866.567.2001 8am-5pm M-F Central

Mini Cooper 3D Maxpider

<< FIRST < PREV ...   NEXT > LAST >>
  • Mini Cooper 3D Maxpider
  • SELECT CATEGORY
SORT BY:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
3D Maxpider

3D Maxpider

About 3D Maxpider

The 3D MAXpider brand by U-Ace, Inc. is noted for an assortment of products to help protect your car, including some impressive car mats and liners. And while things like car mats and car liners are certainly not as important as a lot of things in your car they can certainly make a difference when it comes to protecting that expensive and difficult to replace car carpeting.

The 3D MAXpider brand of car liners has become popular because of its carbon-fiber textured pattern and the fiber backing that stays in place because of its tremendous gripping ability. And the 3D MAXpider liners all have three layers, the top one for protection as well as aesthetics, the middle for comfort and noise reduction and the bottom layer for its non-skid properties. The only difference in the various styles is that the top layer will vary depending on the style you choose..

The Kagu, for example, is a rubberized liner that is perfect for even the harshest conditions whether it be work, dirt, snow, spills or maybe a day at the beach. The Kagu surface layer is made of Thermoplastic Rubber but it has a carbon fiber texture that gives it a more chic look.

The Elegant, on the other hand, is a plush carpeted liner that is aesthetically pleasing yet easy to clean. And finally, the Classic is 3D MAXpider’s older carpet. All of the 3D MAXpider floor mats and liners are super easy to install and fit perfectly, and the raised edges on the liner keep dirt and spills trapped where they fall for easy cleanup.

Mini

These are some of the items you can find at LMPerformance for your Mini

The original Mini was a line of iconic British small cars manufactured by the British Motor Corporation from 1959 until 2000 with models like the Morris Mini-Minor and the Austin Seven, the Countryman, Moke,1275GT and Clubman and the Performance versions Cooper, named for racing legend John Cooper. The original two-door Mini continued in production until 2000. The Mini was originally a product of the British Motor and was ultimately purchased by BMW. In 2000. LMPerformance has the parts you need for your Mini Clubman, Cooper, Countryman, Hardtop, Mini, Mini S, Roadster, PACEMAN, John Cooper Works, and Cooper S.

If you want a better ride on your Mini Cooper S try the aftermarket performance B&G Suspension Sport Lowering Springs fabricated to improve handling while maintaining safety and ride quality because they are wound from high tensile Chromium-Silicone wire, cold wound on CNC coilers, heat treated and shot peened for longevity; and finished with phosphate treatment and a baked on resin powder coating for a hard corrosion resistant shell. The center of gravity was lowered by .5 to 2.5 inches on these springs and they have a progressive spring rate design to improved ride quality and handling.

Coilovers, springs that go over your shocks, permit the lowering of your vehicle and as a result help to lessen body roll. The R1 and R2 Coil-Over Kits for your Clubman and Cooper from the esteemed manufacture EIBACH are a mono tube design with 46mm pistons for maximum performance, bodies that are stainless steel to resist corrosion and provide durability and spring rates that can be tuned with a wide range of available ERS Springs. The EIBACH coil-over kits, unlike springs, allow you to tune each corner weight precisely for unprecedented balance affording the ultimate in cornering power and also offering a range of damping adjustments for comfort - perfect for racers and performance drivers. For still finer performance driving and to further reduce body roll install ANTI-ROLL performance Sway Bars from EIBACH that are much stiffer than your stock sway bar and result in improved performance handling and corner gripping. For the Cooper and Clubman who only want a great looking car for street driving, Lowering Springs from EIBACH can serve to make your car have that muscle car look and also result in reducing the total drag on your vehicle for better performance and greater fuel economy.

Better aerodynamics, a great look, improved performance are all a result of adding body parts to your Mini Cooper especially from the outstanding DURAFLEX brand. For a great look add a Roof Wing Spoiler or for better aerodynamics and to improve down force levels choose a Body Skirt or a Rear Diffuser or a Full Body Kit; all made with the inimitable DURAFLEX combination of flex resins, plastic and fiberglass for the ultimate in durability.

Unrestricted air flow equals better performance and you can have that for your Cooper with a primo BORLA Exhaust System, designed specifically for your vehicle with outstanding quality stainless steel inside and out, a less restrictive system, exclusive Inter-cooled Tips and installation that is doable in about two hours

^

LM Performance Shopper Approved Reviews