Revel
Revel VLS Intercooler Dual Temp Gauge
* Images may be a representation and may not reflect the actual product.
Product Details
Revel VLS 52mm 50-300 Deg F Dual Intercooler Temperature Gauge. The 52mm Revel VLS OLED Intercooler Dual Temperature gauge monitors both inlet and outlet air temperatures of the intercooler to allow for accurate readings while tuning the vehicle. The dual LED outer rings allow for quick glances of the air temperatures during driving and the OLED center display provides readings from 50 ?F up to 300 ?F of each side. Viewing comfort is maximized by utilizing the OLED display which does not require a backlight to be clearly visible at any time of the day. This is easier on the eyes than a typical LCD display that emits a harsher backlight. Included in the gauge kit are two 3/8 NPT air intake temperature sensors, universal mounting pod & visor, and wiring harnesses required for easy installation.
REVEL VLS INTERCOOLER DUAL TEMP 52mm Gauge, 50?F to 300?F Intercooler IN and Out Reading, Digital OLED Display, 28 LED Outer Ring, Temperature Sensors Included, Mounting Kit Included
The Revel VLS 2 1/16 in. (52mm) gauges allow you to keep tabs on the engines vital signs while minimizing the time spent looking away from the road. The OLED display used in the VLS gauges provide a crisp, clear display that does not require a backlight, which allows for an ultra slim profile that maximizes versatility and encourages creative mounting solutions. The numeric OLED display is accompanied by an LED ring around the perimeter of the gauge for readings at a glance.
Revel VLS gauges have been designed to connect in sequence, minimizing wiring to keep your install clean. Once the first gauge is connected, adding another is as easy as plugging in the provided harness to the original gauge and routing it to the additional gauge ? no need to connect each gauge individually to power. Each gauge comes packaged with the associated sensor, sun shade, mounting bracket, and all necessary wiring.
Maximum comfort is attained by the use of an OLED (Organic Light Emitting Diode) numerical display. When compared to a traditional LCD display, the OLED display provides sharper contrast resulting in a deeper black for a crisp, clear images that is easier to read at a glance. The technology also allows for undistorted viewing angles approaching 170 degrees. The OLED display also does not require a backlight to be clearly visible at night, which gives the slim profile of the gauge ? perfect for mounting in areas where space is an issue.
Revel VLS gauges have been designed to connect in sequence, minimizing wiring to keep your install clean. Once the first gauge is connected, adding another is as easy as plugging in the provided harness to the original gauge and routing it to the additional gauge ? no need to connect each gauge individually to power.
*Note: VLS Wideband A/F gauge and VLS Intercooler Dual Temp gauge are not daisy-chain compatible units.
Each gauge comes packaged with the associated sensor(s), sun shade, mounting bracket, instruction manual, and all necessary wiring to make the installation process as simple as possible.
*Some kits may require additional fittings or bungs for proper installation.
*Note: Installation of the air temperature sensors require 3/8 NPT weld-in bungs. These bungs are not included.
*Note: Installation of the air temperature sensors require 3/8 NPT weld-in bungs. These bungs are not included.
- (1) Intercooler Dual Temp Gauge 2 1/16 in. (52mm)
- (1) Power Harness
- (2) Air Temperature sensors and wiring harness
- (1) Mounting Pod
- (1) Sun Shade (hood)
- (1) 3M double sided tape
- (2) Mounting Bracket Threaded Extension
- (2) Washers
- (2) Nuts
- (1) Mounting Bracket
Vehicle Fitment
Universal or product-specific fitment. Please review the product details and contact us if you need help confirming fitment before ordering.
Product Specs
- Brand
- Revel
- Part Number
- 1TR1AA006R
- Catalog Number
- 001053415
- Product Line
- VLS Gauges
- Category
- Gauges & Pods
- Type
- Gauges
- Vendor Product Category
- Gauges & Pods
- Vendor Product Subcategory
- Gauges
- Length
- 4.90 in
- Width
- 4.70 in
- Height
- 4.50 in
- Weight
- 1.00 lb
- Units Per SKU
- 1
- Freight / LTL
- No
- Air Restricted
- No
- Prop 65
- Y
- CARB Approved
- Yes
- Clearance Item
- No
Shipping & Availability
This item is showing available inventory. Most in-stock performance parts ship quickly, but timing can vary by warehouse, vendor cut-off time, holidays, and carrier pickup.
PROP 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Inventory shown: 16 available as of 6/3/2026.
REVEL warrants all parts against defects in materials or workmanship under normal use and service after proper installation, (subject to the conditions and exclusions described below) for a period of one (1) year from the original consumer’s date of purchase. During the warranty period, we will, at our option, repair or replace the defective part or refund your money. This warranty does not cover labor reimbursement. This warranty is non-transferrable. Replacement parts are warranted from the date of exchange for a period of one (1) year. The following is a non-exclusive list of examples that are not considered defects: failure due to accident or collision, chemical fallout, corrosion due to salt or other environmental conditions including natural disasters; improper installation, self-installation, or modification of the part; vehicles under manufacturer’s recall for a related problem; and misuse or abuse, including off-road driving or racing.
