Chevrolet Avalanche K&N Engineering Air Filters - Drop In

x RESET VEHICLE

  • K&N Engineering

  • Shop our extensive catalog of Cold Air Intakes and Air Filters.

    K&N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

    GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

    GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

    Product lines include: K&N Fuel Injection Kits, FIPK, K&N 77 Series High Flow Air Intakes, K&N Typhoon Air Intake Systems, K&N AirCharger, K&N 57i Air Induction Kits, K&N Cold Air Intake Filters, and Stock Replacement Air Filters.

    Back as far as 1969 K&N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K & N products can be found in more than thirty countries around the world. There is a reason K & N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

    If you need more power, consider the gains that can be achieved by installing a K&N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K & N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K & N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

<< FIRST < PREV

Page: 1 of 21

  • Chevrolet Avalanche K&N Engineering Air Filters - Drop In
  • SELECT CATEGORY
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 21

K&N Engineering

About K&N Engineering

Shop our extensive catalog of Cold Air Intakes and Air Filters.

K&amp;N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

Product lines include: K&amp;N Fuel Injection Kits, FIPK, K&amp;N 77 Series High Flow Air Intakes, K&amp;N Typhoon Air Intake Systems, K&amp;N AirCharger, K&amp;N 57i Air Induction Kits, K&amp;N Cold Air Intake Filters, and Stock Replacement Air Filters.

Back as far as 1969 K&amp;N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&amp;N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K &amp; N products can be found in more than thirty countries around the world. There is a reason K &amp; N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

If you need more power, consider the gains that can be achieved by installing a K&amp;N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&amp;N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K &amp; N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K &amp; N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

Chevrolet

These are some of the items you can find at LMPerformance for your Chevrolet

The Chevrolet company founded in 1911 by a Swiss race car driver and automotive engineer, has gone on to produce some of the celebrated icons in the automobile industry with names like the Corvette and CAMARO, much coveted by collectors and racing enthusiasts. The team at LMPerformance can help you find the consummate part for the repair or improvement of your Chevrolet with aftermarket performance add-ons. The owner having been the proud owner of CAMAROS for many years knows the car well and ergo has been able to assemble just the right parts for your CAMARO and other model Chevrolets. LMPerformance has an extensive inventory of top quality parts from the leading craftsmen in the industry, names such as EIBACH, Ram, Spec, SLP to name just a few and a brief scan of the parts list will acquaint you with just the part to meet your needs.

For performance aftermarket parts they don't get any better than SLP Performance, the noteworthy manufacturer of a wide range of performance enhancements that have aided in the transformation of late-model cars into modern muscle machines, cars like the CAMARO SS. The famous "loudmouth" exhaust systems for your CAMARO and Cobalt SS include the LOUDMOUTH resonator with almost no flow restriction and outstanding sound. The Dual Tip Tailpipe Assembly for your AVALANCE, Tahoe, Suburban, Yukon, Yukon XL that replaces your stock tip has low muscle tone and is easy to install and gives your truck a completely new individualized look. The POWERFLO Exhaust System for your CAMARO, Cobalt SS, and Trailblazer includes a pair of POWERFLO mufflers for a rich performance sound and can be installed in under 30 minutes. To solve the problem of the restrictive air box in your CAMARO install the SLP Performance Air Box Lid to eliminate the restrictive baffles at the rear of your stock lid and see the difference it makes in your horsepower. Also for your CAMARO, the SLP Axle Half-Shafts Extreme Duty that eliminate wheel hop at launch because they use different diameter chrome axle bars on each side. The SLP CAMARO V-8 Front Brake Package comes with 6-piston calipers and two-piece 15 rotors for increased thermal capacity, pad area that provides more effective out-gassing, all resulting in improved braking efficiency and reduced fade. Peruse the LMPERFORMANCE web site for the propitious section of SLP parts for your brand Chevrolet.

The prestigious KOOKS brand of Exhaust Systems is another choice for your CAMARO, Corvette, Silverado, Tahoe, SSR, Trailblazer and Trailblazer SS aftermarket performance exhaust needs whether it be a GREEN CATTED, OFF-ROAD, CATTED or AXLE BACK and with X and y Pipes. The KOOKS reputation is indisputably first-rate in the aftermarket performance industry because they are handcrafted in the USA using the highest quality products for the best performance and they are EPA legal in 49 states.

For your CAMARO, Corvette, Silverado, CHEVETTE, Nova, Monte Carlo, SSR and Trailblazer SS try the noteworthy AMERICAN RACING HEADERS brand of Exhaust Systems, Down Pipes, Tips, Headers, Short Headers, Mid Pipes engineered with 304 Stainless Steel and with 3/8-inch stainless steel flanges. Or better yet consider a Full Exhaust and Header System for your Chevy CAMARO or Chevy SS in a variety of configurations, with or without cats, off-road, whatever your desire, and constructed with the pristine quality you expect from American Racing Headers. At American Racing Headers primary tubes are engineered to individual engine output affording the least amount of compromise in the engine bay affording the greatest horsepower gain.

Another possibility for your exhaust needs is the B&B BILLY BOAT brand with over 25 years’ experience designing and manufacturing premier exhaust components. Let Billy Boat help you free your CAMARO, Corvette, Impala SS, Silverado, Suburban and Tahoe engine's power by installing a complete exhaust system with T-304 Stainless Steel, mandrel bending and mufflers developed in-house giving you unparalleled performance and sound. Install a Cold-Air Kits to help your Corvette breathe better so that your engine performs the way you want it to. Performance headers on your CAMARO and Corvette with give you that polished eye catching look you want for your prized possession. Scrutinize all the exhaust parts by Billy Boat including various Pipes and Headers to find the aftermarket performance part that best suits your needs and get the best.

Still want more opportunities then take a look at the preponderance of exhaust parts available from the renowned manufacturer, PYPES, for everything from CAMARO to the Silverado, including complete Exhaust Systems, Headers, Pipes and Tips. With three different mufflers, the Violator, the Street Pro, and the Race Pro offered you can decide if you want the loudest sound or the quietest and with the X-change X-pipes you can conveniently add electric cutouts to your X-Pipes.

Want Mid-Pipes for your CAMARO or Corvette then scrutinize the information available on the Stainless Works brand of pipes to learn why they will never red-rust like cheaper brands. And for your CAMARO owners, the CAMARO Convertible Conversion Kit for 6.2L. 2011+ CAMARO V8 can adapt the clearance around the convertible frame bracing to allow you to use Stainless Works 3" dual exhausts. For Headers or Complete Exhaust Systems for everything from CAMARO to Trailblazer SS examine the parts available on our web site to make you engine perform the way it should and look the way you want.

^