The Driveshaft Shop GTOPL-2 | GTO / G8 / Camaro / CTS-V conversion plate; 2004-2006

  • Pontiac GTO The Driveshaft Shop Conversion Plate
  • Pontiac GTO The Driveshaft Shop Conversion Plate
  • The Driveshaft Shop GTOPL-2 |  GTO / G8 / Camaro / CTS-V conversion plate; 2004-2006

    • * Usually Ships within 0 - 48 hours
    • Catalog #: 00659632
    • MPN: GTOPL-2
    • $149.99
    • + Add to Wish List

Product Description

The Driveshaft Shop GTOPL-2 - The Driveshaft Shop GTO / G8 / Camaro / CTS-V conversion plate; 2004-2006.

This conversion plate from The Driveshaft Shop at LMPerformance, will convert the rear 3 finger output to a spicer 1350 flange (3-2-119). There has been talk about plates like this causing vibrations, but DSS was able to confirm during stringent recent tests on a 9500rpm balancer that this is not only NOT causing vibrations, but the pin that this centers on is a direct centerline to the differential and transmission. This part is precision machined to carry that centerline flawlessly. Recent testing also found yokes with u-bolts and straps to create vibrations (9 major brands were tested, ever see a NASCAR ball to check runout ?) So if your putting a GTO rear in a hot rod this will make it an easy one... Fits GTO rear only.

Product Summary

The Driveshaft Shop GTOPL-2 | GTO / G8 / Camaro / CTS-V conversion plate; 2004-2006 Details and Purchase Information.
The Driveshaft Shop
Manufactured by: The Driveshaft Shop
Model: GTOPL-2
Product ID: 659632
Price: $149.99
Condition: New

Search Terms: The Driveshaft Shop 2004-2014 GTO / G8 / Camaro / CTS-V conversion plate GTOPL-2 dss-camaro-conversion-plate-GTOPL-2 GTOPL2 GTOPL2 The Drivetrain & Transmission Conversion Plate Pontiac GTO GTOPL2 2004 2005 2006

The Driveshaft Shop GTOPL-2 Conversion Plate Review(s)

About The Driveshaft Shop

History and information about The Driveshaft Shop and their products.

The Driveshaft Shop has been designing driveshafts used in racecars and street performance cars for over 30 years. Driveshafts can be ordered in carbon fiber, Aluminum and Chromoly. LMPerformance carries all of the Driveshaft Shop products including driveshafts, conversion plates, axles, input shafts and more.

The Driveshaft Shop dynamically balances every drive shaft at over 9000 RPMs for unsurpassable dependability and we want to let you know why that is so important. Most balancing machines depend on sensors that determine the “weight centerline” of the spun part and this then gives the information that is needed to determine how much weight is then necessary to bring it with the required tolerance. However, if the shaft can be spun at the actual speed it will be used at it can provide significantly more information affording the opportunity to make a much more precise correction, and an additional significant advantage is that The Driveshaft Shop’s high-speed balancer can analyze parameters such as joint tolerance, tube flex, harmonic resonance, slip yoke instability and more, all extremely important and helpful in making the drive shaft as precise as possible. Many balancing machines only spin anywhere from four hundred to three thousand RPM but this new balancer that The Driveshaft Shop had custom made is exceptional because of its ability to dynamically balance at over nine thousand RPM’s. Now let’s talk about the differential and we are sure all you racing aficionados know this but some of you enthusiasts new to racing my want a little help. When your car corners the inner wheel travels a shorter distance than the other wheel and if your car did not have a differential the result would be either an inner wheel that rotates much too fast or the outer wheel would drag and that is certainly not something you want because then your car would be extremely difficult to handle, and you would experience tire damage or possible drive train failure. But what if you are in the performance arena and don’t want cornering difficulties such as the inside wheel spinning while hard on the gas in your powerful Corvette, Charger or 300C then you need a limited differential and you will find one by The Driveshaft Shop below that is of inimitable quality, and because it allows for a limited amount of clutch slip between each axle side you will experience relatively small differences in rotation when you take that corner and will prevent dangerous wheel spin. See all transmission products by The Driveshaft Shop including driveshafts, axles, and conversion plates on our website and let us help you get your drive shaft in perfect working order at a competitive price and with free shipping.

Other Popular Parts

Below are other popular parts other customers have purchased for their Pontiac GTO.

Recently Viewed

Your recently viewed car parts.

* Shipping/Product Notes: Please note FREE Shipping refers to shipping within the contiguous continental US. All other locations extra. If your order will be delayed, you will be notified via email the estimated shipping date. Please note that we try to have every picture of every part number however some pictures may be representations. If you have any questions please call or contact us for clarification. For Example: Parts such as our clutch kit stages use the same pictures.