• BBK 1763 - Throttle Body Twin 62mm Mustang GT V8; 2005-2010

    Brand: BBK

    BBK 1763 | Throttle Body Twin 62mm Mustang GT V8; 2005-2010

    * Images may be a representation and may not reflect the actual product.

    Have a question about this part?

    Contact Us


Product Description

BBK 1763 - BBK Throttle Body Twin 62mm Mustang GT V8; 2005-2010.

Manufacturer Part Number: 1763

BBK Throttle Body Twin 62mm Mustang GT V8, BBK Throttle Body Twin 62mm Mustang GT V8 - OPEN BOX

BBK Throttle Body Twin 62mm Mustang GT V8, BBK Throttle Body Twin 62mm Mustang GT V8 - OPEN BOX

Finally, a throttle body for the hot new 3V Mustang! The brand new, BBK Twin 62mm Throttle body is a direct bolt on to your 2005-2010 Mustang and requires no computer reprogramming! Just bolt it up and enjoy the new power you have put on your drive by wire pony. Expect to see gains of around 10-15HP from this simple bolt-on. This BBK brand throttle body reuses the stock factory throttle body gasket.This BBK throttle body does not require retuning your Mustangs computer.

BBK Throttle Body Twin 62mm Mustang GT V8, BBK Throttle Body Twin 62mm Mustang GT V8 - OPEN BOX

IMAGES: Images may be a representation and may not reflect the actual product.

Often Purchased Together

About BBK

History and information about BBK and their products.

BBK has been designing high performance parts for cars since 1988 at unsurpassed quality levels. All their parts are directly bolted on with no modifications and are covered by full BBK manufacturer’s warranty. BBK exhaust headers feature the latest computerized machining equipment resulting in superior OEM quality products.

SSI Intake Manifolds . CNC Series Exhaust Headers, CNC Series Extracter X pipes & H Pipes, SpeedWare Stainless Exhaust Components, Power+Plus Throttle Bodies, Fuel Pumps & Fuel Regulators, Cold Air Induction Intake Kits, Performance Underdrive Pulley Kits. LMPerformance also carries BBK air filters, bushings and end links, caster/camber plates, clutch adjuster kits, cold air kits, fuel pumps, fuel rails and fuel regulators, gaskets, headers and intake manifolds, as well as pipes, springs and throttle bodies.

Policies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.

IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.

TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.

BBK 1763 Throttle Bodie Review(s)

BBK Brand Review(s)

Reviews for BBK's Other products are show below.

BBK Camaro V8 1-3/4 Full-length Headers W/high-flow Cats (polished Ceramic); 2010-2015
3 Stars ceramic peels

By: SS demon
Ownership: 1 month - 1 year
Header install was a breeze, took 2.5 hrs with a lift. No fitment issues, everything went on perfectly. However these headers are already rusted in 7 months, disappointed when going to car shows. Couldn't beat the price, probably will spring for stainless works headers and jet hot them on the next go around. Also get O2 extensions with inserts and you won't have check engine light problems, headers have been on for 8th with no drivable issues.

Current Mods:
Bbk long tubes, spohn sway bars, vararam cold air intake, r1concepts cross drilled and slotted rotors, stainless works muffler deletes, hero headlights.

BBK Camaro V8 1-3/4 Full-length Headers W/high-flow Cats (polished Ceramic); 2010-2015
5 Stars 5th gen camaro SS bbk longtubes

By: Demon Hawk
Ownership: 1 month - 1 year
I found this product to be a very easy install taking a total of 3.5hrs with a lift. The headers came with all new header bolts which was also very helpful. I also installed extensions with inserts for the rear O2 sensors to keep the vehicle from running too lean and causing a CEL. So far after 3,000 miles no CEL and vehicle runs great, sounds great. Totally recommend these Headers to anyone.

Current Mods:
BBK longtube headers with Cats, Stainless works Muffler Deletes.

