Motul
Motul 1/2L Brake Fluid DOT 5.1
* Images may be a representation and may not reflect the actual product.
Product Details
TYPE OF USE: All types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Fluidity specially designed for anti-locking brake systems (ABS). PERFORMANCES:: STANDARDS : FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 and DOT 3, SAE J 1703, ISO 4925 (5.1, 4 & 3), Long life fluid: The high wet boiling point (187C / 369F), superior to DOT 4 (155C / 311F mini) and DOT 3 (140C / 284F mini) conventional fluids enables to use this product longer. Indeed, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use., Specially designed for anti-locking brake systems (ABS): The viscosity (820 centipoises at -40C / -40F) lower than DOT 4 (up to 1800 cp) and DOT 3 (up to 1500 cp) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems. Perfectly neutral with seals used in braking systems. Anti-corrosion., RECOMMENDATIONS: Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products., Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM)., Store brake fluid in its original container, tightly closed to avoid absorption of moisture., Aggressive chemical product if contact with hands, paint or varnish., If skin contact, rinse thoroughly with water., Drain Interval: 12 to 24 month as per manufacturers recommendations. ,
Package consists of quantity: 12
TYPE OF USE: All types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Fluidity specially designed for anti-locking brake systems (ABS). PERFORMANCES:: STANDARDS : FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 and DOT 3; SAE J 1703; ISO 4925 (5.1, 4 & 3); Long life fluid: The high wet boiling point (187C / 369F), superior to DOT 4 (155C / 311F mini) and DOT 3 (140C / 284F mini) conventional fluids enables to use this product longer. Indeed, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use.; Specially designed for anti-locking brake systems (ABS): The viscosity (820 centipoises at -40C / -40F) lower than DOT 4 (up to 1800 cp) and DOT 3 (up to 1500 cp) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems. Perfectly neutral with seals used in braking systems. Anti-corrosion.; RECOMMENDATIONS: Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products.; Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).; Store brake fluid in its original container, tightly closed to avoid absorption of moisture.; Aggressive chemical product if contact with hands, paint or varnish.; If skin contact, rinse thoroughly with water.; Drain Interval: 12 to 24 month as per manufacturers recommendations. ;
Fully synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point of 516F (272C)
Long life fully synthetic fluid, poliglycol bases; Standards: FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 and DOT 3, SAE J 1703, ISO 4925 (Classes 5.1, 4 & 3); Dry Boiling Point: 269C/516F; Wet Boiling Point: 187C/369F
Motul; OEM; Approved; Fully SyntheticFMVSS 116 DOT 5.1; DOT 4; DOT 3 SAE J 1703; SAE J 1704; ISO 4925 (Classes 3;4; &5.1)
DOT 5.1 - 0.500L AM - Fully Synthetic Brake Fluid
Motul 1/2L Brake Fluid DOT 5.1
DOT 5.1 - 0.500L AM
Brake Fluid
Vehicle Fitment
Universal or product-specific fitment. Please review the product details and contact us if you need help confirming fitment before ordering.
Product Specs
- Brand
- Motul
- Part Number
- 100951
- Catalog Number
- 001379871
- Product Line
- Brake Fluid - DOT Fluid
- Category
- Brakes, Rotors & Pads
- Type
- Brake Fluid
- UPC / Barcode
- 3374650000428
- Vendor Product Category
- Brakes, Rotors & Pads
- Vendor Product Subcategory
- Brake Fluid
- Length
- 10.50 in
- Width
- 9.00 in
- Height
- 8.00 in
- Weight
- 15.65 lb
- Units Per SKU
- 12
- Freight / LTL
- No
- Ship Alone
- No
- Air Restricted
- Yes
- Prop 65
- Unknown
- CARB Approved
- Yes
- Clearance Item
- No
Shipping & Availability
This item is showing available inventory. Most in-stock performance parts ship quickly, but timing can vary by warehouse, vendor cut-off time, holidays, and carrier pickup.
PROP 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Inventory shown: 36 available as of 6/4/2026.
Manufacturer warranty and return policy details will display here when available. Please refer to the manufacturers website for warranty information.
Reviews & Questions
Real product feedback when available, plus quick ways to get fitment or product help.
Other Popular Brake Fluid
None of us have been around since 1853 but Motul has, and that is certainly a very long time to be producing motor oil. And not only have they been producing it but the team at Motul has dedicated itself to finding the perfect motor oil for a variety of uses, and they have been doing it since the beginning. Motul had a banner year in 1966 when they formulated Century 21, the very first semi synthetic motor; and the rest is history. High performance went to a new level with the discovery of semi synthetic motor oil, and this newly discovered oil was one of the catalysts for a multiplicity of victories in racing.
Motul, a company always looking toward the future, went on to produce the 300V product in 1971, the world’s original completely synthetic oil. Motul then went on to cultivate metalworking fluids and lubrication products that were needed industrially in 1989. Innovation and a regard for the people they service are the driving forces behind the Motul company and are the reasons for their impressive successes in new product development.
If you are a racer you know you need motor oil that will help you get to that finish line by improving your performance and protecting your engine at the same time. Well, Motul has partnered technically with some of the world’s most impressive teams of racers to develop a motor oil for the racing community, the 300V line of motor oils. But don’t forget about that all important brake fluid because Motul has RBF 660 brake fluid designed for racing brakes. This Motul brake fluid has extremely high dry and wet boiling points and it was created with the racer in mind for those intense temperatures to which racing brakes are exposed.
Whether you are an everyday driver or a racing aficionado Motul is sure to meet your requirements, and don’t forget all of the other equally impressive Motul products on the LMPerformance website.
Review our return, cancellation, shipping, warranty, and product image policies before ordering.
Contact us with questions before ordering
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
Free Shipping: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
Images: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Price Errors: In the event that a product has mistakenly been listed at an incorrect price, We reserve the right to refuse or cancel any orders placed for product listed at the incorrect price. We reserve the right to refuse or cancel any such orders whether or not the order has been confirmed and your account charged. If your payment type has already been charged for the purchase and your order is cancelled, a full refund to your orignial payment method in the amount of the incorrect price will be issued.
Special Order ITEMS: Some items are Special Ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special Ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, Special Order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns: We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special Orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order Claims All lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation: We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.