Order Now, Pay Later Learn More.
Borla Exhaust 11789 - Borla Mustang GT S-Type Axle-Back Sport V8; 2011-2012.
Order the Borla axle-back exhaust online.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
Search Terms: 11789 B11789 Borla Exhaust Borla Mustang GT S-Type Axle-Back (Sport) V8 SType AxleBack Ford Exhaust Systems Axle-Back: S-Type Borla Mustang GT S-Type Axle-Back (Sport) V8 2011 2012
These are parts that other customers have purchased while purchasing the product on this page.
History and information about Borla Exhaust and their products.
Borla Exhaust Systems are the pacesetter in the manufacture and design of high performance Borla exhaust systems, header and induction systems and as a consequence are sui generis in three ways: 1) manufactured from exotic materials, such as state- of- the art 304 stainless steel, titanium and carbon fiber; 2) the warranty outlasts the vehicle's life; and 3) the muffler design allows for a bolt-on and uncomplicated fit.
Every Borla Cat-Back System, Borla Header and Rear Section Exhaust is constructed of aircraft-quality authenticate stainless steel and is stainless inside and out and utilizes T-304 stainless steel because it is the most resistant to corrosion culminating in a long-lasting and resilient exhaust system. Bigger is not always better because big pipes can divest the exhaust of energy and additionally big pipes aggrandize the low frequencies culminating in uncomfortable roaring or droning sound. The Borla exhaust system & Borla Muffler are less restrictive and preserves the velocity and high frequency so the dominant sound is behind the tailpipe where it belongs and in addition to that Borla's sui generis Intercooled Tips have an idiosyncratic look and are seen ubiquitously on show and street cars providing your vehicle with the same idiosyncratic look as these winners.
If the above acclaimed reasons for buying a Borla Muffler or Borla Exhaust system are not sufficient then consider that the installation for the do-it-yourselfer should conceivably take about two hours for a system install and about six hours for header installation and this is just another accolade for these parts and a reason for you to purchase them.
Borla Exhaust Systems have a compilation of emission legal exhausts that are the largest in the industry and Borla's Million Mile warranty is the most compendious of any exhaust supplier. Borla exhaust mufflers will stand behind your performance exhaust product longer than you will be driving your car and that is a commitment you can depend on.
Longevity is not the only thing that recommends Borla exhaust mufflers as your choice when it comes to a performance exhaust system even though you cannot forget about the fact that they have been manufacturing premium exhaust systems for three decades and they have their roots in the manufacturing of parts for the iconic Rolls-Royce and Ferrari, names that speak for themselves. Their solid reputation in the aftermarket performance parts industry is second to none when it comes to exhaust products and they have achieved this reputation by providing only exemplary products for street, off-road and racing applications and their diligence of quality production is the same for all three. Borla mufflers and Borla exhaust systems are able to do this because they have invested in a facility that is outstanding in every way and includes an avant-garde test and development center focused on improvement in all areas and have been instrumental in improving the design of aftermarket performance exhausts. All of this effort is not without its rewards and they have been awarded “BEST NEW PRODUCT” in the industry on more than one occasion, something to be extremely proud of. The top engine builders in racing can’t all be wrong when they choose BORLA exhaust systems & Borla Mufflers and neither will you be when you choose BORLA Pipes. We also offer other great parts with these Corsa Performance Exhaust Systems.
Exactly What I Wanted, Date: 9/6/2011
By: Micky Blue
Ownership: 1 day - 1 week
I've owned Borla's in the past, so I knew the quality of the products already. Once I put them on, this car is a completely different animal. Gives the 5.0 the sound it deserves.
Also I was extremely impressed with how fast the shipping was from LMP. I did not expect to see my order for at least a solid 5-10 days and was pleasantly surprised to see had arrived in just 2 days after ordering. I will definitely order from here again in the future.
Current Mods:
Borla Exhaust, SCT Tuner
Reviews for Borla Exhaust's Other products are show below.
LMPerformance rapid shippment of my S-Type II exhaust., Date: 2/9/2017Current Mods:
No mods.
Borla ATAK Exhaust, Date: 4/21/2016Current Mods:
Cold Air intake and the Exhaust only
2012 Camaro 2SS, Date: 4/24/2015Current Mods:
R2C Cold Air Intake, Borla S-Type Axle Back Exhaust
Great Exhaust, Date: 3/4/2015Current Mods:
Injen Cai
Headlight Retrofit MD2S
Borla Axleback
got them in!!!, Date: 1/28/2015Current Mods:
Intake and now exhaust!!!
