DEI
DEI Exhaust Wrap 2in x 35ft - Titanium
* Images may be a representation and may not reflect the actual product.
Product Details
DEI's ORIGINAL Titanium(TM) exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800°F direct/2500°F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II(TM). Note of Caution:Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems:DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields.
Exhaust Wrap - Titanium - 2 in Wide - 35 ft Roll - Woven Fiberglass - Titanium - Each
Titanium exhaust wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application!
010132; wrap; header; exhaust; pipe; heat protection; titanium; volcanic; basalt; lava; flexible; pliable
Titanium Exhaust Wrap; 2 ft. x 35 ft.;
DEI Exhaust Wrap 2in x 35ft - Titanium
Titanium Exhaust Wrap
TITANIUM WRAP 2x35
Exhaust Wrap Kit
Universal
Titanium Exhaust Wrap™; 2 ft. x 35 ft.;
Titanium Exhaust Wrap™
Vehicle Fitment
Universal or product-specific fitment. Please review the product details and contact us if you need help confirming fitment before ordering.
Product Specs
- Brand
- DEI
- Part Number
- 10132
- Catalog Number
- 001498879
- Product Line
- Titanium Exhaust Wrap
- Category
- Cooling
- Type
- Exhaust Wrap
- UPC / Barcode
- 607078101327
- Vendor Product Category
- Cooling
- Vendor Product Subcategory
- Exhaust Wrap
- Length
- 4.50 in
- Width
- 4.50 in
- Height
- 2.00 in
- Weight
- 1.20 lb
- Units Per SKU
- 1
- Freight / LTL
- No
- Air Restricted
- No
- Prop 65
- Y
- CARB Approved
- Yes
- Clearance Item
- No
Shipping & Availability
This item is showing available inventory. Most in-stock performance parts ship quickly, but timing can vary by warehouse, vendor cut-off time, holidays, and carrier pickup.
PROP 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Inventory shown: 498 available as of 6/4/2026.
Manufacturer warranty and return policy details will display here when available. Please refer to the manufacturers website for warranty information.
Reviews & Questions
Real product feedback when available, plus quick ways to get fitment or product help.
Other Popular Exhaust Wrap
Design Engineering, Inc. (DEI) has been in the marketplace for twenty five years with the goal of providing their customers with outstanding quality heating and noise control products. It all started in1995 with the late Dale Markley in Cleveland, Ohio, who was set on developing answers to the problems facing racing and performance drivers underhood, power-robbing heat issues. The company’s success was evident when they had to double their working space in a short time and then in 2004 had to relocate to a new facility and a larger complex. But it is no surprise that the company has been growing ever since when you consider their impressive product line.
The DEI Form-A-Shield is a perfect example of the Design Engineering ingenuity because it can be used as a barrier to reflect and insulate a multiplicity of heat sources providing primo heat protection in areas where high heat is present and may be difficult to insulate. Because it is only 3/16th of an inch thick Form-A-Shield can be custom fitted to fit in even tight quarters. Having problems with your old hood insulation well look no further than Design Engineering, Inc. for a new Precut Underhood Insulation Kit that is sure to fit perfectly with its peel and stick design for ease of installation.
Design Engineering,Inc. didn’t stop with heating products but rather tackled those noise problems in your car as well with products like their Boom Mat Damping Material that will solve all those pesky noises from vibration, squeaks and rattles regardless of the source. Its 4 mil aluminum stiffening top skin and noise constraining layer will quiet even the most difficult situations and it is easy to install with an easy peel plastic release liner.
Review our return, cancellation, shipping, warranty, and product image policies before ordering.
Contact us with questions before ordering
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
Free Shipping: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
Images: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Price Errors: In the event that a product has mistakenly been listed at an incorrect price, We reserve the right to refuse or cancel any orders placed for product listed at the incorrect price. We reserve the right to refuse or cancel any such orders whether or not the order has been confirmed and your account charged. If your payment type has already been charged for the purchase and your order is cancelled, a full refund to your orignial payment method in the amount of the incorrect price will be issued.
Special Order ITEMS: Some items are Special Ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special Ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, Special Order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns: We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special Orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order Claims All lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation: We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.