Plymouth Vertical Doors

<< FIRST < PREV ...   NEXT > LAST >>
  • Plymouth Vertical Doors
  • SELECT CATEGORY
  • Vertical Doors PRODUCT LINE(S)
  • SELECT BRAND
  • Plymouth Vertical Doors
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Vertical Doors

Vertical Doors

About Vertical Doors

Vertical Doors, Inc., kits are proudly made and patented in the United States and are bolt-on kits made specifically for your particular vehicle. We only manufacture the best kits, best quality, best customer service, strongest kits, and most affordable for the quality. Our line-up includes all the major vehicle manufactures.

This system is everything you need for a successful, reliable and cost effective conversion in a minimum amount of time.

Not only are our kit easy to install but they are also easy to operate, basically open your door like normal until it stops, at a predetermined position and then just raised your door up until it stops. You also have the option of not raising the door since unlike most Lambo Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, etc, imitators; our Vertical Doors, Inc., kits will allow you to get in and out without having to raise your doors.

This Authentic Vertical Doors, Inc. kit will enable you to easily modify your vehicle and attain the look you desire!

If you like the iconoclastic look of the LAMBROGHINI and want to capture some of its unique look by emulating the vertical door identified with this luxury car then you have come to the right spot because VERTICAL DOORS, INC. and LMPEFORMANCE can help you do that with the VERTICAL DOOR kit. The very first vertical door made its appearance on the Alfa Romeo CARABO concept car and not on the LAMBROGHINI at all and was the result of the car designer’s desire to not only enhance the design of the car but also to improve the car’s exceedingly poor rear visibility by allowing the driver to lift the door and lean out in order to see behind. The first actual production car to feature these doors was, in fact, the LAMBROGHINI whose wide chassis design created problems similar to those of the CARABO concept car. The doors became a trademark of the LAMBROGHINI and thus the doors are quite often called by their colloquial name of “LAMBO DOORS”. Now you know a little history behind the classy door style and it is time to make a decision regarding the kit it will take to accomplish your goal and since today quite a few aftermarket companies specialize in manufacturing conversion kits that enable you to get that LAMBO DOOR look and performance we want to give you the information you need to decide on VERTICAL DOORS, INC. First, of course, is the fact that they have United States patenting on those extremely important hinges and the hinges are manufactured under United States guidelines, and then there is the fact that VERTICAL DOORS, INC uses stronger steel, heat treats all pivot and strike points, uses primo quality German made shocks, provides detailed instructions for most cars, and has earned an outstanding reputation after being in business for over ten years. Just remember that you are not replacing your car’s factory door but just the front door hinges and that in order to complete the installation you will need to remove your front fenders and in some instances the car’s front bumper or fascia and quite often minor trimming to your front bumper is necessary in order to make a clearance for your new hinges as well as modifications being needed in the wiring harness. You will find VERTICAL DOOR kits for every make of car from an Acura to a Volkswagen and a potpourri of makes in between on the LMPERFORMANCE web site at a competitive price and with free shipping.

Newest Vertical Doors Car Parts for Your Plymouth

Plymouth

These are some of the items you can find at LMPerformance for your Plymouth

Crossover pipes, designed to balance the exhaust flow on dual systems, can diminish uneven exhaust flow from the two banks of engine cylinders by giving exhaust pulses a pathway to travel between the two sides of the dual exhaust system thus reducing backpressure by preventing an exhaust build-up on either side of the system. The quintessential manufacturer of crossover pipes, PYPES, produces pipes with high quality, exceptional design and performance. They are a certified winner when it comes to bumping up the horsepower of your Plymouth daily driver or race car. The Driveshaft Tunnel X crossovers fit a variety of classic cars that are prone to limited ground clearance. There’s no skimping on materials here because all crossovers are constructed of 409 stainless (304 polished stainless option) and include dual 409 stainless reinforcement plates at the welds where they are needed most. All pipes are mandrel bent allowing for the maximum flow of exhaust gasses, which boosts acceleration. The Stainless material resists corrosion and extends the life of your X-pipe.

Owning a manual-shift car can be lots of fun but all of that on-off-on clutch-shifting action does eventually wearing them out and letting it go too far can cause the flywheel to get eaten up. If your Plymouth is experiencing one of these symptoms it might be time for a new clutch or a clutch repair. You might see your Plymouth clutch disengaging faster than usual. acceleration might be slower or you might smell a burning clutch, or the clutch might not be disengaging when the pedal is pushed or the pedal may be stiff and won’t disengage the clutch. Or better yet you might just want a performance clutch for your off the road or racing Plymouth. LMPerformance can help you with either, a repair or improvement, by offering you the quintessential SPEC clutch. SPEC is a consummate manufacturer of street high performance and racing clutches and flywheels. Featuring Clutch Kits From street kit Stage 1, 2, 2+, 3, and 3+ to Race Kits Stage 4 and 5. And now the SPEC Super Twin with TQ ratings of over 1500 FT TQ. And if you don't need a full kit you can purchase the SPEC Clutch Pressure Plate or Clutch Disk separately and we also offer a line of SPEC flywheels for your Plymouth that are manufactured and developed for specific driving environments and recommended based on application.

If you want to boost the rate of exhaust flow out of your Plymouth Prowler engine and give it a covetable look check out the inimitable STAINLESS WORKS headers. Stainless Works SHORTY Headers with Hi-Flow Cats or Off-Road Pipes and Long Tube Headers are custom built headers fabricated with top quality stainless steel and are factory connect for simple installation.

The interior of a car that is parked outdoors on a hot sunny day can reach temperatures of up to 194 °F and that is hot by any standard but you can protect the inside of your car and help decrease the internal temperature by installing a TECHSHADE from the prestigious WEATHERTECH. Specially fitted for your Plymouth vehicle it can be easily removed and stored by rolling it up and securing it with the Hook & Loop strap.

Better vehicle stability, improved control, and possibly a smoother ride can result by upgrading the shocks on your Plymouth vehicle. This is particularly true in situations where there is an aggrandized level of ground variation -- such as racing or off road driving. If you are using your Plymouth vehicle for these purposes, then you require shocks that are built for incontrovertibly greater impact dampening. KONI has been the preeminent manufacturer of performance and adjustable shocks in the world and they introduced the industry's very first adjustable shock absorber, electronic drag racing shocks and today's patented FSD (Frequency Selective Damping) street shocks. KONI shocks are made from the zenithal quality raw materials and machined to the highest tolerances and this quality is represented not only by KONI'S long heritage in motor sports but has also afforded KONI the ability to offer a limited lifetime warranty on many of its shocks. KONI makes a broad range of product lines to deliver upgraded performance in handling and ride quality to cars and trucks driven on paved roads. Find the shock you need for your Plymouth vehicle and see the difference a KONI shock can make.

^