Ford Expedition Belltech

x RESET VEHICLE

  • Belltech
  • It all began with an ideal and that ideal was to design the ultimate in performing lowering suspensions for the Chevrolet Pickup. One that would correct the then existing problems inherent in the available lowering suspension systems and that was the custom of replacing the existing springs or even worse cutting them in order to lower the suspension. So in1983 a small company Belltech was born in order to create a lowering suspension system that would resolve the poor ride caused by these methods. The design team at Belltech felt they could surely resolve this by building a spindle whereby the wheels were higher but the remaining front end system stayed the same and that's exactly what they did with the design of the drop spindle.

    The development of the drop spindle led to the realization that other parts of the truck suspension needed to be changed and as a consequence Shackle Hanger kits, Lowered Coil Springs and Flip kits were designed and offered to the Belltech custo...Read More

<< FIRST < PREV

Page: 1 of 33

  • Ford Expedition Belltech
  • SELECT CATEGORY
  • All Categories
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 33

Belltech

About Belltech

It all began with an ideal and that ideal was to design the ultimate in performing lowering suspensions for the Chevrolet Pickup. One that would correct the then existing problems inherent in the available lowering suspension systems and that was the custom of replacing the existing springs or even worse cutting them in order to lower the suspension. So in1983 a small company Belltech was born in order to create a lowering suspension system that would resolve the poor ride caused by these methods. The design team at Belltech felt they could surely resolve this by building a spindle whereby the wheels were higher but the remaining front end system stayed the same and that&apos;s exactly what they did with the design of the drop spindle.

The development of the drop spindle led to the realization that other parts of the truck suspension needed to be changed and as a consequence Shackle Hanger kits, Lowered Coil Springs and Flip kits were designed and offered to the Belltech customer. And of course only primo materials and first rate designs were used in developing the above products thus the reason for the ensuing success of Belltech,

The improvement in lowering suspensions on the Chevrolet Truck did not go unrecognized by other truck owners and as a consequence Belltech set to work designing and creating suspensions for Ford, Dodge and import trucks. As a result products like the complete lowering kits were developed so that they not only give you an impressive look but also will afford you the alignment, performance and safety necessary for proper lowering and it all comes in one box with all the necessary parts.

And the company’s growth did not stop there but rather the team at Belltech recognized that there was a definite need for a suspension dampening system because as a result of changing the ride height shock geometry was affected, Hence the entry of the Nitro Drop Shock line and the impressive Nitro Active shock line that used monotube technology for an improvement in ride quality. And for the everyday driver Belltech designed the Nitro Drop 2 shock line that gives the driver and passengers a comfortable ride with improved road feel and grip and the Belltech Street Performance Shocks are designed as a performance replacement.

Success and product demand meant Belltech needed to move to a larger manufacturing facility with a satellite warehouse and then to its current 75,000+ sq. ft facility in Clovis, California. The Engineering and Research and Development that this new large facility was able to house resulted in the creation of new products such as products for the GM Silverado and Colorado/ GMC Sierra and Canyon/ and the Ford F150. It enabled them to produce products like the Belltech Trail Performance line of shocks that give you that overall responsiveness and handling needed for your off road experiences.

Shop the complete product line of Belltech products for your truck or SUV and you will be rewarded with products that are superior in every way.

Ford

These are some of the items you can find at LMPerformance for your Ford

The Ford Motor Company, founded by Henry Ford on June 16, 1903 and based in Dearborn, Michigan, is an American automaker and the world's fifth largest automaker based on worldwide vehicle sales. It is one of the most profitable companies in the world, as well as being one of the few to survive the Great Depression and it is the largest family-controlled company in the world, having been in continuous family control for over 110 years. Ford now encompasses two brands: Ford and Lincoln. Late Model Performance can provide parts for 54 models of these American icons whether for street use, racing or off-road the answer to your quest is here.

The quintessential Mustang is well represented at Late Model Performance with a capacious array of parts for chassis and suspension, drive train and transmission, electronics and tuners, interior and exterior accessories, engine components, exhausts, gauges, lighting and induction parts. With body kits from Street Scene, 3dCarbon, RK Sport, Xenon, DURAFLEX, Couture, Carbon Creations the proud Mustang owner has a wide array of types of kits to choose from. The first thing you need to do is decide on the type of material whether fiberglass, polyurethane, ABS plastic, carbon fiber and composite. Polyurethane parts, like the ones manufactured by 3dCarbon, Xenon, Couture and RK Sport, are heavier than fiberglass, not necessarily ideal for racing if weight reduction is the main objective; plus, specialized preparation is required for paint to adhere correctly and it is susceptible to warping under extreme heat. It is; however, extremely flexible, virtually unbreakable and resistant to abrasion and temperature, oil, gasoline and other solvents. Carbon fiber parts, like the one available from the renowned manufacturer Carbon Creations, are ideal for racing because of their extreme strength and light weight; plus, they come clear-coated and don't need to be painted. The significant downside to carbon fiber is its higher cost of production resulting in a more expensive product. The composite creation by Extreme Dimensions, DURAFLEX, is an excellent choice because it is a unique blend of flex resins, fiberglass and plastic that is much stronger than fiberglass and has maximum flexibility; and additionally, it comes with a black primer finish for ease of painting.

Bumping up the horsepower on your Mustang just makes sense and Late Model Performance can help you do that with PYPES’ Exhaust systems, one of the paramount manufacturers of exhaust systems on the market for price and superior quality. PYPES' Mustang exhaust products are made of stainless steel materials for quality and durability and PYPES crossover pipes include dual 409 stainless reinforcement plates at the welds where they are needed most and all pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. With the conjunctive Crossover design it is not unusual to see an increase of anywhere between fifteen and twenty-five HP. A straight path is afforded by the Open Port Exhaust when it is uncapped; however, but you still benefits from the crossover technology and can expect between ten to fifteen HP. An options that is available on this system is the PYPES PYPE Bomb which utilizes a unique louvered core resonated dual wall 304 stainless tip to give you that American Muscle Car sound but not that popping associated with other lesser kits.

The Loudmouth Exhaust by SLP Performance has transformed many cars like the CAMARO SS into modern muscle machines and you can do that too for your Ford car whether it is a CAMARO or not. The exceptional properties; such as exceptional flow characteristics, lighter weight, ease of installation, stainless steel in its entirety and hand-polished dual wall tips in addition to its incredible sound make it an easy choice when thinking about a performance exhaust system.

Another undisputable winner, B&B (Billy Boat) produces a variety of exhaust systems for your Ford, whether it be a Crew Cab, Super Cab, F-150, Expedition or the Mustang. You can be assured of top quality and performance with a B&B exhaust since they are manufactured using the highest yet most practicable quality stainless steel and are engineered to exact specifications when mandrel bent so that you will have undisturbed air flow.