Skoda JLT

x RESET CAR

  • JLT

  • Are you ready for more power in your Ford, GM or Mopar vehicle, cars like the iconic Ford Mustang and Chevy Camaro or those notable Ford trucks? Then you have come to the right place and the team at LMPERFORMANCE knows you want to let your car’s engine breathe so that you will get the power you deserve. In order to accomplish this feat you need to get that cooler air into your engine and the indomitable cold air intake can help you do just that.

    You know that a cold air intake serves the purpose of moving the air filter outside of the engine compartment and away from unnecessary heat thus it allows cooler air and more oxygen into your car’s combustion chamber and as a consequence your car has more power. But not all cold air intakes are created equal so we want to introduce you to the JLT PERFORMANCE cold air intake, which we are happy to say is made right here in the USA. JLT PERFORMANCE was founded in 2004 and is located in Chesapeake, Virginia where they manufacture not on...Read More

<< FIRST < PREV

Page: 1 of 2

  • Skoda JLT
  • SELECT CATEGORY
SHOW UNIVERSAL: SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 2

JLT

About JLT

Are you ready for more power in your Ford, GM or Mopar vehicle, cars like the iconic Ford Mustang and Chevy Camaro or those notable Ford trucks? Then you have come to the right place and the team at LMPERFORMANCE knows you want to let your car’s engine breathe so that you will get the power you deserve. In order to accomplish this feat you need to get that cooler air into your engine and the indomitable cold air intake can help you do just that.

You know that a cold air intake serves the purpose of moving the air filter outside of the engine compartment and away from unnecessary heat thus it allows cooler air and more oxygen into your car’s combustion chamber and as a consequence your car has more power. But not all cold air intakes are created equal so we want to introduce you to the JLT PERFORMANCE cold air intake, which we are happy to say is made right here in the USA. JLT PERFORMANCE was founded in 2004 and is located in Chesapeake, Virginia where they manufacture not only primo cold air intakes but impressive oil separators for late model Mustangs, Camaros, Mopars and Ford Trucks.

And best of all the JLT intakes are a direct replacement on the 1996-2004 Mustangs, 1997-2003, 2015-2917 Ford trucks and 2005-2018 Mopar cars that will require no tuning. But no worries if you have a 2005 and newer Ford or Camaro because JLT has complete packages with tuners and custom tunes so you can install it all at home in less than one hour. Another thing to consider is the fact that JLT uses only the highest quality S&amp;B reusable filter to afford you maximum filtration. You won’t find any choke points nor will there be any accordion style bends resulting in a minimum of restriction with these air intakes and because the JLT intakes only draw air from outside the engine bay your car’s engine gets maximum air density which should improve mileage under almost all driving conditions.

JLT PERFORMANCE didn’t stop with cold air intakes for you Ford, Mopar or GM Vehicle but knew that some of you who notice oil residue where the PCV Valve connects to the intake manifold would benefit from an Oil Separator so they went to work on developing that as well. JLT is cognizant of the fact that crankcase pressure can track large amounts of oil on your car’s blower rotors, intake valves and intercooler fins so they developed a uniquely designed oil separator that filters and separates the oil in the vapor so that is deposited into a catch can rather than in your car’s intake system.

The first part of the JLT filtering system is a very fine mesh stainless steel screen that is able to trap fine oil vapors then they pass this through a one half inch thick, one sixteenth inch aluminum honeycomb filter thus causing the oil to be so heavy it cannot be passed on into the intake. Although the oils separator will work on any engine JLT looked out for their Ford, Mopar and GM customers in particular by designing a plug and play set up that will work on most applications with PCV lines already attached so installation should only take about a minute..

Skoda

These are some of the items you can find at LMPerformance for your Skoda

Exhaust systems and performance mufflers don’t add power – they improve efficiency and that means your Skoda engine gets as much energy as possible. By replacing your Skoda exhaust system and muffler with a performance system you might improve power by as much as three percent and if you drive the exact same way you did before the installation, you’ll see a three percent improvement in fuel economy. For Skoda custom muffler needs, FLOWMASTER, whose mufflers give top notch performance and great sound levels and tones. FLOWMASTER is especially noted for their FLOWMASTER 40 series muffler, with its original FLOWMASTER sound and tone and they create a line of high-performance "chambered" mufflers renowned in the industry.

Never Replace Your Skoda Air Filter Again with the K & N OE replacement air filter because they are washable and reusable and regardless of what you’ve heard, it’s almost impossible to wash your K&N Air Filter too much. The E Series Round Air filter for your Skoda are made of cotton gauze, have exceptionally high air flow and filtration, need cleaning only after 50,000 miles in most cases and comes with a million mile limited warranty.

The catalytic converter in your Skoda vehicle can become faulty as a result of damage by leaded fuel or some additives which gather on the ceramic coating rendering them useless and in need of replacement In order to have this fixed by your dealer you will be presented with quite a bill but consider doing it yourself with an aftermarket converter. To be a do-it-yourselfer you should consider first the type of emissions system you have in your Skoda and this information can be found under the hood or near the firewall area behind the engine. The state you will register your Skoda in should be considered because states vary when it comes to emission requirements. It is also expedient to know what type of emission was on your Skoda from the factory by checking the sticker under your hood, for off-road use only on your Skoda try the Stainless Works 3-inch Metal Matrix Hi-Flow Catalytic Converter. The Hi-Flow Metal Matrix 200 cell Catalytic Converter. 10-3/4" overall length with 4" Body diameter, 3" ID inlet and 3" OD outlet are the highest flowing, most durable cats on the market. These cats are recommended for high horsepower, nitrous, supercharged and turbo charged applications.

For better performance when shifting whether on the street or at the track replace your old clutch with a new clutch from SPEC, whether your need is for a full clutch kit or clutch disk clutch pressure plate, flywheel friction plate or flywheel you can' get better than SPEC for your Octavia, 1U, 1Z, or Superb. You can make the clutch meet your driving habits rather than having to conform to the stock driving habits forced upon you by your manufacturer's brand clutch. For those of you who race you know the clutch needs to be able to grab well during launch if it isn't then you need heavier clamping force and Spec gives that to you.

^

LM Performance Shopper Approved Reviews