Mazda K&N Filter

<< FIRST < PREV

Page: 1 of 3

  • Mazda K&N Filter
  • SELECT CATEGORY
  • K&N Filter PRODUCT LINE(S)
  • SELECT BRAND
  • Mazda K&N Filter
SORT:
VIEW:
<< FIRST < PREV PAGE: 1 / 3
K&N Filter

K&N Filter

About K&N Filter

K&N AIR INTAKES, THE ULTIMATE WEAPON IN THE HORSEPOWER WARS Most of our High-Flow Air Intakes can be purchased for less than $350. On the 2003 Ford Mustang SVT®, we actually achieved a 30 horsepower increase. Even our typical air intake gains are in the range of 8 to 16 horsepower. To send an average V-8 down the road at 55 mph, it takes about 17 horsepower. Considering this, you begin to realize just how much of a difference our intakes can make when you step on the gas. We’re proud of these intakes because after you bolt one on, you’ll know something’s different…VERY DIFFERENT!

GET THE MOST OUT OF YOUR CAR OR TRUCK Most people are aware that our High-Flow Air Filter can increase horsepower over a traditional disposable air filter. An air filter change alone however, cannot eliminate other types of air restriction built into the vehicle at the factory. These can be found in the size of the air box and the air path running from the air box to the engine. That’s where air intakes rule the road. They completely replace the factory airflow assembly including the filter, air box and air path. More and more people are discovering the monster power available from a well-engineered air intake and we sell over 200,000 air intakes every year, so go ahead and wake the sleeping giant in your car.

GUARANTEED HORSEPOWER We will not sell an air intake that does not provide a measured increase in horsepower and torque (acceleration). Our air intakes are proven to increase horsepower and torque on a rear-wheel dynamometer (think treadmill for cars). These thoroughly engineered air intakes provide huge increases in power that a customer will definitely feel when they accelerate.

Product lines include: K&N Fuel Injection Kits, FIPK, K&N 77 Series High Flow Air Intakes, K&N Typhoon Air Intake Systems, K&N AirCharger, K&N 57i Air Induction Kits, K&N Cold Air Intake Filters, and Stock Replacement Air Filters.

Back as far as 1969 K&N ENGINEERING has been in the business of perfecting automobile filters and, in fact, they were the inventors of the high flow cotton air filer and they have been working ever since then to improve your car’s filter with a dedication to perfection of product and customer satisfaction. In the K&N facility in Riverside, California, they go about the task of researching and developing air filters and air intake systems and now have a potpourri of more than 5,000 products bearing their logo and; furthermore, the inimitable K & N products can be found in more than thirty countries around the world. There is a reason K & N assure you of their quality with a million mile warranty and the reason is their belief in the excellence of their product and because of their place in the aftermarket performance industry as the world’s foremost manufacturer of washable performance air filters and air intake systems.

If you need more power, consider the gains that can be achieved by installing a K&N intake kit on your car and weigh that against the cost of this relatively inexpensive modification and I think you will agree that it is worth it for the resultant improvement in your car’s performance. And you don’t need to worry that a new K&N intake kit will give your car’s engine too much air because every engine is designed to draw in only a particular volume of air and this depends on your car’s bore, stoke and cylinders so this is not a problem. Consider K & N’s history of success and its unparalleled place in the annals of aftermarket performance air filters and air intake systems when deciding on a new air filter or, better yet, a new and improved air intake system and then peruse the multiplicity of products available on the LMPERFORMANCE web site and find the one that will make a difference in your vehicle the minute it is installed. Take advantage of the more than fifty years of experience K & N has and use it to your benefit and let LMPERFORMANCE help you get the right part at the right price.

About K&N Filter

K&N Filter Review(s):

Reviews for K&N Filter's products are show below.

K&N Air Filter For Ford F250 Super Duty 6.4l 08-10
5 Stars Great Product , Date: 8/23/2016

By: Anonymous
Ownership: 1 week - 1 month
works great better throttle response, truck doesn''t regen. as often

Current Mods:
none


K&N Camaro 2010-15 V8 Series AirCharger Intake Kit
5 Stars Great Product, Date: 7/2/2012

By: Anonymous
Ownership: 1 week - 1 month
Excellent, gives great throttle response!

Current Mods:
Stock other than K&N for now!


