Nissan Amerihood

<< FIRST < PREV ...   NEXT > LAST >>
  • Nissan Amerihood
  • SELECT CATEGORY
  • Amerihood PRODUCT LINE(S)
  • SELECT BRAND
  • Nissan Amerihood
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Amerihood

Amerihood

About Amerihood

When a company is recognized as the foremost designers and distributors of Fibre-reinforced plastic composite body kits and other products like fenders, spoilers and Carbon Fiber hoods you can be sure you are getting a quality product. AMERIHOOD, a division of AIT, is just such a company. Having proven their value in the aftermarket performance industry since their inception in June 2002 they deserve the recognition they have achieved because of their dedication to precise fitment and excellence in quality of product. The AMERIHOOD racing line is celebrated for its sui generis quality and specificity of fit and as a consequence is used in D1, Formula Drift, NOPI Drift, Red Line Time Attack, Super Lap Battle, SCCA, and NASA races as well as in minor track events. The company is able to accomplish all of this in their 25,000 sq. ft. warehouse located in Chino, California assuring you of a commitment to quality by one of the largest aftermarket performance body parts distributors. Attention to detail and quality of product are paramount and have led to the success of AMERIHOOD in the industry both for racing and every day use.

About Amerihood

One example of an AMERIHOOD primo quality product is the Ram Air Hood for your Chevrolet Silverado HD 3500 featured on the LMPERFORMANCE web site. Because ram air utilizes a forward facing scoop you will notice that when you are driving at speed the air blowing over your car's hood is forced into the scoops thus causing a reduction in the effort needed to pull air into your Silverado's engine. The Ram Air Hood serves to pull cooler air in and forces more air into the intake and is ideally suited as a replacement for your stock Silverado hood allowing direct cold intake air to work perfectly with your performance air intake systems. And there is no need to concern yourself with durability and style because the AMERIHOOD ram air hood is exceptional with its material of hand laid high quality fiberglass and resin along with a gel coat finish on both top and under side to make for easier prep before painting. And at no additional cost to you there is a functional Ram Air tunnel built into every hood and you can use your factory hinges and latch for easy installation. And if that is not enough it utilizes two vented heat extractor vents that serve to draw hot air from your Silverado engine bay.

Whether you are in the market for an aftermarket performance hood for aesthetic reasons or to improve your engine’s performance you won’t go wrong with a Ram Air Hood from AMERIHOOD for both style and durability and backed by a company you can trust. Let the team at LMPERFORMANCE help you get the look and performance you crave for your Chevrolet Silverado at a competitive price and with free shipping as well. See what a difference a Ram Air Hood will make when you hit top speed with your Silverado on the track or cruising along the highway.

Amerihood Review(s):

Reviews for Amerihood's products are show below.

Amerihood Chevrolet Silverado 2500HD 2005-2007 Type-E Style Functional Ram Air Hood
4 Stars GOOD LOOKIN' & GOOD FUNCTION...hard to fit though, Date: 8/23/2017

By: AD
Ownership: 1 week - 1 month
Purchased this Amerihood RAM Air intake, heat exhausting hood for my Chevy diesel truck. It cost me another $450 to have painted, but it sure looks great on my truck! I drove it and have seen excellent results with keeping the temp down having this cold air intake hood directing outside air directly to the air filter, and the vents allowing hot air to escape out the top of the hood. I have noticed that the hood shakes more than my original steel hood when driving, especially on bumpy roads, so I'm hoping it will last and not break with the extra movement. The only problem I've had so far is that installing it was a ROYAL PAIN IN THE BEHIND! I expected, with the &quot;bolt on&quot; using factory holes it would be a quick job, but what I expected to take 15 mins took over 4 hours! I had to loosen and readjust the placement 1/8&quot; at a time over and over to get it so the hood would fit correctly and also to close. Infact, I had to take a cut off wheel and cut my AirAide air filter bracket down 1&quot; lower so the hood would even close at all. So, when you purchase this, just be prepared for a big project installing it. I love how it looks though and how it works, as long as it will last for years! (I was concerned to see the warranty is only 90 days and wouldn't have bought it had I seen that ahead of time. I'd expect at least a ONE Year warranty on a good product.)

