Login for Access to Member Pricing

Unisteer Perf Products

UNISTEER PERF PRODUCTS Power Rack & Pinion - 1968-74 Nova

MPN: 8010540-01 Catalog #: 001593980 Category: Rack And Pinions Check Vehicle Fitment

Product Details

Rack and Pinion - Power - Aluminum - Black Powder Coat - GM F-Body 1967-69 - Kit

UNISTEER PERF PRODUCTS Power Rack & Pinion-67-69 Camaro, UNISTEER PERF PRODUCTS Power Rack & Pinion-1968-74 Nova

Rack and Pinion-Power-Aluminum-Black Powder Coat-GM F-Body 1967-69-Kit

UniSteer's kits are based off the stock cross-member and steering linkage. The power rack & pinion is a narrowed GM rack. This is machined so that the internal pivot points match the dimensions of the original center link and control arms on the Camaro front end. This gives you the steering you deserve.

The racks come mounted to a simple one piece bracket that mounts up right behind the stock cross member at the rear lower control arm bolts. Simply slide out the original bolts and replace with the supplied longer bolts to install the rack. The power rack & pinion comes with a new set of bolt-on steering arms which mount to the original spindles and ensure you maintain your turning radius.

These kits can be used with either the factory column or an aftermarket column, Choose whether you want a two or three u-joint shaft kit and what column you want to mount the shaft kit to-factory, 1 DD or 1-48 tooth spline. If using the factory column, you will also want to purchase our Factory Column adaptor which bolts into place on the factory column replacing the rag joint and giving you a spline to attach a u-joint.

The Power rack kits have been successfully used on cars with small block and big block motors. Headers can present an issue with clearance for the shaft linkage.

Note: Most aftermarket Heads have raised exhaust floors by 1/4 to 1/2 which does not make clearance any easier.

Tech Info:

Kit Includes:

UNISTEER PERF PRODUCTS Power Rack & Pinion-67-69 Camaro

UNISTEER PERF PRODUCTS Power Rack & Pinion-67-69 Camaro, UNISTEER PERF PRODUCTS Power Rack & Pinion-1968-74 Nova

UNISTEER PERF PRODUCTS Power Rack & Pinion-67-69 Camaro, UNISTEER PERF PRODUCTS Power Rack & Pinion-1968-74 Nova

UNISTEER PERF PRODUCTS Power Rack & Pinion-67-69 Camaro, UNISTEER PERF PRODUCTS Power Rack & Pinion-1968-74 Nova

Rack and Pinion-Power-Aluminum-Black Powder Coat-GM F-Body 1967-69-Kit

UniSteer's kits are based off the stock cross-member and steering linkage. The power rack & pinion is a narrowed GM rack. This is machined so that the internal pivot points match the dimensions of the original center link and control arms on the Camaro front end. This gives you the steering you deserve.

The racks come mounted to a simple one piece bracket that mounts up right behind the stock cross member at the rear lower control arm bolts. Simply slide out the original bolts and replace with the supplied longer bolts to install the rack. The power rack & pinion comes with a new set of bolt-on steering arms which mount to the original spindles and ensure you maintain your turning radius.

These kits can be used with either the factory column or an aftermarket column, Choose whether you want a two or three u-joint shaft kit and what column you want to mount the shaft kit to-factory, 1 DD or 1-48 tooth spline. If using the factory column, you will also want to purchase our Factory Column adaptor which bolts into place on the factory column replacing the rag joint and giving you a spline to attach a u-joint.

The Power rack kits have been successfully used on cars with small block and big block motors. Headers can present an issue with clearance for the shaft linkage.

Note: Most aftermarket Heads have raised exhaust floors by 1/4 to 1/2 which does not make clearance any easier.

Tech Info:

  • Pinion Type/Size: 17mm DD
  • Amount of Travel: 5
  • Turns Lock to Lock: 2.5 Turns
  • Pressure Port Size: Banjo-6 AN (lower)
  • Return Port Size: Banjo-6AN (upper)
  • Pump Required: Low Flow / Pressure
  • Inner End Threads: M14 x 1.5
  • Outer Ends: 10002

Kit Includes:

  • Rack and Pinion
  • Outer Tie Rod Ends
  • Mounting Bracket
  • Mounting Hardware

UNISTEER PERF PRODUCTS Power Rack & Pinion-67-69 Camaro, UNISTEER PERF PRODUCTS Power Rack & Pinion-1968-74 Nova

Vehicle Fitment

Please verify year, make, model, and any notes before ordering.

Product Specs

Brand
Unisteer Perf Products
Part Number
8010540-01
Catalog Number
001593980
Product Line
Rack And Pinions
Category
Steering & Components
Type
Rack And Pinions
UPC / Barcode
843613129115
Box Length
47.50 in
Box Width
10.00 in
Box Height
6.50 in
Ship Weight
32.00 lb
Ship Alone
Yes
Air Restricted
No

Shipping & Availability

Current status Back Order
Estimated timing Contact us for ETA

This item is not showing current inventory. You may contact us for an ETA before ordering.

Reviews & Questions

Real product feedback when available, plus quick ways to get fitment or product help.

Ask a Question
Need fitment help? Send us your year, make, model, engine, and the part number.
Already bought it? Reviews help other LMPerformance customers choose the right part.
Product question? We can help with specs, shipping, availability, and install details.

Other Popular Parts

$1,009.67
^