Pro-M GM-753L | GM 75mm 3 Pin Mass Air Meter Camaro V8; 1994-2002

  • Chevrolet Camaro Pro-M Mass Airflow Sensor
  • Chevrolet Camaro Pro-M Mass Airflow Sensor
  • Pro-M GM-753L |  GM 75mm 3 Pin Mass Air Meter Camaro V8; 1994-2002

    • Catalog #: 0018683
    • MPN: GM-753L
    • Your Price: $329.00
      Regularly: $379.00 (Save $50.00)
    • + Add to Wish List

Product Description

Pro-M GM-753L - Pro-M GM 75mm 3 Pin Mass Air Meter Camaro V8; 1994-2002.

Pro-M mass air meters for GM applications appear to be exactly the same product that you see advertised elsewhere. All aftermarket manufactures (Pro-M included) start with the same production GM meter. The ends are removed from the production meters, then the center section (the part that contains the electronics) is machined to allow more air flow, and then new larger diameter ends are installed. The result is an assembly that flows more air, but in the process, the calibration of the meter is thrown way off. Other manufacturers simply ship them with the calibration off. Every Pro-M meter is calibrated to match the original meter's calibration. These meters can simply be installed in place of your original meter, with no modification to the computer, allowing instant results, with none of the hassles associated with aftermarket computer tuning. This is a feature you will only find in a Pro-M meter.


  • 94-00 Corvette
  • 94-02 Camaro
  • 94-02 Firebird
  • 2004 GTO
  • 96-98 Full-Size TruckIncludes Tahoe, Yukon, Suburban, Full-Size Van, Commercial Chassis
  • 99-00 Full-Size Truck - (with 3 Pin MAF)Includes Tahoe, Yukon, Suburban, Full-Size Van, Commercial Chassis

Product Summary

Pro-M GM-753L | GM 75mm 3 Pin Mass Air Meter Camaro V8; 1994-2002 Details and Purchase Information.
Manufactured by: Pro-M
Model: GM-753L
Product ID: 18683
Price: $329.00
Condition: New

Search Terms: Pro-M GM 75mm 3 Pin Mass Air Meter 1994-02 Camaro V8 GM-753L GM753L GM753L Pro-M Induction Mass Airflow Sensors Chevrolet Camaro GM753L 1994 1995 1996 1997 1998 1999 2000 2001 2002

Pro-M GM-753L Mass Airflow Sensor Review(s)

About Pro-M

History and information about Pro-M and their products.

Pro-M mass air meters are available in various sizes, shapes, and styles, as both direct bolt-in replacements, and in universal designs, to maximize your engine's horsepower potential, by allowing your engine to breathe to its fullest potential. Each mass air meter is individually calibrated on one of our in-house flow benches specific to your particular application, and fuel injector size, eliminating the need for time consuming and expensive dyno tuning. Others make claims, but only Pro-M Racing possesses both the intellectual and physical properties necessary to calibrate your mass air meter to within two percent of what the OEM considers the perfect baseline. (In comparison, OEM meters are typically held to within 6 percent). Quite simply, despite their claims, no other company even knows what this baseline is. For those who choose to have their vehicle professionally tuned, all of our meters are supplied with a flow data sheet. The flow data sheet provides extremely accurate and invaluable information for tuners, greatly reducing the time needed to properly tune your vehicle. All Pro-M mass air meters can be installed in a matter of minutes, and will provide immediate results.

In case you didn’t know, the Mass Air Flow Sensor in your car has a very important job to do and that is it sends your car’s engine a signal with measurements that aid in the calculation of fuel delivery and spark timing – hard to believe isn’t it. It is able to accomplish this by means of an electrically charged wire that can tell how much air is entering the air intake and then in turn it creates an electrical voltage, transmits it to your car’s phenomenal computer system and as a consequence the spark timing is adjusted as well as fuel delivery and spark advance. If you find your car’s engine stalling, rough when it is at idle or you are using much more gas then you used to then you could have a faulty Mass Air Flow Sensor, or if you have added aftermarket performance parts to your car these may have resulted in additional air flow and your car’s factory Mass Air Flow Sensor may not be accurate creating problems in performance and fuel economy. If it is time to replace your car’s hot wire type sensor from the factory with an aftermarket high performance mass air meter consider the ones designed and manufactured by Pro-M Racing, the company that has the performance engine in mind when they go to the drawing board. Innovations like the Pro-M 92mm Universal High Flow Mass Air Meter V8 on the LMPERFORMANCE web site with its bell mouth design and non- protruding sampling element and its 360 degree sampling design, a truly a remarkable piece of engineering and it is available in any calibration so it has wide spread use. Also from Pro-M Racing for your Cobra, Mustang or Ford Truck the flanged air meter with its billet aluminum fabrication, welded construction and anodization it will outperform and outlast any competitive product and be much more eye appealing, a very important attribute if you are showing your car. Peruse these and all of the other outstanding Pro-M Racing meters on the LMPERFORMANCE web site and get your upgrade at a competitive price.

Often Purchased Together

These are parts that other customers have purchased while purchasing the product on this page.

Other Popular Parts

Below are other popular parts other customers have purchased for their Chevrolet Camaro.

Recently Viewed

Your recently viewed car parts.

* Shipping/Product Notes: Please note FREE Shipping refers to shipping within the contiguous continental US. All other locations extra. If your order will be delayed, you will be notified via email the estimated shipping date. Please note that we try to have every picture of every part number however some pictures may be representations. If you have any questions please call or contact us for clarification. For Example: Parts such as our clutch kit stages use the same pictures.