is CNC-cut to perfectly match the Maverick’s hood geometry for a clean, professional fit. The peel-and-stick backing simplifies installation, allowing most users to complete the job in less than 30 minutes - no special tools, no drilling, and no fasteners required.
Engineered to tackle two major concerns at once, this custom cut, top-quality hood liner not only diminishes engine compartment noise but also effectively protects painted hoods from searing engine heat.
Vehicle Fitment
Please verify year, make, model, and any notes before ordering.
- 2022-2025Ford Maverick
Product Specs
- Brand
- DEI
- Part Number
- 50017
- Catalog Number
- 001864723
- Product Line
- Sound Deadeners
- Category
- Interior & Accessories
- Type
- Sound Deadeners
- UPC / Barcode
- 607078500175
- Vendor Product Category
- Fabrication
- Vendor Product Subcategory
- Insulation
- Length
- 26.00 in
- Width
- 6.00 in
- Height
- 6.00 in
- Weight
- 1.35 lb
- Units Per SKU
- 1
- Freight / LTL
- No
- Ship Alone
- No
- Air Restricted
- No
- Hazmat
- No
- Chemical
- No
- Prop 65
- Y
- CARB Approved
- Yes
- Clearance Item
- No
- Non-Returnable
- No
- Case Quantity
- 1
- Kit
- No
Shipping & Availability
This item is showing available inventory. Most in-stock performance parts ship quickly, but timing can vary by warehouse, vendor cut-off time, holidays, and carrier pickup.
PROP 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Inventory shown: 13 available as of 6/4/2026.
Manufacturer warranty and return policy details will display here when available. Please refer to the manufacturers website for warranty information.
Reviews & Questions
Real product feedback when available, plus quick ways to get fitment or product help.
Other Popular 2002 Parts
Design Engineering, Inc. (DEI) has been in the marketplace for twenty five years with the goal of providing their customers with outstanding quality heating and noise control products. It all started in1995 with the late Dale Markley in Cleveland, Ohio, who was set on developing answers to the problems facing racing and performance drivers underhood, power-robbing heat issues. The company’s success was evident when they had to double their working space in a short time and then in 2004 had to relocate to a new facility and a larger complex. But it is no surprise that the company has been growing ever since when you consider their impressive product line.
The DEI Form-A-Shield is a perfect example of the Design Engineering ingenuity because it can be used as a barrier to reflect and insulate a multiplicity of heat sources providing primo heat protection in areas where high heat is present and may be difficult to insulate. Because it is only 3/16th of an inch thick Form-A-Shield can be custom fitted to fit in even tight quarters. Having problems with your old hood insulation well look no further than Design Engineering, Inc. for a new Precut Underhood Insulation Kit that is sure to fit perfectly with its peel and stick design for ease of installation.
Design Engineering,Inc. didn’t stop with heating products but rather tackled those noise problems in your car as well with products like their Boom Mat Damping Material that will solve all those pesky noises from vibration, squeaks and rattles regardless of the source. Its 4 mil aluminum stiffening top skin and noise constraining layer will quiet even the most difficult situations and it is easy to install with an easy peel plastic release liner.
Review our return, cancellation, shipping, warranty, and product image policies before ordering.
Contact us with questions before ordering
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
Free Shipping: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
Images: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Price Errors: In the event that a product has mistakenly been listed at an incorrect price, We reserve the right to refuse or cancel any orders placed for product listed at the incorrect price. We reserve the right to refuse or cancel any such orders whether or not the order has been confirmed and your account charged. If your payment type has already been charged for the purchase and your order is cancelled, a full refund to your orignial payment method in the amount of the incorrect price will be issued.
Special Order ITEMS: Some items are Special Ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special Ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, Special Order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns: We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special Orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order Claims All lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation: We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.