SKU: 8057-10
Synergy Mfg 8057-10 - Synergy Jeep JK/JL Bump Stop Spacer Kit 2-4 Inch - Pair; 2007-2022.
Synergy Jeep JK/JL Bump Stop Spacer Kit (2-4 Inch) - Pair
Synergys Snap-Lock Bump Stop Spacer System is a set of stacking bump stop spacers adjustable from 2-4 inches of bump stop spacer height. These can be used on the front or rear of the vehicle. When upgrading to larger tires, the distance between the tire and fender decreases and will translate into interference at full suspension bump travel. Bump stop spacers are designed to match the tire size and lift height to keep this interference from occurring. Using fiber reinforced composite and Snap-Lock Technology, bump stop spacer height can be added or subtracted without loosening or removing any hardware. With available bump stop heights from 2-4 inches to choose from, bump stop spacing can be dialed in to match your lift and tire size without having to purchase multiple spacers to find the right one.Spacers are able to fit through the coils of some front springs, eliminating the need to remove the springs to change bump stop spacing.
Fits:
- 18+ Jeep Wrangler JL/JLU
- 07-18 Jeep Wrangler JK/JKU
- 2020 Jeep Gladiator
Features:
- Molded and machined from fiber reinforced composite
- Bump stop spacing can be changed on the vehicle without removal of any hardware
- Bump stop spacers bolt on to the axle and provide 2, 3, or 4 inches of extra limitation for larger tires or shocks
- 100 percent bolt on components assures an easy, trouble free installation with the use of basic hand tools
IMAGES: Images may be a representation and may not reflect the actual product.
History and information about Synergy Mfg and their products.
Now that you are an owner of an off-road vehicle you are probably looking for ways to improve your vehicle's performance particularly when it comes to your suspension system. Well, Synergy Manufacturing has been in the market of doing just that since 2005. And you can be assured that most of their components are made right here in the USA and that the suspension components are designed from scratch to give you world class performance.
Synergy thought of everything for your suspension system with features like progressive coil springs, adjustable track bars, shock relocations kits, adjustable upper and lower control arms and dual durometer bushings to name a few.
But Synergy Manufacturing didn’t stop with suspension systems but went on to design heavy duty steering components with features like a drag link that bolts directly into your factory mounts, tie rods that are over forty percent stronger than your stock rods and more. The axle upgrades, skid plates and other exceptional components can serve to provide your off-road vehicle with that much desired off-road performance and give it a great look as well.
The adjustable ball joint kit is designed with longevity in mind and is meant to last the life of your vehicle and to stop that sloppy steering, and it comes with a limited lifetime warranty. And you can be assured that rigorous testing is done on all components because they are tested on trails like the extreme Hammers and Rubicon trails that challenge even the toughest coil springs, shock mounts and control arms to the test.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Search Terms: 805710 8057-10 syn8057-10 syn805710 Synergy Mfg Synergy Jeep JK/JL Bump Stop Spacer Kit (2-4 Inch) - Pair (24 Synergy Jeep JK JL Bump Stop Spacer Kit (2-4 Inch) - Pair Wrangler Bump Stops Suspension SYN Bump Stops 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022
Order Now, Pay Later Learn More.