BBK GM LS-1 Camaro 1-3/4 Full-Length Headers no CATS (Chrome) V8; 1998-2002
5 Stars BBK LT Headers and ORY

By: JP
Ownership: 1 day - 1 week
The bbk long tubes fit perfect. You couldn''t ask for anything better. They look good and put out an excellent sound. Not sure what the dyno proven results will be yet, but will soon. Im sure it will be something great. The y pipe fit okay, but didn''t exactly reach to my existing cat-back which is a magnaflow. This usually happens mixing two different things together. I had to weld the y-pipe to that part of it. It wasn''t a big deal for me. Just a heads up for someone for future reference. With all that being said I would still give bbk a 10 out of 10 for these headers and y-pipe.

Current Mods:
BBK LTs & ORY, slp air lid, smooth bellow, ls7 clutch kit, Dyno tuned before headers and y. 2002 Trans Am WS-6 six speed

BBK Camaro V8 1-3/4 SHORTY TUNED LENGTH HEADERS (304 STAINLESS); 2010-2015
5 Stars Review of BBK 304SS Shorty Headers

By: Tom LS3 Camaro SS/RS
Ownership: 1 month - 1 year
I found the BBK shorty headers (1.75" Primary) tuned length to be of excellent quality, easy to install and noticed an improvement in my car's performance (2011 Chevrolet Camaro Convertible LS3/6Spd Man Trans with #2SS and RS Packages. I'm also running BBK's catback system 2.75" with X-pipe also in 304 Stainless Steel (my axleback exhaust is a Flowmaster Hushpower 3" in 409SS). The combo of the BBK headers, BBK catback, Flowmaster axleback, Diablblosport Tune and SLP Blackwing (full Blackwing) makes my car feel like it has gained at a minimum 35-40 HP & Torque at the rear wheels. Stock LS3 rated 426HP/420TQ (365RWHP/367RWTq), now should be putting down 400-405 (or a bit more possibly)RWHP/RWTq. I recommend the BBK (and the other) products listed here.

Current Mods:
SLP Blackwing C.I.A., SLP Billet Short-throw Shifter, SLP Front license plate holder; Diablosport Predator Tuner, BBB catback 2&3/4 w/x-pipe, Flowmaster 3" hushpower axleback< BMR Sub-frame connectors & tunnel brace. More planned.

BBK Ford Mustang GT 4.6-2V Throttle Body & Plenum 78mm V8; 1996-2004
5 Stars AWSOME!!

By: MyP71Vic
Ownership: 1 week - 1 month
I actually installed this on my 2000 Crown Vic Police Interceptor which has the same 4.6L and it is awsome! The installation was a breeze just had to mess with the air tube to make it fit but it really does give a nice airflow and boost the power a decent amount!

Current Mods:
80mm MAF, 1/2 TB Spacer for the 78mm BBK, Ford Racing Intake Manifold.

BBK Cold Air Induction System Cobra, Bullit V8; 1996-1998
5 Stars BBK INDUCTION KIT 97 SVT COBRA

By: Rev Hard
Ownership: 1 week - 1 month
This BBK Air Induction kit is Awsome! It comes complete with every thing you need (EXCEPT) The MAS Air Housing & Sensor, For the Price of this Prodcut I would have to say I should have Bought it Years ago. The only hard part of installing it was getting the Evac system removed from under the finder so place the Air Filter were it need to be. Thanks BBK

Current Mods:
This was the first Mod. I have installed the Cobra was all Original until now

BBK Camaro V6 Cold Air Induction System (chrome); 2010-2011
5 Stars junk

By: 2011 cam
Ownership: 1 day - 1 week
Lost 16 horse on the chassis dyno. What more do I need to say.

Current Mods:
1300

BBK 58mm Throttle Body LT1; 1994-1996
5 Stars but-o-meter

By: skippy.
Ownership: 1 week - 1 month
I have had the tb on for over a week now and let me tell you guys wow! The horse power is defiantly there. The but-o-meter is happy. My 5th gear went from 50 to 65mph, to 60 to 90 mph. 4th went from 40 to 55, to 50 to 65! I installed it myself took some man handling but it fits like a glove. gasket seals perfect no problems. I made a picture clip and video of it going on. Love this product! http://www.youtube.com/watch?v=4EQn6DCiDe0

Current Mods:
Ram air hood, Throttle body bypass, Hypertec programer, cat delete, BBK 58mm throttle body, vet short shifter.

