Synergy Mfg
Synergy 2013+ Ram 3500 Leveling System
* Images may be a representation and may not reflect the actual product.
Product Details
Synergy 2013+ Ram 3500 Leveling System
The Synergy Ram Truck Leveling System levels the stance of the truck and significantly improves ride quality and control with no loss in towing capacity. Proprietary Synergy Tuned Fox shocks have been paired with matched coil springs to create a system that significantly outperforms the competition. We guarantee you will love the way your truck rides. This system is designed to fit 35 inch tires. 37 inch tires will fit with minor inner fender trimming.
Benefits:
Technical Features:
Included Components:
Notes:
This basic leveling system can be further upgraded with additional components available from Synergy. A heavy duty adjustable track bar is available to re-center the front axle under the vehicle, Radius Arm Drop Brackets are available to correct the radius arm geometry and heavy duty replacement steering is available to replace the weak and problematic stock drag link and tie rod. We also recommend the use of MOPAR upper isolator 68268825AA. This is the factory Power Wagon unit and has thicker material to better hold up and eliminate spring bowing.
Benefits:
- Raises the front suspension to level the truck
- Increases ride comfort and control
- Increases small bump compliance and bottom out resistance
- Increases wheel travel
- No loss in towing capacity
- Will allow installation of 35 inch or 37 inch tires
- Affordable Quality, made in the USA
Technical Features:
- Proprietary Synergy Tuned Fox Shocks matched to the Ram's spring rates and weight provide incredible ride quality and control.
- Front wheel travel is increased 40 percent from 7 inches to 10 inches and rear wheel travel is increased from 8.5 inches to 10 inches on 2500 trucks and from 6.5 inches to 10 inches on 3500 trucks.
- Progressive wound linear coil springs are manufactured using the latest in CNC hot winding technology for optimized on and off road performance.
- Coil springs are softer than stock and raise the front of the truck 2.25 inches based on the weight of a 2500 Diesel Crew Cab configuration.
- Coil springs are cycled to set height and can compress to solid without overstressing.
- Coil springs feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance.
Included Components:
- 2) Front Coil Springs
- 2) Synergy Tuned Front Shocks
- 2) Synergy Tuned Rear Shocks
Notes:
Vehicle Fitment
Please verify year, make, model, and any notes before ordering.
- 2013-2022Dodge Ram Truck
Product Specs
- Brand
- Synergy Mfg
- Part Number
- 8750-11
- Catalog Number
- 001434716
- Product Line
- Leveling Systems
- Category
- Suspension
- Type
- Leveling Kits
- UPC / Barcode
- 887753146472
- Vendor Product Category
- Suspension
- Vendor Product Subcategory
- Leveling Kits
- Vendor Part Terminology
- Suspension Leveling Kit
- Length
- 26.10 in
- Width
- 15.60 in
- Height
- 7.90 in
- Weight
- 67.80 lb
- Units Per SKU
- 1
- Freight / LTL
- No
- Air Restricted
- No
- Prop 65
- Unknown
- CARB Approved
- Yes
- Clearance Item
- No
Shipping & Availability
This item is showing available inventory. Most in-stock performance parts ship quickly, but timing can vary by warehouse, vendor cut-off time, holidays, and carrier pickup.
PROP 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Inventory shown: 4 available as of 6/3/2026.
Manufacturer warranty and return policy details will display here when available. Please refer to the manufacturers website for warranty information.
Reviews & Questions
Real product feedback when available, plus quick ways to get fitment or product help.
Other Popular Parts
Now that you are an owner of an off-road vehicle you are probably looking for ways to improve your vehicle's performance particularly when it comes to your suspension system. Well, Synergy Manufacturing has been in the market of doing just that since 2005. And you can be assured that most of their components are made right here in the USA and that the suspension components are designed from scratch to give you world class performance.
Synergy thought of everything for your suspension system with features like progressive coil springs, adjustable track bars, shock relocations kits, adjustable upper and lower control arms and dual durometer bushings to name a few.
But Synergy Manufacturing didn’t stop with suspension systems but went on to design heavy duty steering components with features like a drag link that bolts directly into your factory mounts, tie rods that are over forty percent stronger than your stock rods and more. The axle upgrades, skid plates and other exceptional components can serve to provide your off-road vehicle with that much desired off-road performance and give it a great look as well.
The adjustable ball joint kit is designed with longevity in mind and is meant to last the life of your vehicle and to stop that sloppy steering, and it comes with a limited lifetime warranty. And you can be assured that rigorous testing is done on all components because they are tested on trails like the extreme Hammers and Rubicon trails that challenge even the toughest coil springs, shock mounts and control arms to the test.
Review our return, cancellation, shipping, warranty, and product image policies before ordering.
Contact us with questions before ordering
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
Free Shipping: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
Images: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Price Errors: In the event that a product has mistakenly been listed at an incorrect price, We reserve the right to refuse or cancel any orders placed for product listed at the incorrect price. We reserve the right to refuse or cancel any such orders whether or not the order has been confirmed and your account charged. If your payment type has already been charged for the purchase and your order is cancelled, a full refund to your orignial payment method in the amount of the incorrect price will be issued.
Special Order ITEMS: Some items are Special Ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special Ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, Special Order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns: We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special Orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order Claims All lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation: We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.