Borgeson
BORGESON Vibration Reducer 3/4inDD x 3/4in-36
* Images may be a representation and may not reflect the actual product.
Often Purchased with this Steering Shaft Joints/u-joint
Product Details
Borgeson 034934 Single Steering Universal Joint
Steering Universal Joint - Single Joint - 3/4 in 36 Spline to 3/4 in Double D - Vibration Dampener - Steel - Natural - Universal - Each
Steering Joint
Single Steering Universal Joint
Single Steering Universal Joint; Vibration Reducer Combination; Steel; Fits 3/4 in. Double D X 3/4 in. -36 Spline;
Noise, vibration, and harshness are at the top of the list of concerns to all automotive enthusiasts. With the more frequent use of rack and pinions and low profile performance tires, there are more road vibrations transmitted to the steering wheel than in the past. Using a Borgeson vibration reducer results in an immediate change in the steering feel and as an added benefit, this reduction in vibration has been shown to increase the overall life of the steering components. The Vibration reducer / Universal joint combination is available with a 9/16-26, 5/8-36, 3/4-30, 3/4-36, or 3/4DD vibration reducer end and any spline or DD size on the universal joint side of the assembly. Vibration reducers are available in Steel, Stainless Steel and Polished Stainless. Like our needle bearing universal joints our combination vibration reducer will accommodate up to a 35 angle.
The Borgeson Universal Company has been manufacturing steering universal joints and components for the industrial, automotive, military and aerospace markets since 1914. Purchased by the present owners in 1982, Borgeson continued to develop and refine our original needle bearing universal joint into the finest and strongest joint you can buy. Seeking to expand, Borgeson purchased Mullins steering gears in 2001 and combined the two businesses into one central, 50,000 square foot modern manufacturing facility. Borgeson has continued to develop and produce the most dependable steering components available.
- Single Steering Universal Joint
Noise, vibration, and harshness are at the top of the list of concerns to all automotive enthusiasts. With the more frequent use of rack and pinions and low profile performance tires, there are more road vibrations transmitted to the steering wheel than in the past. Using a Borgeson vibration reducer results in an immediate change in the steering feel and as an added benefit, this reduction in vibration has been shown to increase the overall life of the steering components. The Vibration reducer / Universal joint combination is available with a 9/16-26, 5/8-36, 3/4-30, 3/4-36, or 3/4DD vibration reducer end and any spline or DD size on the universal joint side of the assembly. Vibration reducers are available in Steel, Stainless Steel and Polished Stainless. Like our needle bearing universal joints our combination vibration reducer will accommodate up to a 35 angle.
The Borgeson Universal Company has been manufacturing steering universal joints and components for the industrial, automotive, military and aerospace markets since 1914. Purchased by the present owners in 1982, Borgeson continued to develop and refine our original needle bearing universal joint into the finest and strongest joint you can buy. Seeking to expand, Borgeson purchased Mullins steering gears in 2001 and combined the two businesses into one central, 50,000 square foot modern manufacturing facility. Borgeson has continued to develop and produce the most dependable steering components available.
- WARNING CA Proposition 65 Message: WARNING: This product can expose you to chemicals including Nickel and Chromium (hexavalent compounds) which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit: www.P65Warnings.ca.gov
