Dodge Charger Belltech

x RESET VEHICLE

  • Belltech
  • It all began with an ideal and that ideal was to design the ultimate in performing lowering suspensions for the Chevrolet Pickup. One that would correct the then existing problems inherent in the available lowering suspension systems and that was the custom of replacing the existing springs or even worse cutting them in order to lower the suspension. So in1983 a small company Belltech was born in order to create a lowering suspension system that would resolve the poor ride caused by these methods. The design team at Belltech felt they could surely resolve this by building a spindle whereby the wheels were higher but the remaining front end system stayed the same and that's exactly what they did with the design of the drop spindle.

    The development of the drop spindle led to the realization that other parts of the truck suspension needed to be changed and as a consequence Shackle Hanger kits, Lowered Coil Springs and Flip kits were designed and offered to the Belltech custo...Read More

<< FIRST < PREV

Page: 1 of 33

  • Dodge Charger Belltech
  • SELECT CATEGORY
  • All Categories
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 33

Belltech

About Belltech

It all began with an ideal and that ideal was to design the ultimate in performing lowering suspensions for the Chevrolet Pickup. One that would correct the then existing problems inherent in the available lowering suspension systems and that was the custom of replacing the existing springs or even worse cutting them in order to lower the suspension. So in1983 a small company Belltech was born in order to create a lowering suspension system that would resolve the poor ride caused by these methods. The design team at Belltech felt they could surely resolve this by building a spindle whereby the wheels were higher but the remaining front end system stayed the same and that&apos;s exactly what they did with the design of the drop spindle.

The development of the drop spindle led to the realization that other parts of the truck suspension needed to be changed and as a consequence Shackle Hanger kits, Lowered Coil Springs and Flip kits were designed and offered to the Belltech customer. And of course only primo materials and first rate designs were used in developing the above products thus the reason for the ensuing success of Belltech,

The improvement in lowering suspensions on the Chevrolet Truck did not go unrecognized by other truck owners and as a consequence Belltech set to work designing and creating suspensions for Ford, Dodge and import trucks. As a result products like the complete lowering kits were developed so that they not only give you an impressive look but also will afford you the alignment, performance and safety necessary for proper lowering and it all comes in one box with all the necessary parts.

And the company’s growth did not stop there but rather the team at Belltech recognized that there was a definite need for a suspension dampening system because as a result of changing the ride height shock geometry was affected, Hence the entry of the Nitro Drop Shock line and the impressive Nitro Active shock line that used monotube technology for an improvement in ride quality. And for the everyday driver Belltech designed the Nitro Drop 2 shock line that gives the driver and passengers a comfortable ride with improved road feel and grip and the Belltech Street Performance Shocks are designed as a performance replacement.

Success and product demand meant Belltech needed to move to a larger manufacturing facility with a satellite warehouse and then to its current 75,000+ sq. ft facility in Clovis, California. The Engineering and Research and Development that this new large facility was able to house resulted in the creation of new products such as products for the GM Silverado and Colorado/ GMC Sierra and Canyon/ and the Ford F150. It enabled them to produce products like the Belltech Trail Performance line of shocks that give you that overall responsiveness and handling needed for your off road experiences.

Shop the complete product line of Belltech products for your truck or SUV and you will be rewarded with products that are superior in every way.