Current Mods:
Amerihood for 2005 Chevy Duramax LLY


Nissan

These are some of the items you can find at LMPerformance for your Nissan

LMPerformance carries parts for 60 Nissan models and yours is one of them whether it be one of the fastest Nissan's ever produced like the 200SX, the 240SX, or the Pulsar, or one of the most popular like the ALTAMA, Pathfinder or Frontier. For your Nissan ALTIMA, 370Z and 350Z there are The EIBACH PRO-KIT performance springs, the perfect answer for most frequently-driven street cars to dramatically improve both a vehicle's performance and appearance. PRO-KIT precisely lowers your car's center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. Or the EIBACH SPORTLINE springs for your Nissan 200SX, 350Z or your 370Z the extreme-performance spring set created for the extreme enthusiast - the one who craves a race-car attitude for maximum street performance - with the lowest possible drop, but with the exceptional ride quality you expect from EIBACH. Or the B&G lowering springs that are wound from high tensile Chromium-Silicone wire purchased from Europe’s premium mines and cold wound on CNC coilers; heat treated and shot peened for longevity; and finished with phosphate treatment and a baked on resin powder coating for a hard corrosion resistant shell. Just use our 24 hour online service to find the right EIBACH or B&G springs for your Nissan model.

Your Nissan Skyline, SENTRA, Maxima, 240SX, 300Z and original equipment radiator only channels away about 30 percent of the heat generated by your engine but efficiently managing the heat effectively will benefit your Nissan by making it more efficient in terms of horsepower and will result in better use of your performance modifications, Aftermarket MISHIMOTO radiators expand cooling capacity and are designed to outperform your original radiator. The diameter of the cooling tubes is the determining factor in greater efficiency and copper/brass cooling tubes must be small because the material isn't rigid enough to support wider-diameter tubes but the strength provided with Aluminum allows for broader cooling tubes, providing greater surface area, which increases heat transfer capacity. The MISHIMOTO brand is an outstanding cooling system affording you a cooler engine and lifetime warranty and they are application specific and can directly fit on your Nissan,

The Original Equipment headers for your Nissan are ordinarily designed to take up a minimum of space and aftermarket performance headers are installed in order to boost the rate of exhaust flow out of your Nissan engine. The tubes on aftermarket performance headers are generally bigger in diameter than the runners on a manifold and they are mandrel bent to assure the opening of the pipe stays the same radius where it curves. American Racing Headers are engineered and constructed using 304 Stainless Steel and are fabricated with precision cut, 3/8-inch warp-resistant and leak-free stainless steel flanges. The primary tubes are individualized for your specific engine output to prevent any concession being afforded to a tight engine bay. And for your 350Z there is the inimitable Billy Boat Exhausts with exhaust systems that look good as well as sound good. B&B products are polished to a showroom finish and the exhaust systems are available with several different tip styles. Need a dual exhaust for your 350Z then try INVIDIA Gemini, designed for primarily dual exhaust vehicles. As with all INVIDIA Exhausts, the Gemini cat-back exhaust systems combine are exceptional in quality and design and the performance is outstanding. The INVIDIA Gemini exhaust system, with its high quality mandrel-bent stainless steel tubing, robot-TIG welding and polished finish are sure to meet your Nissan needs. The Invidia Gemini muffler gives your Nissan a deep and toned exhaust sound without being excessively loud. The INVIDIA Gemini exhaust systems are of a Cat-Back design which replace all the piping from underneath your vehicle after the catalytic converter. Most INVIDIA Gemini cat-back exhausts are available in 3 tip styles: rolled stainless steel tips, rolled titanium tips, straight titanium tips. And for your 370Z there is DC Sports Headers of T304SS stainless and/or T409SS ceramic coated for protection and finish, plus the Intake is high flow, open element.

Body kits make your Nissan 350Z and 370Z visually more aggressive - a plus when it comes to drawing attention on the street, or even in a parking lot. DURAFLEX aerodynamics, a miscellany of fiberglass, plastic, and flex resins creating sui generis features that provide an extraordinarily durable product that ships well and can withstand abuse. For better road handling and race Performance the addition of body parts by DURAFLEX are a proven winner when it comes to improve aerodynamics.

^