Cadillac CTS K&N Engineering Air Filters - Drop In

x RESET VEHICLE

  • K&N Engineering

  • Shop our extensive catalog of Cold Air Intakes and Air Filters.

    K&N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

    GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

    GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

    Product lines include: K&N Fuel Injection Kits, FIPK, K&N 77 Series High Flow Air Intakes, K&N Typhoon Air Intake Systems, K&N AirCharger, K&N 57i Air Induction Kits, K&N Cold Air Intake Filters, and Stock Replacement Air Filters.

    Back as far as 1969 K&N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K & N products can be found in more than thirty countries around the world. There is a reason K & N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

    If you need more power, consider the gains that can be achieved by installing a K&N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K & N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K & N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

<< FIRST < PREV

Page: 1 of 21

  • Cadillac CTS K&N Engineering Air Filters - Drop In
  • SELECT CATEGORY
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 21

K&N Engineering

About K&N Engineering

Shop our extensive catalog of Cold Air Intakes and Air Filters.

K&amp;N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

Product lines include: K&amp;N Fuel Injection Kits, FIPK, K&amp;N 77 Series High Flow Air Intakes, K&amp;N Typhoon Air Intake Systems, K&amp;N AirCharger, K&amp;N 57i Air Induction Kits, K&amp;N Cold Air Intake Filters, and Stock Replacement Air Filters.

Back as far as 1969 K&amp;N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&amp;N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K &amp; N products can be found in more than thirty countries around the world. There is a reason K &amp; N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

If you need more power, consider the gains that can be achieved by installing a K&amp;N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&amp;N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K &amp; N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K &amp; N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

Cadillac

These are some of the items you can find at LMPerformance for your Cadillac

LMPerformance offers a range of possibilities for your iconic Cadillac when it comes to exhausts thus affording you the option to choose what's best for your car depending on the model and year and your objective.

Cadillac CTS-V see what a difference 100% U.S. made 304 S/S header system designed by American Racing Headers will make when it releases serious horsepower by eliminating one of the most restrictive factory exhaust systems ever. For CTS-V owners needing a complete system American Racing Headers added the Pure Thunder Series Mufflers and 4 Double Walled Polished S/S Tips and the system is manufactured entirely in the U.S so you can be confident of its quality. American Racing Header wanted you to have an outstanding sounding system as well and they wanted the tone to be deep without a rasp so they designed it to be able to endure over 1000 RWHP. For an eye-catching look for both sound and appearance you won’t regret your decision to change to an American Racing Header full exhaust and header system.

You can’t go wrong with a prestigious company like Kooks who has been in business for almost fifty years and has the inimitable reputation to prove it. Whether it be a long tube header, CATTED x-pipe, CATTED connection, off-road connection, off-road X-pipe, or axle back exhaust Kooks headers will exceed the standard you have set for your Cadillac CTS-V and Escalade. KOOKS, one of the first in the stainless steel header revolution, are one of the most innovative and does all their designing, manufacturing and testing right here in the good, old USA. For your CTS-V take a look at the CATTED Connection Pipes, CATTED X-Pipes, Off Road Connection Pipes, Off Road X-Pipes and Long Tube Headers, and for your Escalade check out our Long Tube Headers, Off Road and CATTED Y-Pipes.

For the CTS-V, Escalade and XLR there is the inimitable Billy Boat line of exhaust products that start with the epitome of materials practical for after-cat exhaust applications and the design of the tubing guarantees a perfect fit. The exhaust system for the CTS-V is available as a Touring or x-pipe system, with the Touring System for those who want a milder sound. And for the XLR there is the Fusion, a one-of-a-kind design with two passages that allow the exhaust to travel through with the two outlets for a “quiet side” and a “loud side”.

The consummate manufacturer CORSA can equip your Cadillac CTS-V, Escalade, Seville, STS, and XLR with an inimitable exhaust system such as their cat back exhaust, axle back exhaust, sport system, tips, sport or touring system and pro series. The CORSA exhaust has been engineered and the acoustics styled to coordinate with your make and model so that you will not experience drone yet will have the aggressive sound you want. There are three levels of sound from CORSA from the loudest too softest so that every option is available to you the discriminating buyer.

Another great option for you Cadillac CTS-V, Escalade, CTS and STS owners is the prestigious BORLA with its 7 to 10 percent gains in horsepower and bolt on installation. The BORLA exhaust is a great looking system with the BORLA’S sui generis Inter cooled Tips for an idiosyncratic look e seen ubiquitously on show and street cars providing your vehicle with the same idiosyncratic look as these winners. For your CTS there is the Rear Section Exhaust Touring or the Cat Back System, for the Rear Section S Pipe, Street Cat Back, X Pipe, Rear Section-Touring, Cat-Back, and the MT RWD, for your Escalade the Street Cat-Back, AWD AT, RWD/ AWD AT Cat- Back and the AWD, and for your STS the RWT AT Cat-Back.

Still more choices for your Cadillac CTS-V with the iconic manufacturer Stainless Works, an American manufacturer, whose product line of exhaust systems, headers and off road pipes are made from only the finest more expensive grade stainless and as a consequence will never rust For your CTS-V you will find Off-Road and Cat Back Headers, Exhaust Systems with X-Pipes, Axle-Back Exhausts, Off- Road and Catted with X-Pipes, CATTED with X-Pipes, CATTED, Off-Road, Dual S- Tube System with X-Pipe, Chambered System with X-Pipe, CATTED with Resonator and others.

A power programmer tuner can help you increase your Cadillac's horsepower, torque and fuel efficiency by altering your onboard computer's settings for timing, turbo boosts, fuel-to-air ratio and more and the the DIABLOSPORT Trinity Tuner comes preloaded tunes for your use if you so desire. With the Diablo in Tune i2 performance tuner you can easily aggrandize your car's power, make the throttle more responsive, optimize shift patterns, or even add some bottom-end horsepower and it comes equipped with “Easy Tune” making it a snap to install.

For the CTS, CTS-V and Escalade performance look there is none better than DURAFLEX for a prodigious selection of Hoods, Side Rocker Panels, Skirt Rocker panels, Rear Bumper Covers, Body Kits, Look Hood, Look and Platinum Front Bumper Cover, Platinum Front Bumper Cover, Fenders, Front Lip Under Spoiler Air Dams, Cowl Hoods and more. Parts are model specific and may not be available in all selections for your car but just use the drop down key to find the right DURAFLEX part for your Cadillac, The consummate manufacturer Extreme Dimensions created DURAFLEX by the perfect marriage of fiberglass, plastic, and flex resins for greater durability and a great look.

^