BBK GM LS-1 Camaro 1-3/4 Full-Length Headers no CATS (Chrome) V8; 1998-2002
4 Stars bbk headers

By: Anonymous
Ownership: 1 day - 1 week
Quick install good fit and gives great exhaust note just need to get a 3" coupler.

Current Mods:
headers

BBK Shorty 1 3/4 Headers Camaro LS1 (Polished Ceramic) V8; 2001-2002
5 Stars Nice!!

By: Alvin B
Ownership: 1 day - 1 week
Headers fit great and I could easily feel the difference in the 3,000 RPM range. They help to wake up the LS1

Current Mods:
CAI, Bellows, LID, MagnaFlow Catback, ORY, BBK Shorty

BBK Camaro V8 Cold Air Induction System (chrome); 2010-2013
5 Stars BBK INTAKE

By: IEATSVT
Ownership: 1 week - 1 month
Swapped my SLP Blackwing kit for this one. PROVEN on the DYNO for 7HP more. Awesome improvement for a pretty cheap price

Current Mods:
2010 SS CAMARO/ SLP HEADERS & EXHAUST/ SLP TUNER/ 4.10 GEARS/ STREET SLICKS

BBK Shorty Headers 1 5/8 inch Mustang 3.8L V6 (chrome); 1999-2004
5 Stars AWESOME

By: Anonymous
Ownership: 1 day - 1 week
OK as promised, I'm posting again after the install. I put these headers on this weekend with the rest of my exhaust system, and they are great! Perfect fit, AMAZING SOUND and the chrome looks great in the engine bay. I had no problems installing the headers, and they came with all installation hardware needed (bolts and gaskets). I also bought a can of white High Temp paint and coated the inside of the headers to prevent the chrome from the "rainbow" effect from the heat. My sister did that on the headers on her 69 camaro, and it works like a charm. I am more than satisfied with this product and the service I received from LMperformance. Thanks!!!

Current Mods:
American Muscle CAI, Bosch Plantinum +4 Spark Plugs, BBK Chrome Shorty Headers, Pypes X-Pipe with Cats, Flowmaster American Thunder Catback with Super 40 Series Mufflers

BBK POWER-PLUS 75MM 4.6L/5.4L 2V F-Series & Expedition; 1997-2003
4 Stars beter pickup

By: ford fan
Ownership: 1 month - 1 year
i would tell all of you to give it a tri its worth the money for shore

Current Mods:
i have a 99 expo with a supercharged 5.4L and the 75mm was a great adition

BBK Shorty Headers 1 5/8 inch Mustang 3.8L V6 (chrome); 1999-2004
5 Stars Good Service

By: Anonymous
Ownership: 1 day - 1 week
I ordered these headers along with the rest of my exhaust parts to put a complete dual exhaust system on my 99 v6. I got the parts in a timely fashion without any problems. Thanks for the quick shipping. Everything i need for the installation is in the package (new header gaskets, new bolts to bolt the headers on and new studs to connect the exhaust pipes). I'll be installing these headers this weekend along with a pypes catted x-pipe and flowmaster catback, and I can't wait to hear how it sounds. I'll post again after the install.

Current Mods:
American Muscle CAI, Bosch Plantinum +4 Spark Plugs, Full Exhaust being installed this weekend.

BBK Corvette C6 Cold Air Induction; 2005-2007
5 Stars save your money

By: JJ
Ownership: 0 - 1 day
i have purchased this intake with hopes that everything is going to go smooth. Well it didn''t the intake does not fit properly, it''s to big therefore the hood does not close properly, basically it''s over sized. i do not recommand anyone buying this item it just does not fit properlly, very poor design. I have returned it

Current Mods:
i have purchased this intake with hopes that everything is going to go smooth. Well it didn''t the intake does not fit properly, it''s to big therefore the hood does not close properly, basically it''s over sized. i do not recommand anyone buying this item it just does not fit properlly, very poor design. I have returned it

BBK Cold Air Induction Mustang GT (Titanium Powder Coat) V8; 2005-2009
5 Stars bbk cold air

By: Anonymous
Ownership: 1 month - 1 year
this is a nice mod,,as they say nice mod for the buck sounds great and more pony to push vary pleased with this product,,,good job bbk

Current Mods:
bbk cold air,,bbk pully set,,bbk short tube headers,,

Other Popular Parts

Recently Viewed