Dodge Challenger Anderson Composites Exterior Styling Rocker Panels

<< FIRST < PREV ...   NEXT > LAST >>
  • Dodge Challenger Anderson Composites Exterior Styling Rocker Panels
  • SELECT CATEGORY
  • Anderson Composites PRODUCT LINE(S)
  • SELECT BRAND
  • Dodge Challenger Anderson Composites Exterior Styling Rocker Panels
SORT BY:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Anderson Composites

Anderson Composites

About Anderson Composites

Anderson Composites specializes in fiberglass and carbon fiber components for late-model domestic makes and models. The company manufactures custom carbon fiber auto parts for each of their products with the utmost attention to detail; they use top-grade materials for a quality product you can trust. Extensive manufacturing experience allows AC to construct everything from hoods, trunk lids, spoilers, side rockers, lip kits, to more complex pieces like doors in both fiberglass and carbon fiber.

Anderson Composites

Anderson Composites, the domestic arm of well-known sport compact composite manufacturer Seibon Carbon, is able to create this comprehensive catalog of parts, then provide the manufacturing expertise to provide precision-crafted carbon-fiber and fiberglass components.

The company provides impeccable attention to detail, which is critical to maintaining quality when building lightweight body parts that have intricate shapes and sizes. Their research and development team invests the time and effort to produce a part that is beautiful and functional.

Anderson Composites’ research and development team understands that the foundation for performance starts with how a product is made. They take pride in innovative and cutting-edge production processes that make the possibilities endless. Precision and attention to detail Anderson Composites uses to make its products is a science of its own their craftsmanship is simply unmatched.

The Carbon Fiber hoods by Anderson Composites are another choice for your Mustang, Camaro, Corvette, Challenger, Viper, Wrangler, Trans Am ad Ram. Carbon fiber hoods can be as little as one-fifth the weight of your original steel hood and result in better acceleration, stopping and turning and become more fuel efficient and if you are a racing enthusiast you know how important those things are. Or customize your Corvette C7 with a Carbon Fiber hood vent from Anderson Composites and give it an eye-catching look and in addition increase your car’s performance when you release the hot air that carries less oxygen and causes a reduction in your engine’s power. Give your Dodge Challenger that aerodynamic race car look with carbon fiber front chin spoilers and rear spoilers from Anderson Composites and increase your Challenger’s grip on the road and have a car that sticks better the faster it goes. And if you are a Jeep Wrangler owner consider the Anderson Composites carbon fiber hood and front grill for aesthetic appeal and lighter weight for improved performance.

If you have ever laid fiberglass you know how difficult it is and in order to get a pristine look it must be done properly and Anderson Composites knows just how to handle the cloth and materials so that they can complete even the most intricate job expertly. Because fiberglass is a product that has a long life expectancy it is a perfect solution if you have problems with environmental extremes since it stands up to these. A perusal of the LMPERFORMANCE web site will introduce you to the potpourri of aftermarket aerodynamic additions available in this material from Anderson Composites, parts like hoods, front upper grilles, front bumpers and rocker panels or rear spoilers for your Mustang, or rear diffusers to help ease the high velocity that occurs under your car, reducing drag and increasing the downforce.

Anderson Composites FAQS

  • Do I need to have a professional install my carbon fiber components? We highly recommend a professional that is experienced with fiberglass and carbon fiber components perform installation for a quality fit.
  • Can I paint over carbon fiber? Yes, you may paint over our carbon fiber components provided the surface is prepped correctly - free of dirt and grease etc. Consult with a professional painter for recommendations.
  • Can I add a protective film to carbon fiber? Yes, you can add protective films to our carbon fiber components to help protect against abrasion and road wear. Consult with manufacturer or installer for recommendations.
  • Can I add a custom wrap to my carbon fiber? Yes, you can have wrap material installed on your carbon fiber, however, too much heat used for installation or removal can damage the resin surface. Consult a professional installer for recommendations.
  • Can I add ceramic coating to the carbon fiber? Yes, you can add ceramic coating to our carbon fiber components to help protect the surface from abrasion and enhance the high luster, show-quality finish. Consult with manufacturer or installer for recommendations.
  • Do I need to install hood pins? Yes. All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins.
  • Do I need to remove OEM hood struts when installing a composite hood? Yes. We always recommend the factory hood struts be removed when installing a composite hood. Factory struts are rated for a heavier hood.
  • Do I need to use a heat shield when installing a composite hood? Yes. Anderson Composites requires the use of heat shields for all carbon fiber and fiberglass hoods. Heat shields help avoid pre-mature aging of the product. We offer heat shields on our website.
  • What is colored carbon fiber? Color tinted "carbon fiber" fabric is made with Kevlar. Anderson Composites carbon fiber fabric is woven with 3k 2x2, 100% carbon fiber, resulting with a black and grey appearance. We do not offer color tinted carbon fiber components.
  • Do you have hood, decklid and rocker installation videos for reference? Yes. Please visit our YouTube channel to view applicable videos for hoods, decklids, rocker panels, spoilers and fenders.
  • Do I inspect the product upon delivery? Yes. Do not let the delivery person leave without your full product inspection. You have 24 hours to make a claim against the shipping company if the product is damaged. Buyer must inspect the packaging and the products carefully upon receiving them, even if the carton appears to be okay. Then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier’s damage inspector to inspect. A signed receipt without any notation indemnified the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.
  • All damages must be notified to carrier and the dealer within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Anderson Composites, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.
  • Cracks have appeared on my composite part, is this covered by any warranty? Cracks are caused by an outside force and not a result of the material we use or our manufacturing process. Common causes are slamming or dropping the hood, decklid or doors, re-installing gas shocks/dampers/struts on hoods and decklids or not installing a heat shield on the hood. Composite products will not sustain heavy force or weight, for they could be cracked by such force or weight.
  • I just received my carbon fiber part, do I need to clear coat it before installation? No additional clear coat is required. Our carbon fiber parts are manufactured by spraying a coat of marine grade resin with UV inhibitors on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat with UV inhibitors applied and polished to protect the surface and increase the high luster finish.

