Scion Amerihood

<< FIRST < PREV ...   NEXT > LAST >>
  • Scion Amerihood
  • SELECT CATEGORY
  • Amerihood PRODUCT LINE(S)
  • SELECT BRAND
  • Scion Amerihood
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Amerihood

Amerihood

About Amerihood

When a company is recognized as the foremost designers and distributors of Fibre-reinforced plastic composite body kits and other products like fenders, spoilers and Carbon Fiber hoods you can be sure you are getting a quality product. AMERIHOOD, a division of AIT, is just such a company. Having proven their value in the aftermarket performance industry since their inception in June 2002 they deserve the recognition they have achieved because of their dedication to precise fitment and excellence in quality of product. The AMERIHOOD racing line is celebrated for its sui generis quality and specificity of fit and as a consequence is used in D1, Formula Drift, NOPI Drift, Red Line Time Attack, Super Lap Battle, SCCA, and NASA races as well as in minor track events. The company is able to accomplish all of this in their 25,000 sq. ft. warehouse located in Chino, California assuring you of a commitment to quality by one of the largest aftermarket performance body parts distributors. Attention to detail and quality of product are paramount and have led to the success of AMERIHOOD in the industry both for racing and every day use.

About Amerihood

One example of an AMERIHOOD primo quality product is the Ram Air Hood for your Chevrolet Silverado HD 3500 featured on the LMPERFORMANCE web site. Because ram air utilizes a forward facing scoop you will notice that when you are driving at speed the air blowing over your car's hood is forced into the scoops thus causing a reduction in the effort needed to pull air into your Silverado's engine. The Ram Air Hood serves to pull cooler air in and forces more air into the intake and is ideally suited as a replacement for your stock Silverado hood allowing direct cold intake air to work perfectly with your performance air intake systems. And there is no need to concern yourself with durability and style because the AMERIHOOD ram air hood is exceptional with its material of hand laid high quality fiberglass and resin along with a gel coat finish on both top and under side to make for easier prep before painting. And at no additional cost to you there is a functional Ram Air tunnel built into every hood and you can use your factory hinges and latch for easy installation. And if that is not enough it utilizes two vented heat extractor vents that serve to draw hot air from your Silverado engine bay.

Whether you are in the market for an aftermarket performance hood for aesthetic reasons or to improve your engine’s performance you won’t go wrong with a Ram Air Hood from AMERIHOOD for both style and durability and backed by a company you can trust. Let the team at LMPERFORMANCE help you get the look and performance you crave for your Chevrolet Silverado at a competitive price and with free shipping as well. See what a difference a Ram Air Hood will make when you hit top speed with your Silverado on the track or cruising along the highway.

Amerihood Review(s):

Reviews for Amerihood's products are show below.

Amerihood Chevrolet Silverado 2500HD 2005-2007 Type-E Style Functional Ram Air Hood
4 Stars GOOD LOOKIN' & GOOD FUNCTION...hard to fit though, Date: 8/23/2017

By: AD
Ownership: 1 week - 1 month
Purchased this Amerihood RAM Air intake, heat exhausting hood for my Chevy diesel truck. It cost me another $450 to have painted, but it sure looks great on my truck! I drove it and have seen excellent results with keeping the temp down having this cold air intake hood directing outside air directly to the air filter, and the vents allowing hot air to escape out the top of the hood. I have noticed that the hood shakes more than my original steel hood when driving, especially on bumpy roads, so I'm hoping it will last and not break with the extra movement. The only problem I've had so far is that installing it was a ROYAL PAIN IN THE BEHIND! I expected, with the &quot;bolt on&quot; using factory holes it would be a quick job, but what I expected to take 15 mins took over 4 hours! I had to loosen and readjust the placement 1/8&quot; at a time over and over to get it so the hood would fit correctly and also to close. Infact, I had to take a cut off wheel and cut my AirAide air filter bracket down 1&quot; lower so the hood would even close at all. So, when you purchase this, just be prepared for a big project installing it. I love how it looks though and how it works, as long as it will last for years! (I was concerned to see the warranty is only 90 days and wouldn't have bought it had I seen that ahead of time. I'd expect at least a ONE Year warranty on a good product.)

Current Mods:
Amerihood for 2005 Chevy Duramax LLY


Scion

These are some of the items you can find at LMPerformance for your Scion

The Team at LMPerformance has amassed a compilation of parts for your Scion BRZ, IQ, XA, FR-S, FRS, TC, XA/XB, XD, TS and XB at an affordable price and inestimable quality. Parts like the r2013-2016 Scion FR-S Subaru BRZ DURAFLEX 86-R Front Bumper Cover by Extreme Dimensions with DURAFLEX, a cutting-edge line of aerodynamic parts fabricated with an aggregation of fiberglass, plastic, and flex resins to obtain sui generis features that give DURAFLEX aero parts outstanding durability. DURAFLEX aero comes in a total package with a black primer finish for easy painting, high quality mesh grille where applicable, hardware kit, and general installation guide. For a total performance upgrade to your FR-S, FRS, TC, a, XB and XD give consideration to a Full Body Kit by DURAFLEX with parts numbering anywhere from 16 to 4 so that you can do as much or as little as you need for aerodynamic performance or just for great looks.

Your street and race car deserves the best and Spec, the preeminent Manufacturer of street high performance and racing clutches and flywheels is available for your Scion in all five stages and should be selected based on your driving needs and desire for longevity with particular attention paid to racing situations that are much more demanding on clutches in general.

For the Scion owner who wants nothing but the best there is the KONI Sport Suspension Kit for unparalleled road-holding in an extraordinary range of kits. The KONI Sport Suspension Kits consist of matching KONI Sport Shocks and KONI Sport Springs and these kits will give the car absolutely resplendent road-holding qualities and the looks of a genuine sports car.

To upgrade your stock exhaust system in your Scion FR-S you have available to you the inimitable BORLA brand Rear Section Exhaust that is guaranteed to provide top-of-the-line quality, unbelievable sound and performance gains. The Rear Section Exhaust System comes with a pipe diameter of 2.5 inches into the muffler and dual 2" out, tip size 4.5" and single round rolled angle-cut phantom, tip number 95, exit single split rear exit and it is installed by welding. The Scion FR-S cat-back system from BORLA has a single 2.5" pipe into and dual 2" pipe leading out with a tip size of 4.25 inches and single round rolled angle-cut phantom tip number 37 and a single split rear exit. For the TC there is the Rear Section that increases flow and reduces weight with a 2.25" pipe and oversized oval tip.

The MISHIMOTO Aluminum Radiator for your TC is the right choice when upgrading or replacing your Scion radiator because of its light weight and extraordinary quality it is perfect for the everyday driver and the racing enthusiast. Manufactured to provide 25% more cooling capacity they are designed to keep your engine its coolest with a 100 percent brazed aluminum core, tig welding, a magnetic drain plug to trap debris and a radiator cap that is rated at 19 lbs. to prevent leaks.

The INVIDIA exhaust for your FR-S comes with single layer stainless steel or titanium tips and with rolled stainless steel or titanium tips and is also available in a Racing Single Outlet Full Titanium Cat-Back Exhaust. The INVIDIA Titanium C-Back Exhaust for your FR-S are completely constructed of titanium for an ultra lightweight application and are direct bolt application - just what you need for performance on the track.

^