Nice Exhaust, Date: 7/22/2014Current Mods:
K&N Filter, Borla exhaust.
Borla ATAK Exhaust System, Date: 5/18/2014Current Mods:
2013 Dodge Charger SRT8
Borla ATAK Exhaust system
Perfect fit, sound and quality. Extremely fast delivery, Date: 4/25/2014Current Mods:
Cold air intake
Borla Exhaust for my 2014 Jeep Wrangler, Date: 4/15/2014Current Mods:
K&N Air filter, Borla Exhaust
Easy bolt-on performence!, Date: 11/19/2012Current Mods:
K & N air filter, 18" Toyota Racing Development wheels
Great Service, Date: 9/5/2012Current Mods:
Stock
Borla ATAK , Date: 6/6/2012Current Mods:
Borla ATAK System
BORLA ATAK 140356 , Date: 5/18/2012Current Mods:
None - Stock 2011 Camaro 2SS Synergy Green
2012 3.7 v6 Mustang Borla exhaust, Date: 4/23/2012Current Mods:
JLT cold air intake, Borla ATAK
axle back exhaust mufflers.
Coming soon will be a tune while sitting
on the dyno machine.
great sound, Date: 3/31/2012Current Mods:
I only have the new Borla Atak axel backs on everything else is stock
BORLA, Date: 2/15/2012Current Mods:
Headers
Glad I spent the extra bucks!, Date: 2/5/2012Current Mods:
2012 Boss 302, this is the first mod...not much else is needed:)
Amazin Product and Seller, Date: 1/9/2012Current Mods:
2000 Toyota Land Cruiser
Amazin Product and Seller, Date: 1/9/2012Current Mods:
2000 Toyota Land Cruiser
Excellent Exhaust, Date: 9/30/2011Current Mods:
Injen CAI, JET Flo Air Sensor, Borla Cat-Back 'S-Type' exhaust, SLP High Wing Spoiler, SLP side gill decals, SLP Black out panel, SLP center mount and SS emblem for both front grill and trunk and finally a DiabloSport performance tuner.
Great buy, Date: 9/11/2011Current Mods:
Upper pulley,cold air,chip, headers,borla exhaust
Borla exhaust system X pipe, Date: 8/24/2011Current Mods:
All Stock 2010 Camaro 2LT with borla x pipe exhaust
Wife loves it, Date: 7/23/2011Current Mods:
CAI Cold Air Induction
Borla Axle Back System
borla stype for 03 cobra, Date: 7/11/2011Current Mods:
bassani o/r x-pipe, borla s-type catback
Borla 14885, Date: 7/9/2011Current Mods:
Borla 14885 that is it for now
Very Pleased, Date: 6/16/2011Current Mods:
Borla Camaro 2010-11 V6 Exhaust System with X pipe
Borla for the win!, Date: 4/9/2011Current Mods:
CAI, UDP, 78 Throttle+Plenum, 31 spline 8.8 rearend w/ 4.10
Borla Stingers 2004 Cobra, Date: 1/1/2011Current Mods:
Borla Stingers
Great Cat-back: Fits WRX and STi, Date: 11/14/2010Current Mods:
Perrin shifter bushings, Borla XR-1 cat-back.
This site is great, Date: 10/21/2010Current Mods:
Bone stock except for this
AMAZING, Date: 9/27/2010Current Mods:
-Borla Dual Exhuast X pipe.
-R2C Cold air intake
great sound/great price, Date: 9/15/2010Current Mods:
borla exhaust
atak, Date: 8/26/2010Current Mods:
borla atak, K&N air filter, hurst short throw shifter, all lights except headlights blacked out, and 5% window tint
Scion TC Exhaust, Date: 8/11/2010Current Mods:
AEM cold air, Borla Exhaust, Brumbro Brakes
GAIN 1-2 MPG, Great exhaust!!, Date: 7/30/2010Current Mods:
Simota SRI CB-II, Corksport Inserts
Great Product, Date: 7/11/2010Current Mods:
No major mods. Just appearance, tinted window and painted the calipers red(wanted the extra 10hp :P)
Killer Choice, Date: 2/26/2010Current Mods:
K&N High Flow Air Filter
Killer Choice, Date: 2/26/2010Current Mods:
K&N High Flow Air Filter
This system will fit the 2003-2005 Thunderbird, Date: 2/11/2010I wanted to let you know that the Borla exhaust system I purchased from you arrived in good shape, and I have installed it.