Dodge

These are some of the items you can find at LMPerformance for your Dodge

The Dodge Charger Hellcat Look Hood is now available from DURAFLEX to give your car that extreme performance look without sacrificing quality because it is manufactured with six ounce fiberglass composed of fiberglass, plastic and resins for the ultimate in durability. Rear bumper covers for your Ram to Viper from DURAFLEX are designed to fit your car exactly and come with a black primer finish. hardware kit and instructions for installation making it easy to replace your damaged or worn bumper. In order to help keep the nose of your Avenger, Challenger, Dakota, Dart, Durango or Magnum down so that you reduce under-steer install a Front Lip Under Spoiler Air Dam from DURAFLEX with the same inimitable quality as all the DURAFLEX products. To reduce drag and increase fuel efficiency in your Stealth, Charger, Avenger, Dart and Magnum consider installing a Rear Lip Under Spoiler Air Dam that can help lessen the lift on your car by "spoiling" the airflow and install Rear Wings that provide a down force on your Challenger, Charger, Ram Truck or Stealth for faster cornering and more stability. If you are trying to reduce the down force that occurs when the side air rushes in to your car's underbody, then side skits by DURAFLEX are the answer because they serve to block the air and thus improve down force levels. For styling, covering large tires, hiding rust or body damage around the wheel well or replacing damaged fender flares on your Dodge Challenger then take a look at the DURAFLEX Fender Flares with hand laid six-ounce fiberglass and black finish.

The first Dodge that came off the assembly line was in 1914 and was a five-passenger touring car with a wheelbase of 110 inches and came equipped with a 25 H.P. four cylinder "L" head engine with a 3 7/8 inch bore and a 4 1/2-inch stroke, a cone clutch, and a pressurized fuel system - a far cry from the Dodge in your garage. The Dodge owners of today want more for their cars and performance aftermarket parts can fill that need with a variety of parts for both the exterior and interior and motor. From SPYDER AUTO, one of the foremost providers of aftermarket lighting you can choose lighting for everything from your Avenger to your SPYDER: Fog Lights, Projector Headlights, Halogen Headlights, Projector Fog Lights, LED Fog Lights, LED Tail Lights that are compliant with all federal regulations and are ISO-9000 certified and ISO-9002 certified. Modernize your Dodge Ram with projector headlights that come with singular LED Halos and with LED TAIL lights that are sure to be visible on the road and as an aesthetic addition anytime.

Filtering airborne contaminants so they don't get into your Dodge engine is a big job and over time the air filter can get clogged and can result in a loss in performance, lower fuel economy, misfiring, missing engine or unusual engine sounds. With a K & N performance air filter you will never have to replace your Dodge Air Filter again because it is washable and reusable and can last up to 50,000 miles before you will have to clean it and is also excellent for filtration and air flow and has a Million Mile Warranty An even better solution to increase air flow in everything from your Dodge Avenger to Viper are Cold-Air Kits by K & N because their design helps to multiply air flow making your engine more powerful. The K & N intakes do the job of lessening the restrictions that appear in factory parts and forming a smooth and straight air flow. The K&N High Performance Oil Filter for your Dodge Challenger is designed for heavy use with less risk of damage in situations such as in racing, rally or off-road use and is stronger than the average filter because it is built with thicker walls and has a safety wire attachment plus has a resin permeated cellulose filter medium allowing increased rate of flow.

The CORSA Exhaust Systems for your Dodge Avenger, Challenger, Charger, MAGNUMM, Ram Truck and Viper are a big improvement over your factory exhaust system because they create a less restrictive airway to expel exhaust gases and result in more power. Another reason for choosing the CORSA is the stupendous selection of sound levels available from the Touring Exhaust, the softest sounding system to the XTREME, the most aggressive sounding system and the absence of drone that is so annoying. Additionally, there is no restriction in the design of the system and as a result you will see an improvement in horsepower and engine revolution. CORSA has a variety of exhaust systems available for your car.

The KONI Sprinter Heavy Track Red Shock are the consummate shock absorber for your Dodge Sprinter because they were specifically designed for the SUV or 4X4 and are up-sized for safer handling on the road and in hazardous conditions and can be adjusted off your Dodge. For your Dodge Neon and Avenger the KONI Sport or Street shocks are worth your consideration with the Sport being the best for lowering springs and on some cars are adjustable externally and with the Street being the entry level performance shock that are non-adjustable. The Classic Shocks for your early year Dodge Coronet, Charger and Challenger give your classic car a modern feel and result in better handling and a safer ride on the road and are off-the-car adjustable. The Dodge Charger and Challenger Street T Kit comes with Street Shocks and custom-made lowering springs that are ideally balanced for your individual ride and to avoid pitch and roll.

^

LM Performance Shopper Approved Reviews