Dodge

These are some of the items you can find at LMPerformance for your Dodge

The Dodge Charger Hellcat Look Hood is now available from DURAFLEX to give your car that extreme performance look without sacrificing quality because it is manufactured with six ounce fiberglass composed of fiberglass, plastic and resins for the ultimate in durability. Rear bumper covers for your Ram to Viper from DURAFLEX are designed to fit your car exactly and come with a black primer finish. hardware kit and instructions for installation making it easy to replace your damaged or worn bumper. In order to help keep the nose of your Avenger, Challenger, Dakota, Dart, Durango or Magnum down so that you reduce under-steer install a Front Lip Under Spoiler Air Dam from DURAFLEX with the same inimitable quality as all the DURAFLEX products. To reduce drag and increase fuel efficiency in your Stealth, Charger, Avenger, Dart and Magnum consider installing a Rear Lip Under Spoiler Air Dam that can help lessen the lift on your car by "spoiling" the airflow and install Rear Wings that provide a down force on your Challenger, Charger, Ram Truck or Stealth for faster cornering and more stability. If you are trying to reduce the down force that occurs when the side air rushes in to your car's underbody, then side skits by DURAFLEX are the answer because they serve to block the air and thus improve down force levels. For styling, covering large tires, hiding rust or body damage around the wheel well or replacing damaged fender flares on your Dodge Challenger then take a look at the DURAFLEX Fender Flares with hand laid six-ounce fiberglass and black finish.

The first Dodge that came off the assembly line was in 1914 and was a five-passenger touring car with a wheelbase of 110 inches and came equipped with a 25 H.P. four cylinder "L" head engine with a 3 7/8 inch bore and a 4 1/2-inch stroke, a cone clutch, and a pressurized fuel system - a far cry from the Dodge in your garage. The Dodge owners of today want more for their cars and performance aftermarket parts can fill that need with a variety of parts for both the exterior and interior and motor. From SPYDER AUTO, one of the foremost providers of aftermarket lighting you can choose lighting for everything from your Avenger to your SPYDER: Fog Lights, Projector Headlights, Halogen Headlights, Projector Fog Lights, LED Fog Lights, LED Tail Lights that are compliant with all federal regulations and are ISO-9000 certified and ISO-9002 certified. Modernize your Dodge Ram with projector headlights that come with singular LED Halos and with LED TAIL lights that are sure to be visible on the road and as an aesthetic addition anytime.

Filtering airborne contaminants so they don't get into your Dodge engine is a big job and over time the air filter can get clogged and can result in a loss in performance, lower fuel economy, misfiring, missing engine or unusual engine sounds. With a K & N performance air filter you will never have to replace your Dodge Air Filter again because it is washable and reusable and can last up to 50,000 miles before you will have to clean it and is also excellent for filtration and air flow and has a Million Mile Warranty An even better solution to increase air flow in everything from your Dodge Avenger to Viper are Cold-Air Kits by K & N because their design helps to multiply air flow making your engine more powerful. The K & N intakes do the job of lessening the restrictions that appear in factory parts and forming a smooth and straight air flow. The K&N High Performance Oil Filter for your Dodge Challenger is designed for heavy use with less risk of damage in situations such as in racing, rally or off-road use and is stronger than the average filter because it is built with thicker walls and has a safety wire attachment plus has a resin permeated cellulose filter medium allowing increased rate of flow.

The CORSA Exhaust Systems for your Dodge Avenger, Challenger, Charger, MAGNUMM, Ram Truck and Viper are a big improvement over your factory exhaust system because they create a less restrictive airway to expel exhaust gases and result in more power. Another reason for choosing the CORSA is the stupendous selection of sound levels available from the Touring Exhaust, the softest sounding system to the XTREME, the most aggressive sounding system and the absence of drone that is so annoying. Additionally, there is no restriction in the design of the system and as a result you will see an improvement in horsepower and engine revolution. CORSA has a variety of exhaust systems available for your car.

The KONI Sprinter Heavy Track Red Shock are the consummate shock absorber for your Dodge Sprinter because they were specifically designed for the SUV or 4X4 and are up-sized for safer handling on the road and in hazardous conditions and can be adjusted off your Dodge. For your Dodge Neon and Avenger the KONI Sport or Street shocks are worth your consideration with the Sport being the best for lowering springs and on some cars are adjustable externally and with the Street being the entry level performance shock that are non-adjustable. The Classic Shocks for your early year Dodge Coronet, Charger and Challenger give your classic car a modern feel and result in better handling and a safer ride on the road and are off-the-car adjustable. The Dodge Charger and Challenger Street T Kit comes with Street Shocks and custom-made lowering springs that are ideally balanced for your individual ride and to avoid pitch and roll.