866.567.2001 8am-5pm M-F Central

Nissan JLT

<< FIRST < PREV ...   NEXT > LAST >>
  • Nissan JLT
  • SELECT CATEGORY
SORT BY:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
JLT

JLT

About JLT

Are you ready for more power in your Ford, GM or Mopar vehicle, cars like the iconic Ford Mustang and Chevy Camaro or those notable Ford trucks? Then you have come to the right place and the team at LMPERFORMANCE knows you want to let your car’s engine breathe so that you will get the power you deserve. In order to accomplish this feat you need to get that cooler air into your engine and the indomitable cold air intake can help you do just that.

You know that a cold air intake serves the purpose of moving the air filter outside of the engine compartment and away from unnecessary heat thus it allows cooler air and more oxygen into your car’s combustion chamber and as a consequence your car has more power. But not all cold air intakes are created equal so we want to introduce you to the JLT PERFORMANCE cold air intake, which we are happy to say is made right here in the USA. JLT PERFORMANCE was founded in 2004 and is located in Chesapeake, Virginia where they manufacture not only primo cold air intakes but impressive oil separators for late model Mustangs, Camaros, Mopars and Ford Trucks.

And best of all the JLT intakes are a direct replacement on the 1996-2004 Mustangs, 1997-2003, 2015-2917 Ford trucks and 2005-2018 Mopar cars that will require no tuning. But no worries if you have a 2005 and newer Ford or Camaro because JLT has complete packages with tuners and custom tunes so you can install it all at home in less than one hour. Another thing to consider is the fact that JLT uses only the highest quality S&B reusable filter to afford you maximum filtration. You won’t find any choke points nor will there be any accordion style bends resulting in a minimum of restriction with these air intakes and because the JLT intakes only draw air from outside the engine bay your car’s engine gets maximum air density which should improve mileage under almost all driving conditions.

JLT PERFORMANCE didn’t stop with cold air intakes for you Ford, Mopar or GM Vehicle but knew that some of you who notice oil residue where the PCV Valve connects to the intake manifold would benefit from an Oil Separator so they went to work on developing that as well. JLT is cognizant of the fact that crankcase pressure can track large amounts of oil on your car’s blower rotors, intake valves and intercooler fins so they developed a uniquely designed oil separator that filters and separates the oil in the vapor so that is deposited into a catch can rather than in your car’s intake system.

The first part of the JLT filtering system is a very fine mesh stainless steel screen that is able to trap fine oil vapors then they pass this through a one half inch thick, one sixteenth inch aluminum honeycomb filter thus causing the oil to be so heavy it cannot be passed on into the intake. Although the oils separator will work on any engine JLT looked out for their Ford, Mopar and GM customers in particular by designing a plug and play set up that will work on most applications with PCV lines already attached so installation should only take about a minute..

Nissan

These are some of the items you can find at LMPerformance for your Nissan

LMPerformance carries parts for 60 Nissan models and yours is one of them whether it be one of the fastest Nissan's ever produced like the 200SX, the 240SX, or the Pulsar, or one of the most popular like the ALTAMA, Pathfinder or Frontier. For your Nissan ALTIMA, 370Z and 350Z there are The EIBACH PRO-KIT performance springs, the perfect answer for most frequently-driven street cars to dramatically improve both a vehicle's performance and appearance. PRO-KIT precisely lowers your car's center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. Or the EIBACH SPORTLINE springs for your Nissan 200SX, 350Z or your 370Z the extreme-performance spring set created for the extreme enthusiast - the one who craves a race-car attitude for maximum street performance - with the lowest possible drop, but with the exceptional ride quality you expect from EIBACH. Or the B&G lowering springs that are wound from high tensile Chromium-Silicone wire purchased from Europe’s premium mines and cold wound on CNC coilers; heat treated and shot peened for longevity; and finished with phosphate treatment and a baked on resin powder coating for a hard corrosion resistant shell. Just use our 24 hour online service to find the right EIBACH or B&G springs for your Nissan model.

Your Nissan Skyline, SENTRA, Maxima, 240SX, 300Z and original equipment radiator only channels away about 30 percent of the heat generated by your engine but efficiently managing the heat effectively will benefit your Nissan by making it more efficient in terms of horsepower and will result in better use of your performance modifications, Aftermarket MISHIMOTO radiators expand cooling capacity and are designed to outperform your original radiator. The diameter of the cooling tubes is the determining factor in greater efficiency and copper/brass cooling tubes must be small because the material isn't rigid enough to support wider-diameter tubes but the strength provided with Aluminum allows for broader cooling tubes, providing greater surface area, which increases heat transfer capacity. The MISHIMOTO brand is an outstanding cooling system affording you a cooler engine and lifetime warranty and they are application specific and can directly fit on your Nissan,

The Original Equipment headers for your Nissan are ordinarily designed to take up a minimum of space and aftermarket performance headers are installed in order to boost the rate of exhaust flow out of your Nissan engine. The tubes on aftermarket performance headers are generally bigger in diameter than the runners on a manifold and they are mandrel bent to assure the opening of the pipe stays the same radius where it curves. American Racing Headers are engineered and constructed using 304 Stainless Steel and are fabricated with precision cut, 3/8-inch warp-resistant and leak-free stainless steel flanges. The primary tubes are individualized for your specific engine output to prevent any concession being afforded to a tight engine bay. And for your 350Z there is the inimitable Billy Boat Exhausts with exhaust systems that look good as well as sound good. B&B products are polished to a showroom finish and the exhaust systems are available with several different tip styles. Need a dual exhaust for your 350Z then try INVIDIA Gemini, designed for primarily dual exhaust vehicles. As with all INVIDIA Exhausts, the Gemini cat-back exhaust systems combine are exceptional in quality and design and the performance is outstanding. The INVIDIA Gemini exhaust system, with its high quality mandrel-bent stainless steel tubing, robot-TIG welding and polished finish are sure to meet your Nissan needs. The Invidia Gemini muffler gives your Nissan a deep and toned exhaust sound without being excessively loud. The INVIDIA Gemini exhaust systems are of a Cat-Back design which replace all the piping from underneath your vehicle after the catalytic converter. Most INVIDIA Gemini cat-back exhausts are available in 3 tip styles: rolled stainless steel tips, rolled titanium tips, straight titanium tips. And for your 370Z there is DC Sports Headers of T304SS stainless and/or T409SS ceramic coated for protection and finish, plus the Intake is high flow, open element.

Body kits make your Nissan 350Z and 370Z visually more aggressive - a plus when it comes to drawing attention on the street, or even in a parking lot. DURAFLEX aerodynamics, a miscellany of fiberglass, plastic, and flex resins creating sui generis features that provide an extraordinarily durable product that ships well and can withstand abuse. For better road handling and race Performance the addition of body parts by DURAFLEX are a proven winner when it comes to improve aerodynamics.

^

LM Performance Shopper Approved Reviews