Dodge Caravan K&N Engineering Air Filters - Drop In

x RESET VEHICLE

  • K&N Engineering

  • Shop our extensive catalog of Cold Air Intakes and Air Filters.

    K&N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

    GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

    GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

    Product lines include: K&N Fuel Injection Kits, FIPK, K&N 77 Series High Flow Air Intakes, K&N Typhoon Air Intake Systems, K&N AirCharger, K&N 57i Air Induction Kits, K&N Cold Air Intake Filters, and Stock Replacement Air Filters.

    Back as far as 1969 K&N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K & N products can be found in more than thirty countries around the world. There is a reason K & N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

    If you need more power, consider the gains that can be achieved by installing a K&N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K & N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K & N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

<< FIRST < PREV

Page: 1 of 21

  • Dodge Caravan K&N Engineering Air Filters - Drop In
  • SELECT CATEGORY
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 21

K&N Engineering

About K&N Engineering

Shop our extensive catalog of Cold Air Intakes and Air Filters.

K&amp;N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

Product lines include: K&amp;N Fuel Injection Kits, FIPK, K&amp;N 77 Series High Flow Air Intakes, K&amp;N Typhoon Air Intake Systems, K&amp;N AirCharger, K&amp;N 57i Air Induction Kits, K&amp;N Cold Air Intake Filters, and Stock Replacement Air Filters.

Back as far as 1969 K&amp;N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&amp;N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K &amp; N products can be found in more than thirty countries around the world. There is a reason K &amp; N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

If you need more power, consider the gains that can be achieved by installing a K&amp;N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&amp;N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K &amp; N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K &amp; N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

Dodge

These are some of the items you can find at LMPerformance for your Dodge

The Dodge Charger Hellcat Look Hood is now available from DURAFLEX to give your car that extreme performance look without sacrificing quality because it is manufactured with six ounce fiberglass composed of fiberglass, plastic and resins for the ultimate in durability. Rear bumper covers for your Ram to Viper from DURAFLEX are designed to fit your car exactly and come with a black primer finish. hardware kit and instructions for installation making it easy to replace your damaged or worn bumper. In order to help keep the nose of your Avenger, Challenger, Dakota, Dart, Durango or Magnum down so that you reduce under-steer install a Front Lip Under Spoiler Air Dam from DURAFLEX with the same inimitable quality as all the DURAFLEX products. To reduce drag and increase fuel efficiency in your Stealth, Charger, Avenger, Dart and Magnum consider installing a Rear Lip Under Spoiler Air Dam that can help lessen the lift on your car by "spoiling" the airflow and install Rear Wings that provide a down force on your Challenger, Charger, Ram Truck or Stealth for faster cornering and more stability. If you are trying to reduce the down force that occurs when the side air rushes in to your car's underbody, then side skits by DURAFLEX are the answer because they serve to block the air and thus improve down force levels. For styling, covering large tires, hiding rust or body damage around the wheel well or replacing damaged fender flares on your Dodge Challenger then take a look at the DURAFLEX Fender Flares with hand laid six-ounce fiberglass and black finish.

The first Dodge that came off the assembly line was in 1914 and was a five-passenger touring car with a wheelbase of 110 inches and came equipped with a 25 H.P. four cylinder "L" head engine with a 3 7/8 inch bore and a 4 1/2-inch stroke, a cone clutch, and a pressurized fuel system - a far cry from the Dodge in your garage. The Dodge owners of today want more for their cars and performance aftermarket parts can fill that need with a variety of parts for both the exterior and interior and motor. From SPYDER AUTO, one of the foremost providers of aftermarket lighting you can choose lighting for everything from your Avenger to your SPYDER: Fog Lights, Projector Headlights, Halogen Headlights, Projector Fog Lights, LED Fog Lights, LED Tail Lights that are compliant with all federal regulations and are ISO-9000 certified and ISO-9002 certified. Modernize your Dodge Ram with projector headlights that come with singular LED Halos and with LED TAIL lights that are sure to be visible on the road and as an aesthetic addition anytime.

Filtering airborne contaminants so they don't get into your Dodge engine is a big job and over time the air filter can get clogged and can result in a loss in performance, lower fuel economy, misfiring, missing engine or unusual engine sounds. With a K & N performance air filter you will never have to replace your Dodge Air Filter again because it is washable and reusable and can last up to 50,000 miles before you will have to clean it and is also excellent for filtration and air flow and has a Million Mile Warranty An even better solution to increase air flow in everything from your Dodge Avenger to Viper are Cold-Air Kits by K & N because their design helps to multiply air flow making your engine more powerful. The K & N intakes do the job of lessening the restrictions that appear in factory parts and forming a smooth and straight air flow. The K&N High Performance Oil Filter for your Dodge Challenger is designed for heavy use with less risk of damage in situations such as in racing, rally or off-road use and is stronger than the average filter because it is built with thicker walls and has a safety wire attachment plus has a resin permeated cellulose filter medium allowing increased rate of flow.

The CORSA Exhaust Systems for your Dodge Avenger, Challenger, Charger, MAGNUMM, Ram Truck and Viper are a big improvement over your factory exhaust system because they create a less restrictive airway to expel exhaust gases and result in more power. Another reason for choosing the CORSA is the stupendous selection of sound levels available from the Touring Exhaust, the softest sounding system to the XTREME, the most aggressive sounding system and the absence of drone that is so annoying. Additionally, there is no restriction in the design of the system and as a result you will see an improvement in horsepower and engine revolution. CORSA has a variety of exhaust systems available for your car.

The KONI Sprinter Heavy Track Red Shock are the consummate shock absorber for your Dodge Sprinter because they were specifically designed for the SUV or 4X4 and are up-sized for safer handling on the road and in hazardous conditions and can be adjusted off your Dodge. For your Dodge Neon and Avenger the KONI Sport or Street shocks are worth your consideration with the Sport being the best for lowering springs and on some cars are adjustable externally and with the Street being the entry level performance shock that are non-adjustable. The Classic Shocks for your early year Dodge Coronet, Charger and Challenger give your classic car a modern feel and result in better handling and a safer ride on the road and are off-the-car adjustable. The Dodge Charger and Challenger Street T Kit comes with Street Shocks and custom-made lowering springs that are ideally balanced for your individual ride and to avoid pitch and roll.

^