Audi A3 K&N Engineering Cold Air Intakes

x RESET VEHICLE

  • K&N Engineering

  • Shop our extensive catalog of Cold Air Intakes and Air Filters.

    K&N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

    GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

    GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

    Product lines include: K&N Fuel Injection Kits, FIPK, K&N 77 Series High Flow Air Intakes, K&N Typhoon Air Intake Systems, K&N AirCharger, K&N 57i Air Induction Kits, K&N Cold Air Intake Filters, and Stock Replacement Air Filters.

    Back as far as 1969 K&N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K & N products can be found in more than thirty countries around the world. There is a reason K & N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

    If you need more power, consider the gains that can be achieved by installing a K&N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K & N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K & N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

<< FIRST < PREV

Page: 1 of 15

  • Audi A3 K&N Engineering Cold Air Intakes
  • SELECT CATEGORY
SHOW UNIVERSAL PARTS: SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 15

K&N Engineering

About K&N Engineering

Shop our extensive catalog of Cold Air Intakes and Air Filters.

K&amp;N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

Product lines include: K&amp;N Fuel Injection Kits, FIPK, K&amp;N 77 Series High Flow Air Intakes, K&amp;N Typhoon Air Intake Systems, K&amp;N AirCharger, K&amp;N 57i Air Induction Kits, K&amp;N Cold Air Intake Filters, and Stock Replacement Air Filters.

Back as far as 1969 K&amp;N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&amp;N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K &amp; N products can be found in more than thirty countries around the world. There is a reason K &amp; N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

If you need more power, consider the gains that can be achieved by installing a K&amp;N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&amp;N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K &amp; N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K &amp; N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

Audi

These are some of the items you can find at LMPerformance for your Audi

Progress through Technology- is the company ethos and is the core belief that drives the development of every Audi vehicle and if you are the proud owner of an Audi you deserve the best for your vehicle and Late Model Performance wants to help you get what you deserve.

LMPerformance is proud to offer high quality exhaust systems for your Audi by B&B (Billy Boat) Exhausts. B&B Systems feature an exotic sound that is never too loud. B&B Exhausts are made in the USA and are constructed of high Quality 304 Stainless Steel.

The Sport Lowering Springs from B & G Suspension for your Audi 200, 4000, 5000, 80. 90, A3, A4, A5, A6, A8, S4, S5, S6 and TT can give your Audi that race car look but as an added incentive to make the change consider the fact that they will promote better handling and road holding because you are reducing the distance between your car and the floor and as a consequence are altering the air flow under the car. The B&G springs are manufactured to the high standards you want in lowering springs so that they are long lasting and corrosion resistant.

Washable and reusable filters from the inimitable K & N can be beneficial in increasing horsepower in your Audi but consider that with the addition of an air intake system you can eliminate air restrictions built into your factory system for even greater results. The 57 series air intake systems for your A3, Quattro and TT will produce a marked improvement in your engine’s performance and you won’t be disappointed in your decision to make this change. The K&N Performance Kit for your A3, A4, Quattro and TT; the International Kit for the A3, A4, A6, RS4, TT, A6, A3 all have an oversized air filter and are attached to rotationally molded tubes of High Density Polyethylene g for precise shaping so that there is a resultant reduction in turbulence and freer path for air flow into your Audi engine.

Replacing your clutch either out of necessity, improvement or just racing fun will be worth the investment with an outstanding clutch from SPEC. The SPEC products are available as full Clutch Kits, Clutch Disks and Clutch Pressure Plates for your Audi and because SPEC knows not all drivers are alike they offer you a multiplicity of choices for your new clutch so that you can match your clutch to your driving needs rather than matching your driving to your clutch’s needs. Also for the discriminating buyer we have the SPEC billet flywheels, manufactured to the highest standards with a .001 machine tolerance for a perfect seating surface on your Audi clutch for those who need a lighter weight flywheel for their driving demands.

For even more improved performance replace your OEM shocks with the premier high performance shocks from KONI. The KONI shocks and shock and spring kits and are obtainable in the yellow sport that can be used with spring kits, the orange street, and the FSD Gold that adjust automatically to road conditions. KONI Coil Over Kits for your Audi TT, A3 and A4 are an enhancement to your Audi because they produce better road holding and a captivating look and the give you the ability to individualize your ride height. KONI is known worldwide for the manufacture of performance and adjustable shocks that are of superlative quality.

Installing the EIBACH Sway Bar Kit to your Audi A3 will fine-tune the performance handling of your car, reduce body roll and result in improved corner gripping and since it is manufactured by the prestigious EIBACH company you get a million-mile warranty because they believe in their product. Or, better yet, consider the Sport-Plus for your Audi A3 that includes the EIBACH SPORTLINE Springs and Anti-Roll Kit Sway Bars so that you reduce squat during acceleration, body roll and excessive nose-dive. Consider Coil-Over Kits for your A3, A4, S4 and TT to get your Audi looking and performing its best or install lowering kits on your A3, A4, A5, A6, S4, S5 and TT to lower your car's center of gravity resulting in high performance and an extremely low and comfortable ride- all from the prestigious manufacturer EIBACH.

Whether out of necessity because of repair, for improvement in appearance, or for aerodynamics in racing, choosing body parts can be overwhelming.

but with extraordinary manufacturers like Seibon and Duraflex the job is easy. Seibon Carbon components are made of high-quality carbon fiber and whether it be trunk panels for your A4 and A8, Hoods for your A3, A4, A5, A8 or TT, or Rear Wings for your TT you will get the best with Seibon because every part has an exceptional carbon/resin ration for extra strength and comes with a glossy clear coat. The eminent manufacturer Duraflex can indulge your Audi with Body Kits, Bumpers, Rear Lips, Front Spoilers, Door Caps, Fender Flares, Grilles, Hoods, Rear Wings, Side Scoops, Side Skirts and Trunk Panels fabricated from its extraordinary composite of fiberglass, plastic and resins that present you with a product that is eminently more durable at an affordable price and ready for a paint job because they come primed.

^