866.567.2001 8am-5pm M-F Central

Toyota JLT

<< FIRST < PREV ...   NEXT > LAST >>
  • Toyota JLT
  • SELECT CATEGORY
SORT BY:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
JLT

JLT

About JLT

Are you ready for more power in your Ford, GM or Mopar vehicle, cars like the iconic Ford Mustang and Chevy Camaro or those notable Ford trucks? Then you have come to the right place and the team at LMPERFORMANCE knows you want to let your car’s engine breathe so that you will get the power you deserve. In order to accomplish this feat you need to get that cooler air into your engine and the indomitable cold air intake can help you do just that.

You know that a cold air intake serves the purpose of moving the air filter outside of the engine compartment and away from unnecessary heat thus it allows cooler air and more oxygen into your car’s combustion chamber and as a consequence your car has more power. But not all cold air intakes are created equal so we want to introduce you to the JLT PERFORMANCE cold air intake, which we are happy to say is made right here in the USA. JLT PERFORMANCE was founded in 2004 and is located in Chesapeake, Virginia where they manufacture not only primo cold air intakes but impressive oil separators for late model Mustangs, Camaros, Mopars and Ford Trucks.

And best of all the JLT intakes are a direct replacement on the 1996-2004 Mustangs, 1997-2003, 2015-2917 Ford trucks and 2005-2018 Mopar cars that will require no tuning. But no worries if you have a 2005 and newer Ford or Camaro because JLT has complete packages with tuners and custom tunes so you can install it all at home in less than one hour. Another thing to consider is the fact that JLT uses only the highest quality S&B reusable filter to afford you maximum filtration. You won’t find any choke points nor will there be any accordion style bends resulting in a minimum of restriction with these air intakes and because the JLT intakes only draw air from outside the engine bay your car’s engine gets maximum air density which should improve mileage under almost all driving conditions.

JLT PERFORMANCE didn’t stop with cold air intakes for you Ford, Mopar or GM Vehicle but knew that some of you who notice oil residue where the PCV Valve connects to the intake manifold would benefit from an Oil Separator so they went to work on developing that as well. JLT is cognizant of the fact that crankcase pressure can track large amounts of oil on your car’s blower rotors, intake valves and intercooler fins so they developed a uniquely designed oil separator that filters and separates the oil in the vapor so that is deposited into a catch can rather than in your car’s intake system.

The first part of the JLT filtering system is a very fine mesh stainless steel screen that is able to trap fine oil vapors then they pass this through a one half inch thick, one sixteenth inch aluminum honeycomb filter thus causing the oil to be so heavy it cannot be passed on into the intake. Although the oils separator will work on any engine JLT looked out for their Ford, Mopar and GM customers in particular by designing a plug and play set up that will work on most applications with PCV lines already attached so installation should only take about a minute..

Toyota

These are some of the items you can find at LMPerformance for your Toyota

If your Toyota doesn't have the horsepower and torque you crave it could be because of your factory installed exhaust system and installing an aftermarket performance exhaust system might be the key to more power. The type of bend used to make an exhaust results in a difference in the way air flows and an aftermarket performance exhaust can create a more efficient path for exhaust gases to escape resulting in spent fuel and air exiting the combustion chambers faster so that more fuel and air can be burned to create more power. The "crush-bend" techniques in factory exhausts drastically reduces exhaust gases replacing that with a "mandrel bend" system results in less resistance ad as a consequence improved flow of air equaling a better performing engine. The next thing to consider when choosing an exhaust system is material and most factory exhaust systems employ the use of mild steel which that deteriorates. For your FJ Cruiser, Sequoia and Tundra LMPERFORMANCE offers the formidable CORSA exhaust system with a reduction in back pressure allowing for increased horsepower and torque and improved fuel economy all of the above issues have been resolved, including the material. For the sound enthusiast, CORSA offers 3 levels of sound: X-TREME - their loudest , CORSA'S Sport systems for their mid sound level and CORSA'S Touring exhaust is their quietest system.

Another option for your 2007-12 FJ Cruiser exhaust system is the preeminent DOUG THORLEY cat-back system fabricated with extra durable 16-gauge tubing, smooth mandrel bends for maximum flow and maximum efficiency and utilizing their exclusive Aero-Flow mufflers that feature straight-thru perforated cores, without baffles or chambers producing maximum power and that signature DOUG THORLEY sound. The DOUG THORLEY Headers for your Toyota are constructed of superior 14-guage mild steel, 3/8 inch flanges and 5/16 inch collector rings and have a spectacular finish of nickel chrome plating. The Off-Road "Race" Y-pipes from DOUG THORLEY to be installed between your cat-back exhaust and headers are stainless steel and the inlet attachment is with two bolt flanges and are designed with the performance driver in mind and are not street legal on pollution controlled vehicles.

