2013 Audi S5 DEI Air Induction

x RESET VEHICLE

  • DEI

  • Design Engineering, Inc. (DEI) has been in the marketplace for twenty five years with the goal of providing their customers with outstanding quality heating and noise control products. It all started in1995 with the late Dale Markley in Cleveland, Ohio, who was set on developing answers to the problems facing racing and performance drivers underhood, power-robbing heat issues. The company’s success was evident when they had to double their working space in a short time and then in 2004 had to relocate to a new facility and a larger complex. But it is no surprise that the company has been growing ever since when you consider their impressive product line.

    The DEI Form-A-Shield is a perfect example of the Design Engineering ingenuity because it can be used as a barrier to reflect and insulate a multiplicity of heat sources providing primo heat protection in areas where high heat is present and may be difficult to insulate. Because it is only 3/16th of an inch thick Form-A-Shiel...Read More

<< FIRST < PREV ...   NEXT > LAST >>
  • 2013 Audi S5 DEI Air Induction
  • SELECT CATEGORY
  • SELECT BRAND
  • 2013 Audi S5 DEI Air Induction
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:

DEI

About DEI

Design Engineering, Inc. (DEI) has been in the marketplace for twenty five years with the goal of providing their customers with outstanding quality heating and noise control products. It all started in1995 with the late Dale Markley in Cleveland, Ohio, who was set on developing answers to the problems facing racing and performance drivers underhood, power-robbing heat issues. The company’s success was evident when they had to double their working space in a short time and then in 2004 had to relocate to a new facility and a larger complex. But it is no surprise that the company has been growing ever since when you consider their impressive product line.

The DEI Form-A-Shield is a perfect example of the Design Engineering ingenuity because it can be used as a barrier to reflect and insulate a multiplicity of heat sources providing primo heat protection in areas where high heat is present and may be difficult to insulate. Because it is only 3/16th of an inch thick Form-A-Shield can be custom fitted to fit in even tight quarters. Having problems with your old hood insulation well look no further than Design Engineering, Inc. for a new Precut Underhood Insulation Kit that is sure to fit perfectly with its peel and stick design for ease of installation.

Design Engineering,Inc. didn’t stop with heating products but rather tackled those noise problems in your car as well with products like their Boom Mat Damping Material that will solve all those pesky noises from vibration, squeaks and rattles regardless of the source. Its 4 mil aluminum stiffening top skin and noise constraining layer will quiet even the most difficult situations and it is easy to install with an easy peel plastic release liner.

Audi

These are some of the items you can find at LMPerformance for your Audi

Progress through Technology- is the company ethos and is the core belief that drives the development of every Audi vehicle and if you are the proud owner of an Audi you deserve the best for your vehicle and Late Model Performance wants to help you get what you deserve.

LMPerformance is proud to offer high quality exhaust systems for your Audi by B&B (Billy Boat) Exhausts. B&B Systems feature an exotic sound that is never too loud. B&B Exhausts are made in the USA and are constructed of high Quality 304 Stainless Steel.

The Sport Lowering Springs from B & G Suspension for your Audi 200, 4000, 5000, 80. 90, A3, A4, A5, A6, A8, S4, S5, S6 and TT can give your Audi that race car look but as an added incentive to make the change consider the fact that they will promote better handling and road holding because you are reducing the distance between your car and the floor and as a consequence are altering the air flow under the car. The B&G springs are manufactured to the high standards you want in lowering springs so that they are long lasting and corrosion resistant.

Washable and reusable filters from the inimitable K & N can be beneficial in increasing horsepower in your Audi but consider that with the addition of an air intake system you can eliminate air restrictions built into your factory system for even greater results. The 57 series air intake systems for your A3, Quattro and TT will produce a marked improvement in your engine’s performance and you won’t be disappointed in your decision to make this change. The K&N Performance Kit for your A3, A4, Quattro and TT; the International Kit for the A3, A4, A6, RS4, TT, A6, A3 all have an oversized air filter and are attached to rotationally molded tubes of High Density Polyethylene g for precise shaping so that there is a resultant reduction in turbulence and freer path for air flow into your Audi engine.

Replacing your clutch either out of necessity, improvement or just racing fun will be worth the investment with an outstanding clutch from SPEC. The SPEC products are available as full Clutch Kits, Clutch Disks and Clutch Pressure Plates for your Audi and because SPEC knows not all drivers are alike they offer you a multiplicity of choices for your new clutch so that you can match your clutch to your driving needs rather than matching your driving to your clutch’s needs. Also for the discriminating buyer we have the SPEC billet flywheels, manufactured to the highest standards with a .001 machine tolerance for a perfect seating surface on your Audi clutch for those who need a lighter weight flywheel for their driving demands.

For even more improved performance replace your OEM shocks with the premier high performance shocks from KONI. The KONI shocks and shock and spring kits and are obtainable in the yellow sport that can be used with spring kits, the orange street, and the FSD Gold that adjust automatically to road conditions. KONI Coil Over Kits for your Audi TT, A3 and A4 are an enhancement to your Audi because they produce better road holding and a captivating look and the give you the ability to individualize your ride height. KONI is known worldwide for the manufacture of performance and adjustable shocks that are of superlative quality.

Installing the EIBACH Sway Bar Kit to your Audi A3 will fine-tune the performance handling of your car, reduce body roll and result in improved corner gripping and since it is manufactured by the prestigious EIBACH company you get a million-mile warranty because they believe in their product. Or, better yet, consider the Sport-Plus for your Audi A3 that includes the EIBACH SPORTLINE Springs and Anti-Roll Kit Sway Bars so that you reduce squat during acceleration, body roll and excessive nose-dive. Consider Coil-Over Kits for your A3, A4, S4 and TT to get your Audi looking and performing its best or install lowering kits on your A3, A4, A5, A6, S4, S5 and TT to lower your car's center of gravity resulting in high performance and an extremely low and comfortable ride- all from the prestigious manufacturer EIBACH.

Whether out of necessity because of repair, for improvement in appearance, or for aerodynamics in racing, choosing body parts can be overwhelming.

but with extraordinary manufacturers like Seibon and Duraflex the job is easy. Seibon Carbon components are made of high-quality carbon fiber and whether it be trunk panels for your A4 and A8, Hoods for your A3, A4, A5, A8 or TT, or Rear Wings for your TT you will get the best with Seibon because every part has an exceptional carbon/resin ration for extra strength and comes with a glossy clear coat. The eminent manufacturer Duraflex can indulge your Audi with Body Kits, Bumpers, Rear Lips, Front Spoilers, Door Caps, Fender Flares, Grilles, Hoods, Rear Wings, Side Scoops, Side Skirts and Trunk Panels fabricated from its extraordinary composite of fiberglass, plastic and resins that present you with a product that is eminently more durable at an affordable price and ready for a paint job because they come primed.

^