BBK
BBK Cold Air Induction System 5.0L V8
* Images may be a representation and may not reflect the actual product.
Often Purchased with this Cold Air Intake
Product Details
This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions. This BBK Cold air intake is 50 State Legal - C.A.R.B Approved
Looking for a quick and easy way to gain an additional 10 to 14 horsepower? Look no further than this cold air induction system. It features a fully hand-polished show-chrome finish, a long-lasting conical air filter, and an unmatched high-flow design for superior performance and striking good looks. Don't just take our word for it; thousands of enthusiasts from coast to coast have installed them on their cars.
As one of today’s favorite performance bolt-ons, cold air intake systems kits deliver great looks as well as real world horsepower gains.
As the originator of the first of these chrome systems back in the early nineties, our famous BBK line continues to offer the leading edge quality and function that BBK customers expect.
All BBK cold air intake systems utilize a high flow washable conical cotton element filter and most are designed as fender well units to maximize performance. In addition to our standard hand polished and chrome plated cold air intake systems, we now offer a variety of kits utilizing a custom designed lightweight aluminum inlet casting, which is hand polished and chrome plated. These trick castings deliver unmatched quality and a custom fit for a variety of auto and truck applications.
Each cold air intake model has been designed and dyno tested at the BBK headquarters in Southern California to maximize performance.
Air Induction System - Reusable Oiled Filter - Steel - Chrome Powder Coat - Fender Well Mount - Small Block Ford - Ford Mustang 1994-95 - Kit
CARB APPROVED C.A.R.B. number D-245-14
Vehicle Fitment
Please verify year, make, model, and any notes before ordering.
- 1994-1995Ford Mustang
Engine Compatibility
Small Block Ford 289/302/351W
Fitment note: Engine compatibility is provided as a guide. Please verify all fitment details before ordering.
Product Specs
- Brand
- BBK
- Part Number
- 1712
- Catalog Number
- 005771
- Product Line
- Cold Air Intakes
- Category
- Air Induction
- Type
- Cold Air Intakes
- UPC / Barcode
- 197975017123
- Vendor Product Category
- Air Intake Systems
- Vendor Product Subcategory
- Cold Air Intakes
- Length
- 16.00 in
- Width
- 11.70 in
- Height
- 9.00 in
- Weight
- 7.50 lb
- Units Per SKU
- 1
- Freight / LTL
- No
- Ship Alone
- No
- Air Restricted
- No
- Prop 65
- Y
- EPA Status
- Compliant
- CARB Approved
- Yes
- CARB EO Number
- D-245-27
- Clearance Item
- No
Shipping & Availability
This item is currently out of stock, but orders are still being accepted. Orders are fulfilled in the order received once inventory becomes available.
PROP 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Manufacturer warranty and return policy details will display here when available. Please refer to the manufacturers website for warranty information.
Reviews & Questions
Real product feedback when available, plus quick ways to get fitment or product help.
Other Popular Parts
BBK has been designing high performance parts for cars since 1988 at unsurpassed quality levels. All their parts are directly bolted on with no modifications and are covered by full BBK manufacturer’s warranty. BBK exhaust headers feature the latest computerized machining equipment resulting in superior OEM quality products.
SSI Intake Manifolds . CNC Series Exhaust Headers, CNC Series Extracter X pipes & H Pipes, SpeedWare Stainless Exhaust Components, Power+Plus Throttle Bodies, Fuel Pumps & Fuel Regulators, Cold Air Induction Intake Kits, Performance Underdrive Pulley Kits. LMPerformance also carries BBK air filters, bushings and end links, caster/camber plates, clutch adjuster kits, cold air kits, fuel pumps, fuel rails and fuel regulators, gaskets, headers and intake manifolds, as well as pipes, springs and throttle bodies.
Review our return, cancellation, shipping, warranty, and product image policies before ordering.
Contact us with questions before ordering
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
Free Shipping: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
Images: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Price Errors: In the event that a product has mistakenly been listed at an incorrect price, We reserve the right to refuse or cancel any orders placed for product listed at the incorrect price. We reserve the right to refuse or cancel any such orders whether or not the order has been confirmed and your account charged. If your payment type has already been charged for the purchase and your order is cancelled, a full refund to your orignial payment method in the amount of the incorrect price will be issued.
Special Order ITEMS: Some items are Special Ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special Ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, Special Order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns: We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special Orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order Claims All lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation: We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.