BMW 3-Series K&N Engineering Air Filters - Direct Fit: air filter

x RESET VEHICLE

  • K&N Engineering
  • Shop our extensive catalog of Cold Air Intakes and Air Filters.

    K&N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

    GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

    GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

    Product lines include: K&N Fuel Injection Kits, FIPK, K&N 77 Series High Flow Air Intakes, K&N Typhoon Air Intake Systems, K&N AirCharger, K&N 57i Air Induction Kits, K&N Cold Air Intake Filters, and Stock Replacement Air Filters.

    Back as far as 1969 K&N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K & N products can be found in more than thirty countries around the world. There is a reason K & N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

    If you need more power, consider the gains that can be achieved by installing a K&N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K & N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K & N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

<< FIRST < PREV ...   NEXT > LAST >>
  • BMW 3-Series K&N Engineering Air Filters - Direct Fit: air filter
  • SELECT CATEGORY
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:

K&N Engineering

About K&N Engineering

Shop our extensive catalog of Cold Air Intakes and Air Filters.

K&amp;N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

Product lines include: K&amp;N Fuel Injection Kits, FIPK, K&amp;N 77 Series High Flow Air Intakes, K&amp;N Typhoon Air Intake Systems, K&amp;N AirCharger, K&amp;N 57i Air Induction Kits, K&amp;N Cold Air Intake Filters, and Stock Replacement Air Filters.

Back as far as 1969 K&amp;N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&amp;N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K &amp; N products can be found in more than thirty countries around the world. There is a reason K &amp; N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

If you need more power, consider the gains that can be achieved by installing a K&amp;N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&amp;N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K &amp; N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K &amp; N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

BMW

These are some of the items you can find at LMPerformance for your BMW

If you own a BMW, the luxury German car, then we know you appreciate the finer things in life and want top quality performance out of your car and we want to help you do that with the prestigious array of performance parts available on our web site. Parts like those from the inimitable SPEC Clutch line with Clutch Kits from street kit Stage 1,2,2+, 3, and 3+ to Race Kits Stage 4 and 5 and the Mini Twin and in the SPEC Super Twin for the M6, M5 and M3. We know you don’t want a cookie cutter clutch but one that satisfies your driving needs and the stage selection of the SPEC clutch is determined primarily by use, rather it be for street use or more high performance use such as racing or autocross. and by materials used to manufacture the various clutches such as molded carbon KEVLAR, full faced Kevlar with steel backing, carbon semi-metallic on one side, carbon semi-metallic 6 puck sprung or not sprung, carbon semi-metallic with a double sprung hub, solid hub with 8 rivets or full-metallic disc- all decided by you, the driver. The pressure plate in your BMW is the driving force between your engine's power and the drive line and if you are doing intense driving you need a performance pressure plate like the one from SPEC for increased holding power. Another great product from SPEC, the billet flywheel exceeds the industry standard of .010 tolerances by a considerable amount with the .001 tolerance guaranteeing ideal balance and flat bedding and can be rebuilt and have a replaceable steel friction plate and they are a lightweight alternative to your factory flywheel.

Several estimable exhaust kit options are available for your BMW and one such brand is CORSA Performance, a renowned manufacturer of aftermarket performance exhausts. CORSA Performance features straight unrestricted flow mufflers and are available depending on application in 3 different sound levels to suit your taste. For example, CORSA'S BMW M3 exhaust system features a patented non-restrictive straight-through design resulting in the reduction of back pressure and freeing up much needed power all resulting in improved horsepower and torque. Since there is no drone because of CORSA’S own RSC Reflective Sound Cancellation technology, you never need to worry about the that annoyance just expect great sound.

Another very popular choice by BMW enthusiasts are the B&B (Billy Boat) exhausts which are made right here in the U.S. in Arizona. They feature 304 mandrel bent Stainless steel and come in several muffler styles such as the Bullets, PRT, and Fusion. B&B tunes each muffler to match its application for the best possible performance gain and sound quality combination. Billy Boat recently started to incorporate the PRT technology into all of their muffler systems. PRT Technology allows true straight through exhaust passage under aggressive driving, though a mellow sound is emitted at cruising speed thanks to the unique Purge Chamber. The use of two distinct packing materials and several S.C.C.’S inside the BILLY BOAT muffler enable them to create a harmonious sound that will have heads turning when you drive by.