866.567.2001 8am-5pm M-F Central

Chevrolet Nitrous Express

<< FIRST < PREV ...   NEXT > LAST >>
  • Chevrolet Nitrous Express
<< FIRST < PREV ...   NEXT > LAST >>
Nitrous Express

Nitrous Express

About Nitrous Express

The founders of Nitrous Express didn’t want to “build a better mousetrap” but they did want to create a primo nitrous system unlike any on the market so in 1996 they set about doing just that. They were able to accomplish this because of their ability to manufacture their components with the hot rod adjustments incorporated into the system. As a consequence Nitrous Express was able to offer a product that could be used “as is” and the company continued on successfully improving their products and increasing their product line.

The elimination of the turbulence points seen in competitive systems was paramount to the team and Nitrous Express and to this end they designed their unique bottle valve. The NX “Lightning” bottle valve, for example, has a solo 45 degree angle to its discharge point thus eliminating the severe 90 degree turn seen in the competitors’ bottle valves. In addition the exclusive bottle nipple designed by Nitrous Express serves to transition nitrous from the valve to the supply hose with no internal steps or restrictions. All of these necessary improvements result in more horsepower per pound of nitrous than any of its competitors products.

If you were to inspect the Nitrous Express 500 bottle valves you would see a direct flow path that results in the elimination of gaseous bubbles that can cause a decrease in horsepower and the Nitrous 500 can be used on systems up to 2000 nitrous horsepower. The success of the Nitrous Express 500 bottle is attributed to the fact that it has a .625” siphon tube and a solo 45 degree turn and fittings that can be used with an 10AN supply line restriction free.

Because the Nitrous Express 500 is free of blockages, sharp edges and tight turns you can expect a smooth laminar flow of nitrous, minimal boiling and minimal gaseous nitrous in the flow path to the solenoid. All of the aforementioned result in a nitrous system producing more clean horsepower and one that is much more effortless to tune. And add to this the fact that the 500 is CNC machined using billet aluminum and is nearly one half pound lighter that commensurate brass valves, has dual gauge ports and interconvertible nipples allowing for it to be used by a multiplicity of supply lines and you have a sure winner.

Realizing that the solenoids are an important part of the system and need a good flow path, Nitrous Express developed the NX Lightning solenoids with an integrated purge port that permits connection of a purge value to the solenoid. The elimination of trapped air between the fuel pressure regulator and the fuel solenoid was accomplished by a fuel bypass port that permits the connection of a small return line to the tank.

The high-tech Nitrous Express plates are the most premier nitrous plates available and are without spray bars to sag, split, block airflow, or damage and afford the best fit. Maximum horsepower is achieved because the internal CNC machines passages result in primo nitrous/fuel distribution and unrivaled cylinder to cylinder distribution.

Finally in 2018 Nitrous Express added to their product line by acquiring the company that manufactured impressive Water Methanol Injection systems, Snow Performance, and as a consequence can offer their customers the best available nitrous and water methanol products on the market.


These are some of the items you can find at LMPerformance for your Chevrolet

The Chevrolet company founded in 1911 by a Swiss race car driver and automotive engineer, has gone on to produce some of the celebrated icons in the automobile industry with names like the Corvette and CAMARO, much coveted by collectors and racing enthusiasts. The team at LMPerformance can help you find the consummate part for the repair or improvement of your Chevrolet with aftermarket performance add-ons. The owner having been the proud owner of CAMAROS for many years knows the car well and ergo has been able to assemble just the right parts for your CAMARO and other model Chevrolets. LMPerformance has an extensive inventory of top quality parts from the leading craftsmen in the industry, names such as EIBACH, Ram, Spec, SLP to name just a few and a brief scan of the parts list will acquaint you with just the part to meet your needs.