LMPerformance offers a copious array of products designed by the eminent manufacturer WEATHERTECH to protect the interior and exterior of your Toyota. The WEATHERTECH LAMPGARDS for headlight protection, specifically designed to fit for your car and the Sunroof Wind Deflectors for everything from the 4-runner to the Tundra to lessen wind noise and Side Window Deflectors , custom fit for all models from the 4-Runner to the YARIS to allow you to crack your windows in bad weather. Protect your Toyota from the elements with a WEATHERTECH All-Weather Floor Mats, Floor Liners and Cargo Liners all designed specifically for your Toyota. Again Custom fit for your Toyota 4-Runner to YARIS and perfect for any season, the TECHSHADE® by WEATHERTECH to keep you cool in the summer and help prevent frost build-up in the winter. The WEATHERTECH Tech Liner for your Tacoma and Tundra is an easy to install, custom-fit solution for protecting and preserving your pick-up truck bed, and to keep cargo away from the elements, the Roll Up Truck Bed Cover from WEATHERTECH, featuring the Auto Latch II automatic dual locking system. Mud Flaps Splash Guards for your Tacoma, Tundra and RAV 4 and offers vehicle protection from road debris and the WEATHERTECH Easy-On Stone & Bug Deflector for your Toyota to guard against stone chips and bug splats.

When choosing body parts for your Toyota, Levin(AE86), Celica, Corolla, MRS, PRIUS, Supra and MR-2 one important thing you will want to consider is the material and the reason for the addition or replacement part comes into play critically when making this decision. Installing body parts for aesthetic reasons is different from installing them for racing and as a consequence the choice of material is different. Carbon fiber parts are ideal for racing because they are exceptionally strong and lightweight and they come clear-coated and don't need to be painted. SEIBON CARBON'S specialty is the design and manufacture of high-quality carbon fiber automotive body components. For your Toyota Celica, MRS, PRIUS and Supra your will find Bumper (Front Spoilers), Trunk Panels for your Celica, MRS, PRIUS, Supra and Corolla, Bumper (Rear Lip) for your PRIUS, Doors for your Corolla and Supra, Fenders for your Celica and Supra, Hoods for your Celica, MRS, PRIUS, Supra, Corolla, Levin(AE86) and the MR-2, Rear Wings for your Celica, and Side Skirts for your PRIUS all made in the SEIBON CARBON'S inimitable quality.

Don't want Carbon Fiber parts then take a look at the potpourri of body parts available from the incomparable manufacturer Extreme Dimensions made of the revolutionary DURAFLEX that incorporates fiberglass, plastic, and flex resins to obtain its uniqueness resulting in a much higher durability rate than the normal fiberglass product and they come complete with a black primer finish for easy painting, hardware kit, and an installation guide.

If your Toyota clutch is slipping, sticking or is stiff or if you just want to upgrade to a higher performance clutch for racing, drag, autocross or rally driving consider a performance clutch by the inimitable SPEC. The SPEC street high performance and racing clutches and flywheels are manufactured in multitudinous Kits, from street kits to race to the SPEC Super Twin with TQ ratings of over 1500 FT TQ ! Peruse the following information before deciding on the best SPEC Clutch Kit for your Toyota IJZ-GTE, 4-Runner, ALTEZZA, Camry, Celica, Corolla, Corona, Cressida, Crown, Echo, FJ Cruiser, GALANZA, Hi-LUX, Land Cruiser, Mark II, Matrix, MR-2, PASEO, Pick Up, PREVIA, RAV 4, SOARER, SOLARA, Starlet, Stout, Supra, T-100, Tacoma, TERCEL, Tundra, Van and YARIS. The kits are available in various stages depending on your driving needs and are described in detail on the LMPERFORMANCE web site. Whatever your desire, whether it be street driving or track/off-road. drag, autocross or pulling you are sure to find a SPEC Clutch for your model whether it be for a 4-Runner, Pick Up, Camry, Corona or some other model and be assured they will meet and exceed your needs. And for your 1JZ-GTE SOARER Supra, Celica, MR-2, SOARER and Supra there is the Super Twin Disk Kit with near-stock drivability, increased life, a no shimming/setup bolt-in install and maintenance free operation. The SPEC Pressure plates, Flywheels, Flywheel Friction Plates, and Clutch Disks are also sold separately and are available in various Stages on the web site. Just use the drop down boxes to see what is available for your model and year Toyota.

^

LM Performance Shopper Approved Reviews