866.567.2001 8am-5pm M-F Central

Audi ST Suspensions

<< FIRST < PREV

Page: 1 of 4

  • Audi ST Suspensions
  • SELECT CATEGORY
SORT BY:
VIEW:
<< FIRST < PREV PAGE: 1 / 4
ST Suspensions

ST Suspensions

About ST Suspensions

Well before SUSPENSION TECHNIQUES and its sister company BELLTECH joined the impressive KW AUTOMOTIVE NORTH AMERICA, INC. in 2005 it was already on its way to becoming one of the leaders when it came to height adjustable coil-overs, lowering coil springs, and anti-sway bars but it also led to a name change from SUSPENSION TECHNIQUES to ST SUSPENSIONS. ST SUSPENSIONS formerly SUSPENSION TECHNIQUES can trace it history back to the 1980’s in Southern California, the perfect place for any company designing aftermarket suspension products because there were lowered vehicles all over Southern California by then. ST SUSPENSIONS (SUSPENSION TECHNIQUES) realized the market was ripe for new nonpareil products and went about the necessary task of designing and developing innovative products that would result in the company’s success in the marketplace. ST SUSPENSIONS (SUSPENSION TECHNIQUES) knew that the anti-sway bar in a vehicle prevented body lean when the vehicle is turning by applying force to the suspension on each side, upward on one side and downward on the other to resist leaning and they knew this was particularly important in a high performance vehicle and in a racing situation. The team at ST SUSPENSIONS (SUSPENSION TECHNIQUES} also knew that cars that undergo excessive turning forces must maximize tire grip especially on smooth roads and in order to do this they need large, strong sway bars and this is especially true of high power cars like the Mustang or Firebird and they set about designing anti-sway bars that would do just that. As a result of their efforts ST SUSPENSION (SUSPENSION TECHNIQUES} name became well-established in the aftermarket suspension marketplace and by motorsports enthusiasts. When KW AUTOMOTIVE GMBH purchased SUSPENSION TECHNIQUES it provided SUSPENSION TECHNIQUES with the opportunity of becoming part of a much larger picture with possibilities inherent in multi company situations; such as a sharing of ideas that lead to new innovation and more expansive marketplace. The anti-sway bars developed by ST SUSPESION (SUSPENSION TECHNIQUES) are the result of years of experience and that is evident when you consider the rewards they provide in improved handling, increased traction, improved balance with no loss in spring comfort. Not only that but they minimize the load differences between the curve outside and inside wheels, are made of primo quality spring steel and have bearings that are manufactured from superlative composite materials. The ST SUSPENSION (SUSPENSION TECHNIQUES) Sway-bar kit for your Pontiac Firebird, Formula, Trans Am 1993-2002 V8 / V6 or your Chevrolet Camaro 1993-2002is a perfect example of the quality of product with its 35mm front and 25mm rear bar complete with red poly-bushings and end links to make your Firebird handle better on those dangerous curves. Take a look at these on the LMPERFORMANCE web site and see if they will meet your Camaro, Firebird, Formula, or Trans Am needs and let us help you get the improved performance around those curves so that you are first at the finish line and let us help you get them at a competitive price and with free shipping.

Audi

These are some of the items you can find at LMPerformance for your Audi

Progress through Technology- is the company ethos and is the core belief that drives the development of every Audi vehicle and if you are the proud owner of an Audi you deserve the best for your vehicle and Late Model Performance wants to help you get what you deserve.

LMPerformance is proud to offer high quality exhaust systems for your Audi by B&B (Billy Boat) Exhausts. B&B Systems feature an exotic sound that is never too loud. B&B Exhausts are made in the USA and are constructed of high Quality 304 Stainless Steel.

The Sport Lowering Springs from B & G Suspension for your Audi 200, 4000, 5000, 80. 90, A3, A4, A5, A6, A8, S4, S5, S6 and TT can give your Audi that race car look but as an added incentive to make the change consider the fact that they will promote better handling and road holding because you are reducing the distance between your car and the floor and as a consequence are altering the air flow under the car. The B&G springs are manufactured to the high standards you want in lowering springs so that they are long lasting and corrosion resistant.

Washable and reusable filters from the inimitable K & N can be beneficial in increasing horsepower in your Audi but consider that with the addition of an air intake system you can eliminate air restrictions built into your factory system for even greater results. The 57 series air intake systems for your A3, Quattro and TT will produce a marked improvement in your engine’s performance and you won’t be disappointed in your decision to make this change. The K&N Performance Kit for your A3, A4, Quattro and TT; the International Kit for the A3, A4, A6, RS4, TT, A6, A3 all have an oversized air filter and are attached to rotationally molded tubes of High Density Polyethylene g for precise shaping so that there is a resultant reduction in turbulence and freer path for air flow into your Audi engine.

Replacing your clutch either out of necessity, improvement or just racing fun will be worth the investment with an outstanding clutch from SPEC. The SPEC products are available as full Clutch Kits, Clutch Disks and Clutch Pressure Plates for your Audi and because SPEC knows not all drivers are alike they offer you a multiplicity of choices for your new clutch so that you can match your clutch to your driving needs rather than matching your driving to your clutch’s needs. Also for the discriminating buyer we have the SPEC billet flywheels, manufactured to the highest standards with a .001 machine tolerance for a perfect seating surface on your Audi clutch for those who need a lighter weight flywheel for their driving demands.

For even more improved performance replace your OEM shocks with the premier high performance shocks from KONI. The KONI shocks and shock and spring kits and are obtainable in the yellow sport that can be used with spring kits, the orange street, and the FSD Gold that adjust automatically to road conditions. KONI Coil Over Kits for your Audi TT, A3 and A4 are an enhancement to your Audi because they produce better road holding and a captivating look and the give you the ability to individualize your ride height. KONI is known worldwide for the manufacture of performance and adjustable shocks that are of superlative quality.

Installing the EIBACH Sway Bar Kit to your Audi A3 will fine-tune the performance handling of your car, reduce body roll and result in improved corner gripping and since it is manufactured by the prestigious EIBACH company you get a million-mile warranty because they believe in their product. Or, better yet, consider the Sport-Plus for your Audi A3 that includes the EIBACH SPORTLINE Springs and Anti-Roll Kit Sway Bars so that you reduce squat during acceleration, body roll and excessive nose-dive. Consider Coil-Over Kits for your A3, A4, S4 and TT to get your Audi looking and performing its best or install lowering kits on your A3, A4, A5, A6, S4, S5 and TT to lower your car's center of gravity resulting in high performance and an extremely low and comfortable ride- all from the prestigious manufacturer EIBACH.

Whether out of necessity because of repair, for improvement in appearance, or for aerodynamics in racing, choosing body parts can be overwhelming.

but with extraordinary manufacturers like Seibon and Duraflex the job is easy. Seibon Carbon components are made of high-quality carbon fiber and whether it be trunk panels for your A4 and A8, Hoods for your A3, A4, A5, A8 or TT, or Rear Wings for your TT you will get the best with Seibon because every part has an exceptional carbon/resin ration for extra strength and comes with a glossy clear coat. The eminent manufacturer Duraflex can indulge your Audi with Body Kits, Bumpers, Rear Lips, Front Spoilers, Door Caps, Fender Flares, Grilles, Hoods, Rear Wings, Side Scoops, Side Skirts and Trunk Panels fabricated from its extraordinary composite of fiberglass, plastic and resins that present you with a product that is eminently more durable at an affordable price and ready for a paint job because they come primed.

^

LM Performance Shopper Approved Reviews