866.567.2001 8am-5pm M-F Central

Plymouth Russell

<< FIRST < PREV ...   NEXT > LAST >>
  • Plymouth Russell
  • SELECT CATEGORY
SORT BY:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Russell

Russell

About Russell

Russell Performance is a division of Edelbrock, a company that was founded in 1938, so you can see Russell Performance has quite a history to speak for it in its parent company. And its place in the aftermarket performance parts industry is recognized as one of the premier performers in this genre. The acquisition of Russell Performance Plumbing in 2000 by the well established and successful Edelbrock company provided an entry for them into the aftermarket performance parts industry in the genre of fittings and hoses.

The rest of course is history and a successful one for Russell Performance with its repertoire of parts like hoses, hose ends and adapter fittings. Examining some of their product line will help acquaint you with their outstanding products. For those of you who needed high performance brake applications Russel developed products like the PowerFlex stainless steel high pressure braided hose with a PTFE inner liner for corrosion and with the abrasion resistance of stainless steel braid and the PowerFlex Endura hose ends featuring only the best alloy steel.

And for you racers Russell offers a Competition Brake Hose assembly for superior braking and a firmer pedal feel and of course they are made from superior quality stainless steel with zinc plated hose ends and, of course, are pre-assembled but they are Non-DO.T. approved so they are only for off-road use. The Street Legal Clutch Hose KIts have a PTFE inner liner and stainless steel braid so no hose expansion here and their sui generis Endura finish is corrosion resistant and has better clutch performance and a firmer pedal feel.

Need a street legal brake hose kit? Well Russell has just the one for you with their Street Legal Brake Hose Kit that is direct bolt-on and offers the epitome of braking performance because replacing your old rubbers hose with the street legal brake hose reduces brake hose expansion for more dependable braking. And of course Russell offers a Universal Brake Hose Assembly with their PowerFlex Stainless Steel Braided Hose and plated hose ends.

The Heat Sink Transmission Coolers by Russell lower temperature from your transmission and fluid and do not rely on direct air flow and are designed to reduce spikes in temperature and the low profile design affords you multiple mounting positions and locations. And Russel thought of your fuel management needs with the development of carb inlet kits, fuel hose kits, fuel system kits, billet y blocks and a multiplicity of other parts for your fuel management. The nitrous line by Russell is especially designed for you nitrous users and offers nitrous adapters, flare to flare y fittings and stainless steel nitrous and fuel hoses.

Russell Performance has a top notch team dedicated to research and development of products that make your car run better and as you can see from the variety of products they have been hard at work. This coupled with access to the most up to date tools assures you of a top of the line product and the rigorous testing program employed by the company guarantees their customers a quality and long lasting product.

Plymouth

These are some of the items you can find at LMPerformance for your Plymouth

Crossover pipes, designed to balance the exhaust flow on dual systems, can diminish uneven exhaust flow from the two banks of engine cylinders by giving exhaust pulses a pathway to travel between the two sides of the dual exhaust system thus reducing backpressure by preventing an exhaust build-up on either side of the system. The quintessential manufacturer of crossover pipes, PYPES, produces pipes with high quality, exceptional design and performance. They are a certified winner when it comes to bumping up the horsepower of your Plymouth daily driver or race car. The Driveshaft Tunnel X crossovers fit a variety of classic cars that are prone to limited ground clearance. There’s no skimping on materials here because all crossovers are constructed of 409 stainless (304 polished stainless option) and include dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent allowing for the maximum flow of exhaust gasses, which boosts acceleration. The Stainless material resists corrosion and extends the life of your X-pipe.

Owning a manual-shift car can be lots of fun but all of that on-off-on clutch-shifting action does eventually wearing them out and letting it go too far can cause the flywheel to get eaten up. If your Plymouth is experiencing one of these symptoms it might be time for a new clutch or a clutch repair. You might see your Plymouth clutch disengaging faster than usual. acceleration might be slower or you might smell a burning clutch, or the clutch might not be disengaging when the pedal is pushed or the pedal may be stiff and won’t disengage the clutch. Or better yet you might just want a performance clutch for your off the road or racing Plymouth. LMPerformance can help you with either, a repair or improvement, by offering you the quintessential SPEC clutch. SPEC is a consummate manufacturer of street high performance and racing clutches and flywheels. Featuring Clutch Kits From street kit Stage 1, 2, 2+, 3, and 3+ to Race Kits Stage 4 and 5. And now the SPEC Super Twin with TQ ratings of over 1500 FT TQ. And if you don't need a full kit you can purchase the SPEC Clutch Pressure Plate or Clutch Disk separately and we also offer a line of SPEC flywheels for your Plymouth that are manufactured and developed for specific driving environments and recommended based on application.

If you want to boost the rate of exhaust flow out of your Plymouth Prowler engine and give it a covetable look check out the inimitable STAINLESS WORKS headers. Stainless Works SHORTY Headers with Hi-Flow Cats or Off-Road Pipes and Long Tube Headers are custom built headers fabricated with top quality stainless steel and are factory connect for simple installation.

The interior of a car that is parked outdoors on a hot sunny day can reach temperatures of up to 194 °F and that is hot by any standard but you can protect the inside of your car and help decrease the internal temperature by installing a TECHSHADE from the prestigious WEATHERTECH. Specially fitted for your Plymouth vehicle it can be easily removed and stored by rolling it up and securing it with the Hook & Loop strap.

Better vehicle stability, improved control, and possibly a smoother ride can result by upgrading the shocks on your Plymouth vehicle. This is particularly true in situations where there is an aggrandized level of ground variation -- such as racing or off road driving. If you are using your Plymouth vehicle for these purposes, then you require shocks that are built for incontrovertibly greater impact dampening. KONI has been the preeminent manufacturer of performance and adjustable shocks in the world and they introduced the industry's very first adjustable shock absorber, electronic drag racing shocks and today's patented FSD (Frequency Selective Damping) street shocks. KONI shocks are made from the zenithal quality raw materials and machined to the highest tolerances and this quality is represented not only by KONI'S long heritage in motor sports but has also afforded KONI the ability to offer a limited lifetime warranty on many of its shocks. KONI makes a broad range of product lines to deliver upgraded performance in handling and ride quality to cars and trucks driven on paved roads. Find the shock you need for your Plymouth vehicle and see the difference a KONI shock can make.

^

LM Performance Shopper Approved Reviews