* NOTE: BOSCH LSU 4.9 Sensor included in the Revel VLS Wideband A/F Ratio Gauge is not covered under any warranty.
THIS WARRANTY DOES NOT COVER INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS PHYSICAL INJURIES OR PROPERTY DAMAGE, LOSS OF TIME, LOSS OF USE OF THE VEHICLE, INCONVENIENCE, RENTAL VEHICLE CHARGES, TOWING CHARGES OR ACCOMMODATIONS RESULTING FROM A DEFECT IN OR FAILURE OF THE PART. THIS WARRANTY REPRESENTS THE EXCLUSIVE REMEDY FOR ANY PRODUCT DEFECT OR FAILURE AND THE MANUFACTURER MAKES NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY WARRANTY OF MERCHANTABILITY, CONDITION OF ANY KIND, OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimers of implied warranties, and in those states any implied warranty that may apply is limited to one year. If any provision of the warranty should be deemed invalid or unenforceable, the remaining terms and provisions of the warranty shall remain in full force and effect.
To file a claim: You must obtain a Return Authorization from the original place of purchase prior to returning parts for inspection for defects. Returns must accompany the original consumer’s sales receipt. The R.A. number must be written on the outside of the carton to be returned. Any carton without a proper R.A number will be refused. An R.A. does not guarantee repair, replacement or refund, only that the manufacturer will inspect the parts for defects. Returns must be sent by pre-paid freight. If an inspection is performed and the product is working properly, the customer will be responsible for the shipping return expenses.
Reviews & Questions
Real product feedback when available, plus quick ways to get fitment or product help.
Other Popular Gauges
The team at LMPERFORMANCE knows you want your prized possession to look good and perform optimally and we can provide some primo products to do just that from a trusted and inimitable source, TANABE USA, who has introduced its new brand REVEL. With thirty years of experience to rely on TANABE is able to meet the growing needs of the automotive market with blue-ribbon products to improve your car’s aesthetics and enhance its performance. Since its founding in 1982 TANABE has met the challenge of providing the car owner with top notch products and they have continued to do so with the introduction of the new REVEL line of products.
Take a look at the REVEL VLS line of OLED gauges that are designed not only for accuracy but also for exceptional clarity that is needed for keeping an eye on your engine’s performance. Because of the phenomenal clarity the REVEL VLS gauges provide there is no need for a backlight and consequently the profile is ultra slim affording greater adaptability and more innovative mounting solutions. The LED ring surrounding the gauge provides exceptional reading even at a glance and wiring is a breeze since the REVEL VLS gauges connect sequentially and minimize wiring so that once you have the first gauge connected you simply plug the remaining ones in by using the harness provided. It doesn’t get any easier than that.Enhance your car’s appearance even more with perfectly fitted dry carbon overlays that have been extensively tested so that you are assured of superior fitment over OEM pieces. REVEL was able to accomplish this by carefully analyzing and measuring the overlays from each and every angle to create a meticulous carbon mold that can easily be placed over your car’s OEM panel and this care shows once again the dedication REVEL has to customer satisfaction. REVEL has designed products that enhance your car’s ride by not only making it more comfortable but also by providing you with the ultimate in smooth performance and they accomplished this with the introduction of their coilover kit, the REVEL Touring Sports Damper system. The 32 way adjustability of the REVEL Touring Sports Damper not only affords an exceptionally low ride height but also provides equable performance which is achieved by taking advantage of the perfect balance of damping forces and spring rates. The ingenuity and dedication of REVEL to product development is manifested in product features like the TSD coilovers pillow upper mounts that replace the OED rubber bushing with a spherical bearing and an adjustable camber plate that afford improved tire traction and alignment. And on their MACPHERSON type struts teflon thrust washers are utilized in order to reduce the friction caused during steering and also eliminates spring binding and movement.In addition the spring rates are meticulously balanced to afford both comfort and that coveted sport like feel and the full length thread body with independent preload affords maximum lowering capability and larger piston valves and oil capacity provides a faster reacting dampening force through all temperatures.Review our return, cancellation, shipping, warranty, and product image policies before ordering.
Contact us with questions before ordering
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
Free Shipping: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
Images: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Price Errors: In the event that a product has mistakenly been listed at an incorrect price, We reserve the right to refuse or cancel any orders placed for product listed at the incorrect price. We reserve the right to refuse or cancel any such orders whether or not the order has been confirmed and your account charged. If your payment type has already been charged for the purchase and your order is cancelled, a full refund to your orignial payment method in the amount of the incorrect price will be issued.
Special Order ITEMS: Some items are Special Ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special Ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, Special Order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns: We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special Orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order Claims All lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation: We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.