When I ordered it, there was some question about whether this system, which Borla describes being for the 2003 Thunderbird, would fit the 2005 Thunderbird that I own. I had read on several Thunderbird forums that it would fit, but you may have to adjust (bend) a heat-shield on the car to keep it from interfering. That's exactly what I encountered. The heat-shield is made of such thin material however, that it was no trouble at all to adjust it for a good fit. A few carefully placed blows with a gloved hand were all it took.
The heat-shield in question is in the approximate middle of the car, where the two stock mufflers are. The new unified muffler on the Borla system simply needs a little more room under the car. The rest of the installation was a snap, and the whole job only took about four hours including jacking up the rear of the car to make room to work. The stock exhaust comes of in one piece.
I have no plans to put a Borla exhaust on my 2004 Bird, but it appears the system would go on exactly the same as the 2005.
I love the sound of this system. It's a very nice rumble at startup, and gets pleasantly louder on hard acceleration. There is little difference in the exhaust noise at highway speed however, which is a plus for me. I didn't want the car to become an annoying road-trip vehicle.
Thanks so much for your great pricing, and customer service.
Kevin North Little Rock, AR
Current Mods:
So far, this and window tinting are the only mod's I've done to the car. I've been a T-Bird fan for years, and currently own two. A 2004 Pacific Coast Roadster, and a 2005 Cashmere. Both were the Special Limited Editions for their respective years.
Borla Stinger Cat Back, Date: 2/1/2010Current Mods:
Bassani Catted X pipe, Borla Stinger Cat Back
Greatness, Date: 12/9/2009Current Mods:
18s" Kasino black/chrome rims, tint, Planet Audio TORQ 1601D 1600w amp, 15" Memphis M3, Pioneer deck.
Borla stinger for 1999 C5 Conv, Date: 9/30/2009Current Mods:
Zex nitrous sys, twin K & N large cone air filters. Bypassing the orig air box. ( removed ) New Michelin Pilot Sport P S 2 And this Borla stinger exhaust. Twin 4" round tips.
Great Tunes, Date: 8/4/2009Current Mods:
Amsoil synthetic lubricants, Jegs cold air intake with Amsoil 100% synthetic nanofiber media 6065 dry air filter with hydrophobic slip over pre filter and the Borla 140287 cat back exhaust.
borla stingers for 03-04 cobra, Date: 7/14/2009Current Mods:
intake, catted x pipe, catback.
Great exhaust!, Date: 5/31/2009Current Mods:
Sri Air intake
Awesome exaust, Date: 5/25/2009Current Mods:
high lift cam 1.6 roller rockers, no cat back, stock headers :( that will change soon.
excellent, Date: 5/22/2009Current Mods:
Borla (#140135) Cat-Back
Steeda Steel Strut Tower Brace
Most have!, Date: 5/6/2009Current Mods:
K&N Air Intake
Borla Muffler
Amazing, Date: 4/30/2009Current Mods:
complete lanzar sound system: 6.5 lanzar optidrive components, lanzar viberant 4000 watt amp, lanzar viberant 2000 watt amp, and 4 10" lanzar max subs, momo wheels, borla exhaust.
Good product, Date: 4/3/2009Current Mods:
BBK CAI kit
Borla Catback Exhaust
GREAT! GREAT! GREAT!, Date: 8/8/2008Current Mods:
-injen intake
-borla exhaust
-advanced ign. timing
-grounding throttle
Below are other popular parts other customers have purchased for their Ford Mustang.
Originating in 2001 the work force at Late Model Performance has maintained a noteworthy high level of customer service and has made available a multifarious selection of new performance automotive parts and appurtenances represented by some of the preeminent names in the automotive performance parts industry. The vehicles represented range from 1950 to the present date and our inventory is tremendous and is continually rejuvenated for the purpose of offering an incomparable number and multiplicity of parts to meet the customer's every need. Our 5-star service is an additional reason to shop at Late Model Performance. All of our Performance Auto Parts include FREE Shipping and of course 5-star award winning customer service. See what LM Performance looked like in 2003.
Shop|Brands|SALES|Contact|Customer Reviews|Status|Receipt|Returns|Cancel Request|My Account
© 2001 - 2019 Late Model Performance ® All Rights Reserved. (Privacy Policy)
