DeWitts 4139070A | Radiator and Fan Corvette, SB Auto Dual 11" Fans and, Natural; 1969-1972

  • Chevrolet Corvette DeWitts Radiator Fan Combo
  • Chevrolet Corvette DeWitts Radiator Fan Combo
  • DeWitts 4139070A | Radiator and Fan Corvette, SB Auto Dual 11" Fans and, Natural; 1969-1972

    • Catalog #: 00840423
    • MPN: 4139070A
    • $999.99

    • + Add to Wish List

Product Description

DeWitts 4139070A - DeWitts Radiator and Fan Corvette, SB Auto Dual 11" Fans and, Natural; 1969-1972.

The best of both worlds! This kit includes our Direct fit aluminum radiator and the SP460 dual fan assembled into one high-performance package. The dual fans eliminate the factory shroud and engine driven fans. All the necessary relays, fuses, and wiring is included. As a bonus, we add a port to the radiator and install the temperature switch, so you don't have to.

Attention: This model radiator was only used on Corvettes that originally came with factory options, such as Automatic transmissions, Air conditioning, or special engine options such as LT1. Base cars with no options used a smaller aluminum radiator with the separate surge tank. This radiator is for all 69-72 350 small block Corvettes with automatic transmission and/or AC. This direct fit aluminum radiator features factory type press formed end tanks, dual row core, serpentine fins, and the factory type upper and lower channels. This radiator will provide 30% more cooling than the stock copper unit and half the weight. It is also epoxy free. It will fit into the stock core support and uses the original factory hoses. Absolutely no modifications are required.

Finish: Natural Finish

Core Design: Dual Row 1 inch Tubes

Cooler Option: Automatic Trans

Port: TL/BR

DeWitt Radiator's DIRECT FIT aluminum radiators are designed to install into the stock mounting and use the factory connections without any modifications or adapters. The term DIRECT FIT gets thrown around a lot today. Many companies offer replacement radiators and most of them require some alterations, even when they claim they fit. Each DIRECT FIT radiator starts with a USA made core, furnace brazed in our own furnace. Our cores feature two rows of cooling tubes, serpentine fin and they are epoxy free. Press formed end tanks are manually tig welded by expert craftsmen, providing the ultimate in strength and appearance. Many companies build Corvette radiators, only one specializes in it. Quality Made in the USA!

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit

California Residents: CARB WARNING: LMPerformance will not ship any products that are not CARB approved to California. This only affects CARB related products such that affect car performance and emissions where CARB approval is required.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc.

* FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous contential US only. All other locations extra.

Search Terms: 4139070A DEW4139070A DeWitts Radiator and Fan Corvette, SB Auto Dual 11" Fans and, Natural Chevrolet Cooling Radiator Fan Combo DeWitts Radiator and Fan Corvette SB Auto Dual 11" Fans and Natural 1969 1970 1971 1972

DeWitts Warranty Policy

LIFETIME WARRANTY DeWitts Radiator, LLC. (DRL) warrants all aluminum radiators to be free from defects in materials and workmanship for as long as you own the vehicle in which it was originally installed. This warranty is extended only to the first purchaser of any such radiator at retail. Proof of purchase must be provided in the way of a sale receipt from DRL or an authorized dealer. If the radiator is used in any racing application this warranty is considered null and void.

This warranty does not cover labor, materials not manufactured by DRL, or shipping charges. Radiators repaired or altered by parties outside DRL are not covered by this warranty. The retail purchaser is responsible for the appropriate use and application of the product. This warranty does not cover the effects of physical or chemical properties of water, steam, or other liquids used in the radiator. Radiators used without an adequate proportion of premium quality antifreeze coolant and distilled water are not covered by this warranty. DRL radiators require a correct proportion of quality coolant, which contains aluminum corrosion inhibitors in the formula and distilled water. All Corvette cooling systems must include a radiator pressure cap with the proper pressure rating.

Claims for internal damage of the engine, components, cosmetics, or user’s vehicle are not covered by this warranty. It is the responsibility of the product user to monitor engine operation and have proper detection devices installed to warn the user of overheating. Specific exemptions to this warranty include tube damage, tubes ballooning or bursting from excessive engine operating temperate or pressure, internal corrosion due to inadequate proportions of antifreeze/coolant, or damage to the radiator resulting from collision or service. DRL shall not be responsible for damages to its product or injury to persons using the product when improperly opening radiator pressure caps, burst hoses, etc. DRL shall not be responsible for injury or harm to persons or property caused by persons or vehicles using our products.

The purchaser’s remedy for breach of this warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of the part purchased. All products returned for warranty consideration must be returned to DRL with all transportation expenses prepaid. Upon receipt of the product, DRL will examine the product to determine the condition and validity of the claim. DRL reserves the right to repair or replace the product at our discretion. Expanded or ballooned tubes are the result of an over pressure condition and this is not covered under warranty.

Radiators which were damaged in shipping should immediately be reported to the shipping carrier as damaged, and claims of damage filed accordingly. Contact the transport carrier (UPS, truck line, etc.) for procedures in filing a damage claim with the carrier or their agent. Do not return a product damaged in shipping to Dewitts Radiator, LLC. Distilled water and premium antifreeze must be used with all aluminum radiators!

DeWitts 4139070A Radiator Fan Combo Review(s)

About DeWitts

History and information about DeWitts and their products.

Have you had the experience of steam pouring out of your car or maybe seen this happen to someone along the highway? Well you guessed it, a faulty radiator is the culprit and the team at DeWitts is here to make sure this never happens to your car. They realize that the radiator is an integral part of any car’s coolant system and this is especially true of a performance car that functions at top speeds. The friction that results from your car’s cacophony of moving parts is the miscreant in this case because friction results in excess heat energy. Lucky for you, this can all be avoided with a radiator from a reputable manufacturer and DeWitts fits the bill when it comes to a quality, dependable radiator.

Those owners who operate their cars at higher horsepower don’t have to worry because DeWitts understands heat load and they have test results on each radiator’s heat rejection and have published that rating comparing it to the factory unity. In the majority of cases DeWitts double row radiators are a 30% increase in heat rejection and that is no small gain and if you supplement this with an electric fan you can boost that number an additional 10%..You don’t have to worry about fit when it comes to a DeWitts radiator since they hold the official U. S. trademark for the term Direct Fit and this assures you that each and every DeWitts aluminum radiator is designed to specifically fit the listed application without the need for any modifications to your vehicle. As a bonus if you have a car that was manufactured after 1983 you will find that the DeWitts radiator are manufactured as double row radiators and consequently can hold one additional gallon of fluid over your factory installed radiator.

For those car aficionados who want even more cooling capability because of the demands of their particular driving situation the DeWitts radiators are available with 1.25 inch pipes providing approximately 10% additional cooling capability but remember a double row core, already on the radiator, is equal to a five row copper unit and is almost double the heat rejection of a single row aluminum unit. So you may find the 1.25 inch tubes totally unnecessary. An important thing to consider when choosing any product is where and how it is manufactured and you won’t go wrong with DeWitts because the aluminum radiators are made in the USA in Michigan where they can oversee 100% of the manufacturing process. They thought of quality of product first when they chose a CAB brazing furnace allowing them to produce a primo aluminum core second to none. Having fifteen years of experience building Direct Fit radiators beginning with Corvette radiators gives them a wealth of knowledge when it comes to product design and manufacturing. Give your high performance vehicle the cooling it needs for your high performance driving with a DeWitts radiator and see what a difference a cool engine can mean.

Other Popular Parts

Below are other popular parts other customers have purchased for their Chevrolet Corvette.