866.567.2001 8am-5pm M-F / 8am-12pm Saturday Central

Audi TT Green Filter Air Filters Air Filters - Drop In

<< FIRST < PREV ...   NEXT > LAST >>
  • Audi TT Green Filter Air Filters Air Filters - Drop In
  • SELECT CATEGORY
  • Green Filter PRODUCT LINE(S)
  • SELECT BRAND
  • Audi TT Green Filter Air Filters Air Filters - Drop In
SORT BY:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Green Filter

Green Filter

About Green Filter

A clean air filter is your car’s first line of defense when it comes to keeping your engine clean and helping you to get top notch performance from your car and this is especially true in the racing venue. Mark German, an entrepreneur with racing experience and parts manufacturing experience, recognized the importance of the filter in providing horsepower and acknowledged the lack of a then available filter to produce the performance results he felt were possible. And as a consequence in 2001 he set as his goal the design of a filter that would be second to none hence the beginning of Green Filter’s impressive history. Today Green Filter is known as one of the leading manufacturers of filters and they are utilized by many prominent racing engineers, engine builders and drivers and are the result of Mark German’s desire to design a filter that would outperform others.

There are lots of filters out there so are probably asking why choose a Green Filter and we are here to tell you a few things that might help you along in your selection process. Let’s tell you something about the makeup of the Green Filter and you can decide for yourself. First of all Green Filters have deep pleats in the double-layered cotton so that their filtration surface is increased by 10 to 15 percent for greater air flow and the specially designed cotton filter traps particles as small as 5 microns so you have the excellent combination or increased air flow and superior filtration and that is no small feat.

For strength and dent resistance Green Filter encased their cotton filter in steel wire mesh so no problem here when you are in tough conditions like racing on dirt, sand and pavement. And the low pressure molding utilized by Green Filter with its four step production process virtually eliminates rubber seepage and the inherent restricted air flow that results when rubber seeps on to the filter. The custom molds employed by Green Filter result in an airtight seal that absorbs vibrations to assure you that you are getting the optimal fit for your car, no reusing elements between filters here.

And, of course, none of this would be possible without the commitment and dedication of the team at Green Filter whose history in the racing arena and production technology are second to none and who continually improves so that they are utilizing the very best to serve you the best.

So whether you are looking to add horsepower on the road or at the track or just get better fuel economy then consider the Green Filter that will look great and is easy to clean and won’t interfere in your engine monitoring system. The Green Filters are designed to be cleaned with the recommended biodegradable cleaner and synthetic oil and reused so you not only save money but also help the environment. And your Green Filter is made right here in the USA in Mount Braddock, Pennsylvania utilizing materials manufactured in the USA.

Audi

These are some of the items you can find at LMPerformance for your Audi

Progress through Technology- is the company ethos and is the core belief that drives the development of every Audi vehicle and if you are the proud owner of an Audi you deserve the best for your vehicle and Late Model Performance wants to help you get what you deserve.

LMPerformance is proud to offer high quality exhaust systems for your Audi by B&B (Billy Boat) Exhausts. B&B Systems feature an exotic sound that is never too loud. B&B Exhausts are made in the USA and are constructed of high Quality 304 Stainless Steel.

The Sport Lowering Springs from B & G Suspension for your Audi 200, 4000, 5000, 80. 90, A3, A4, A5, A6, A8, S4, S5, S6 and TT can give your Audi that race car look but as an added incentive to make the change consider the fact that they will promote better handling and road holding because you are reducing the distance between your car and the floor and as a consequence are altering the air flow under the car. The B&G springs are manufactured to the high standards you want in lowering springs so that they are long lasting and corrosion resistant.

Washable and reusable filters from the inimitable K & N can be beneficial in increasing horsepower in your Audi but consider that with the addition of an air intake system you can eliminate air restrictions built into your factory system for even greater results. The 57 series air intake systems for your A3, Quattro and TT will produce a marked improvement in your engine’s performance and you won’t be disappointed in your decision to make this change. The K&N Performance Kit for your A3, A4, Quattro and TT; the International Kit for the A3, A4, A6, RS4, TT, A6, A3 all have an oversized air filter and are attached to rotationally molded tubes of High Density Polyethylene g for precise shaping so that there is a resultant reduction in turbulence and freer path for air flow into your Audi engine.

Replacing your clutch either out of necessity, improvement or just racing fun will be worth the investment with an outstanding clutch from SPEC. The SPEC products are available as full Clutch Kits, Clutch Disks and Clutch Pressure Plates for your Audi and because SPEC knows not all drivers are alike they offer you a multiplicity of choices for your new clutch so that you can match your clutch to your driving needs rather than matching your driving to your clutch’s needs. Also for the discriminating buyer we have the SPEC billet flywheels, manufactured to the highest standards with a .001 machine tolerance for a perfect seating surface on your Audi clutch for those who need a lighter weight flywheel for their driving demands.

For even more improved performance replace your OEM shocks with the premier high performance shocks from KONI. The KONI shocks and shock and spring kits and are obtainable in the yellow sport that can be used with spring kits, the orange street, and the FSD Gold that adjust automatically to road conditions. KONI Coil Over Kits for your Audi TT, A3 and A4 are an enhancement to your Audi because they produce better road holding and a captivating look and the give you the ability to individualize your ride height. KONI is known worldwide for the manufacture of performance and adjustable shocks that are of superlative quality.

Installing the EIBACH Sway Bar Kit to your Audi A3 will fine-tune the performance handling of your car, reduce body roll and result in improved corner gripping and since it is manufactured by the prestigious EIBACH company you get a million-mile warranty because they believe in their product. Or, better yet, consider the Sport-Plus for your Audi A3 that includes the EIBACH SPORTLINE Springs and Anti-Roll Kit Sway Bars so that you reduce squat during acceleration, body roll and excessive nose-dive. Consider Coil-Over Kits for your A3, A4, S4 and TT to get your Audi looking and performing its best or install lowering kits on your A3, A4, A5, A6, S4, S5 and TT to lower your car's center of gravity resulting in high performance and an extremely low and comfortable ride- all from the prestigious manufacturer EIBACH.

Whether out of necessity because of repair, for improvement in appearance, or for aerodynamics in racing, choosing body parts can be overwhelming.

but with extraordinary manufacturers like Seibon and Duraflex the job is easy. Seibon Carbon components are made of high-quality carbon fiber and whether it be trunk panels for your A4 and A8, Hoods for your A3, A4, A5, A8 or TT, or Rear Wings for your TT you will get the best with Seibon because every part has an exceptional carbon/resin ration for extra strength and comes with a glossy clear coat. The eminent manufacturer Duraflex can indulge your Audi with Body Kits, Bumpers, Rear Lips, Front Spoilers, Door Caps, Fender Flares, Grilles, Hoods, Rear Wings, Side Scoops, Side Skirts and Trunk Panels fabricated from its extraordinary composite of fiberglass, plastic and resins that present you with a product that is eminently more durable at an affordable price and ready for a paint job because they come primed.

^

LM Performance Shopper Approved Reviews