For performance aftermarket parts they don't get any better than SLP Performance, the noteworthy manufacturer of a wide range of performance enhancements that have aided in the transformation of late-model cars into modern muscle machines, cars like the CAMARO SS. The famous "loudmouth" exhaust systems for your CAMARO and Cobalt SS include the LOUDMOUTH resonator with almost no flow restriction and outstanding sound. The Dual Tip Tailpipe Assembly for your AVALANCE, Tahoe, Suburban, Yukon, Yukon XL that replaces your stock tip has low muscle tone and is easy to install and gives your truck a completely new individualized look. The POWERFLO Exhaust System for your CAMARO, Cobalt SS, and Trailblazer includes a pair of POWERFLO mufflers for a rich performance sound and can be installed in under 30 minutes. To solve the problem of the restrictive air box in your CAMARO install the SLP Performance Air Box Lid to eliminate the restrictive baffles at the rear of your stock lid and see the difference it makes in your horsepower. Also for your CAMARO, the SLP Axle Half-Shafts Extreme Duty that eliminate wheel hop at launch because they use different diameter chrome axle bars on each side. The SLP CAMARO V-8 Front Brake Package comes with 6-piston calipers and two-piece 15 rotors for increased thermal capacity, pad area that provides more effective out-gassing, all resulting in improved braking efficiency and reduced fade. Peruse the LMPERFORMANCE web site for the propitious section of SLP parts for your brand Chevrolet.

The prestigious KOOKS brand of Exhaust Systems is another choice for your CAMARO, Corvette, Silverado, Tahoe, SSR, Trailblazer and Trailblazer SS aftermarket performance exhaust needs whether it be a GREEN CATTED, OFF-ROAD, CATTED or AXLE BACK and with X and y Pipes. The KOOKS reputation is indisputably first-rate in the aftermarket performance industry because they are handcrafted in the USA using the highest quality products for the best performance and they are EPA legal in 49 states.

For your CAMARO, Corvette, Silverado, CHEVETTE, Nova, Monte Carlo, SSR and Trailblazer SS try the noteworthy AMERICAN RACING HEADERS brand of Exhaust Systems, Down Pipes, Tips, Headers, Short Headers, Mid Pipes engineered with 304 Stainless Steel and with 3/8-inch stainless steel flanges. Or better yet consider a Full Exhaust and Header System for your Chevy CAMARO or Chevy SS in a variety of configurations, with or without cats, off-road, whatever your desire, and constructed with the pristine quality you expect from American Racing Headers. At American Racing Headers primary tubes are engineered to individual engine output affording the least amount of compromise in the engine bay affording the greatest horsepower gain.

Another possibility for your exhaust needs is the B&B BILLY BOAT brand with over 25 years’ experience designing and manufacturing premier exhaust components. Let Billy Boat help you free your CAMARO, Corvette, Impala SS, Silverado, Suburban and Tahoe engine's power by installing a complete exhaust system with T-304 Stainless Steel, mandrel bending and mufflers developed in-house giving you unparalleled performance and sound. Install a Cold-Air Kits to help your Corvette breathe better so that your engine performs the way you want it to. Performance headers on your CAMARO and Corvette with give you that polished eye catching look you want for your prized possession. Scrutinize all the exhaust parts by Billy Boat including various Pipes and Headers to find the aftermarket performance part that best suits your needs and get the best.

Still want more opportunities then take a look at the preponderance of exhaust parts available from the renowned manufacturer, PYPES, for everything from CAMARO to the Silverado, including complete Exhaust Systems, Headers, Pipes and Tips. With three different mufflers, the Violator, the Street Pro, and the Race Pro offered you can decide if you want the loudest sound or the quietest and with the X-change X-pipes you can conveniently add electric cutouts to your X-Pipes.

Want Mid-Pipes for your CAMARO or Corvette then scrutinize the information available on the Stainless Works brand of pipes to learn why they will never red-rust like cheaper brands. And for your CAMARO owners, the CAMARO Convertible Conversion Kit for 6.2L. 2011+ CAMARO V8 can adapt the clearance around the convertible frame bracing to allow you to use Stainless Works 3" dual exhausts. For Headers or Complete Exhaust Systems for everything from CAMARO to Trailblazer SS examine the parts available on our web site to make you engine perform the way it should and look the way you want.


LM Performance Shopper Approved Reviews