2017 Ford F-Series Truck K&N Engineering Air Filters - Direct Fit

x RESET CAR

  • K&N Engineering

  • Shop our extensive catalog of Cold Air Intakes and Air Filters.

    K&N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

    GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

    GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

    Product lines include: K&N Fuel Injection Kits, FIPK, K&N 77 Series High Flow Air Intakes, K&N Typhoon Air Intake Systems, K&N AirCharger, K&N 57i Air Induction Kits, K&N Cold Air Intake Filters, and Stock Replacement Air Filters.

    Back as far as 1969 K&N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K & N products can be found in more than thirty countries around the world. There is a reason K & N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

    If you need more power, consider the gains that can be achieved by installing a K&N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K & N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K & N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

<< FIRST < PREV ...   NEXT > LAST >>
  • 2017 Ford F-Series Truck K&N Engineering Air Filters - Direct Fit
  • SELECT CATEGORY
  • SELECT BRAND
  • 2017 Ford F-Series Truck K&N Engineering Air Filters - Direct Fit
SHOW UNIVERSAL: SORT BY:
VIEW:

K&N Engineering

About K&N Engineering

Shop our extensive catalog of Cold Air Intakes and Air Filters.

K&amp;N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

Product lines include: K&amp;N Fuel Injection Kits, FIPK, K&amp;N 77 Series High Flow Air Intakes, K&amp;N Typhoon Air Intake Systems, K&amp;N AirCharger, K&amp;N 57i Air Induction Kits, K&amp;N Cold Air Intake Filters, and Stock Replacement Air Filters.

Back as far as 1969 K&amp;N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&amp;N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K &amp; N products can be found in more than thirty countries around the world. There is a reason K &amp; N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

If you need more power, consider the gains that can be achieved by installing a K&amp;N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&amp;N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K &amp; N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K &amp; N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

Ford

These are some of the items you can find at LMPerformance for your Ford

The Ford Motor Company, founded by Henry Ford on June 16, 1903 and based in Dearborn, Michigan, is an American automaker and the world's fifth largest automaker based on worldwide vehicle sales. It is one of the most profitable companies in the world, as well as being one of the few to survive the Great Depression and it is the largest family-controlled company in the world, having been in continuous family control for over 110 years. Ford now encompasses two brands: Ford and Lincoln. Late Model Performance can provide parts for 54 models of these American icons whether for street use, racing or off-road the answer to your quest is here.

The quintessential Mustang is well represented at Late Model Performance with a capacious array of parts for chassis and suspension, drive train and transmission, electronics and tuners, interior and exterior accessories, engine components, exhausts, gauges, lighting and induction parts. With body kits from Street Scene, 3dCarbon, RK Sport, Xenon, DURAFLEX, Couture, Carbon Creations the proud Mustang owner has a wide array of types of kits to choose from. The first thing you need to do is decide on the type of material whether fiberglass, polyurethane, ABS plastic, carbon fiber and composite. Polyurethane parts, like the ones manufactured by 3dCarbon, Xenon, Couture and RK Sport, are heavier than fiberglass, not necessarily ideal for racing if weight reduction is the main objective; plus, specialized preparation is required for paint to adhere correctly and it is susceptible to warping under extreme heat. It is; however, extremely flexible, virtually unbreakable and resistant to abrasion and temperature, oil, gasoline and other solvents. Carbon fiber parts, like the one available from the renowned manufacturer Carbon Creations, are ideal for racing because of their extreme strength and light weight; plus, they come clear-coated and don't need to be painted. The significant downside to carbon fiber is its higher cost of production resulting in a more expensive product. The composite creation by Extreme Dimensions, DURAFLEX, is an excellent choice because it is a unique blend of flex resins, fiberglass and plastic that is much stronger than fiberglass and has maximum flexibility; and additionally, it comes with a black primer finish for ease of painting.

Bumping up the horsepower on your Mustang just makes sense and Late Model Performance can help you do that with PYPES’ Exhaust systems, one of the paramount manufacturers of exhaust systems on the market for price and superior quality. PYPES' Mustang exhaust products are made of stainless steel materials for quality and durability and PYPES crossover pipes include dual 409 stainless reinforcement plates at the welds where they are needed most and all pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. With the conjunctive Crossover design it is not unusual to see an increase of anywhere between fifteen and twenty-five HP. A straight path is afforded by the Open Port Exhaust when it is uncapped; however, but you still benefits from the crossover technology and can expect between ten to fifteen HP. An options that is available on this system is the PYPES PYPE Bomb which utilizes a unique louvered core resonated dual wall 304 stainless tip to give you that American Muscle Car sound but not that popping associated with other lesser kits.

The Loudmouth Exhaust by SLP Performance has transformed many cars like the CAMARO SS into modern muscle machines and you can do that too for your Ford car whether it is a CAMARO or not. The exceptional properties; such as exceptional flow characteristics, lighter weight, ease of installation, stainless steel in its entirety and hand-polished dual wall tips in addition to its incredible sound make it an easy choice when thinking about a performance exhaust system.

Another undisputable winner, B&B (Billy Boat) produces a variety of exhaust systems for your Ford, whether it be a Crew Cab, Super Cab, F-150, Expedition or the Mustang. You can be assured of top quality and performance with a B&B exhaust since they are manufactured using the highest yet most practicable quality stainless steel and are engineered to exact specifications when mandrel bent so that you will have undisturbed air flow.

^

LM Performance Shopper Approved Reviews