Hyundai Scoupe K&N Engineering Air Filters - Drop In

x RESET VEHICLE

  • K&N Engineering

  • Shop our extensive catalog of Cold Air Intakes and Air Filters.

    K&N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

    GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

    GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

    Product lines include: K&N Fuel Injection Kits, FIPK, K&N 77 Series High Flow Air Intakes, K&N Typhoon Air Intake Systems, K&N AirCharger, K&N 57i Air Induction Kits, K&N Cold Air Intake Filters, and Stock Replacement Air Filters.

    Back as far as 1969 K&N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K & N products can be found in more than thirty countries around the world. There is a reason K & N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

    If you need more power, consider the gains that can be achieved by installing a K&N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K & N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K & N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

<< FIRST < PREV

Page: 1 of 21

  • Hyundai Scoupe K&N Engineering Air Filters - Drop In
  • SELECT CATEGORY
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 21

K&N Engineering

About K&N Engineering

Shop our extensive catalog of Cold Air Intakes and Air Filters.

K&amp;N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

Product lines include: K&amp;N Fuel Injection Kits, FIPK, K&amp;N 77 Series High Flow Air Intakes, K&amp;N Typhoon Air Intake Systems, K&amp;N AirCharger, K&amp;N 57i Air Induction Kits, K&amp;N Cold Air Intake Filters, and Stock Replacement Air Filters.

Back as far as 1969 K&amp;N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&amp;N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K &amp; N products can be found in more than thirty countries around the world. There is a reason K &amp; N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

If you need more power, consider the gains that can be achieved by installing a K&amp;N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&amp;N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K &amp; N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K &amp; N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

Hyundai

These are some of the items you can find at LMPerformance for your Hyundai

Look no further than Late Model Performance for parts specifically designed for your Hyundai,

parts like Clutch Disks, Clutch Kits, Clutch Pressure Plate, Bumper (Front), Bumper (Rear),Light Guards, Sunroof Wind Deflectors, Window Deflectors, Springs, Air Filters, Cold-Air Kits, Cargo Liners, Front Floor Liner, Front Rubber Floor Mats, Rear Floor Liners and TECHSHADES and Body Kits, just to name a few,

Take a look at the Body Kits for your Hyundai ELANTRA from Extreme Dimensions for revolutionary aerodynamic features; such as, the combination of fiberglass, plastic, and flex resins and a black primer finish so vital to a good paint job. And the hardware kit, and installation guide make installing your parts manageable. This revolutionary product allows the consumer to receive a premium fiberglass product at an affordable price.

Is an aftermarket exhaust system the right investment for you? Are you interested in a great sound and increased power and increased performance? If the answer is yes, then you have come to the right place. Late Model Performance carries a variety of exhaust systems for your Hyundai from some of the most esteemed names in the aftermarket exhaust business, names like BORLA, Agency Power and MAGNAFLOW. The BORLA Cat-Back system, Header and Rear Section Exhaust is constructed of aircraft-quality austenitic stainless steel and is stainless inside and out because it is the most resistant to corrosion culminating in a long-lasting and resilient exhaust system. Bigger is not always better because big pipes can divest the exhaust of energy and additionally big pipes aggrandize the low frequencies culminating in uncomfortable roaring or droning sound. The BORLA exhaust system is less restrictive and preserves the velocity and high frequency so the dominant sound is behind the tailpipe where it belongs and in addition to that BORLA’S sui generis Inter-cooled Tips have an idiosyncratic look and are seen ubiquitously on show and street cars providing your vehicle with the same idiosyncratic look as these winners. The Agency Power brand of exhausts such as their mufflers are made of full titanium. From the stainless steel TIG robotic welding to the completely polished piping Agency Power produces top of the line products and Agency Power does in-depth product testing and does racing and quality checks before production, resulting in a product you can trust for your performance vehicle. MAGNAFLOW catalytic converters, exhaust systems, x- pipes and mufflers for your performance car are manufactured in the USA with premium components and their thirty years of experience results in a quality product backed up by a reliable company. The MAGNAFLOW muffler has a perforated stainless steel core, mesh wrap and acoustical fiber and comes with a lifetime guarantee. Let the experienced staff at LMPERFORMANCE help you select the right exhaust system for your model and year Hyundai or peruse the information available online 24 hours a day, 7 days a week and find the quintessential exhaust system.

The performance driver wants immediate response, reduced body roll, increased stability, enhanced cornering ability and a lower, more muscular look in their vehicle and who doesn't want better fuel economy. Installing aftermarket springs can result in better fuel economy and are generally lower and EIBACH’S Pro-kit springs are typically one inch lower than its original parts. When you install this kit the body ends up riding lower on the wheels and lowering the body reduces the frontal area of the vehicle which, when multiplied by the drag coefficient, reduces the total drag for the vehicle and this can result in greater fuel efficiency, an unexpected bonus at today's fuel costs. EIBACH is one of the leading manufacturers of aftermarket suspension components and uses high-strength spring-steel alloys, an advanced CNC winding process, and offers high-quality corrosion protection and the EIBACH engineers tune the individual components to provide more direct handling and greater predictability. EIBACH has a Quality Control System that is certified by the highest ISO 9001:2000 international quality standard and operates in accordance to its own, often more rigid, specifications.

LMPERFORMANCE carries a wide selection of EIBACH parts, including EIBACH springs, EIBACH Coil over kits, EIBACH shocks, EIBACH suspension kits, EIBACH Lowering kits, EiIBACH sway bars and EIBACH wheels for select Hyundai car and, of course, a great price and with free shipping.

^