K&N Fuel Injection Performance Kit (fipk) For Trailblazer Ss V8-6.0l; 2006
5 Stars K&N cold air, Date: 4/6/2011

By: trailblazerSS06
Ownership: 1 week - 1 month
once i installed the cold air it was a nice and day difference the sound is amazing, i would deff recommend this to anyone that wants a good looking great sound intake

Current Mods:
K&N cold air and flowmaster exhaust.


K&N Dodge Challenger RT 2011-16 5.7L Aircharger Kit
5 Stars K&N on an 09 Challenger R/T, Date: 11/22/2010

By: Tinneric
Ownership: 1 day - 1 week
Great product, the only issue is that the instructions could be much clearer, I am very mechanically inclined, but the instructions are too generic

Current Mods:
Flomaster Series Super 40 Cat Back Preditor Tuner


K&N Air Box FIPK II Replacement Kit 2000-05 Impala / Monte Carlo 3.8L
5 Stars WOW!, Date: 11/2/2010

By: Teluride
Ownership: 1 month - 1 year
The K&N Cold air intake added what seemed to be at least 20 to 30 HP. With a very substantial increase in torque. If i was anyone wanting to start adding performance parts to my 2000 Monte Carlo I would definately start with this intake.It actually releases a very surprising amount of power from 0 to any speed you want to go to all the way to top end. It is truly an amazing difference. like a different car. BUY IT!

Current Mods:
right now all i have is the K&N cold air intake


K&N Typhoon Air Intake System For Camaro SS 6.2L V8 2010-2014
5 Stars Great Intake, Date: 6/29/2010

By: Willy
Ownership: 1 month - 1 year
Excellent intake system, easy to install. Only issue was fixing threads for plastic insert. Noticeable performance increase, and it looks great too.

Current Mods:
K&N Typhoon Intake, Flowmaster American Thunder cat-back exhaust.


K&N FIPK II Pontiac GTO V8 2005-06
5 Stars FIPK II Cold Air Kit for GTO, Date: 6/16/2010

By: Buddy
Ownership: 1 week - 1 month
The K&N air intake was easy to install on my 2006 GTO. I can tell the difference in power gains, the unit is a bi noisy, you can ear the air sucked in while i get on it before i shift gears. Overall great product and good price.

Current Mods:
Stock Pontiac GTO, just added cold air intake, Disk Brakes Australia (DBA) slotted and drilled rotors with Hawk perfomance pads.


K&N Aircharger Kit For Cadillac Chevy GMC 4.8L 5.3L 6.0L 2009-12
5 Stars 2009 Chevy Tahoe, Date: 5/6/2010

By: Kyle
Ownership: 1 day - 1 week
Excellent overall experience, great price, great product and very fast shipping.

Current Mods:
K&N Air Charger and Superchips Programer


K&N Typhoon Intake Systems For Cobalt 2005-2006 (All) 2.0L
5 Stars K&N intake. . ., Date: 2/25/2010

By: Y2KWS6
Ownership: 0 - 1 day
I ordered this for a friend and installed it for his cobalt. Really opens up the supercharger and its a worth the money but what a *itch to put on hahah. But all in all its a good buy for a cobalt.

Current Mods:
Not my car


K&N Typhoon Intake Systems For Cobalt 2005-2006 (All) 2.0L
5 Stars 05''-08'' Cobalt SS Cold Air Intake, Date: 5/10/2009

By: Anonymous
Ownership: 1 week - 1 month
This intake was simple to install and sounds great. It really accentuates the superchargers whine, looks great to. Overall its a simple performance upgrade.

Current Mods:
K&N Typhoon Intake, SLP Loudmouth II Catback System


K&N 63 Series Aircharger Intake Kit For Dodge Dakota 2007-08 4.7L
5 Stars Awesome part!, Date: 4/23/2009

By: EMAXX
Ownership: 1 day - 1 week
I installed this K&N 63 series CAI today. The throttle response is better and the sound is unbelievably amazing! It makes the engine so much louder. The instructions are a tiny bit different if you have a 2008 dakota 4.7L. I had to trim the breather hose about 2 inches, or else it had a small kink. The IAT sensor was a bit of a pain to get in but it fits snug. On the instructions, it shows the "hemi hat" has 2 bolts you need to unscrew, there is only one bolt and a plastic clip that i had to press with a screw driver to get the hemi hat off. The only thing that was kind of a pain was putting the trim on the heat shield, the area where the intake pipe sits was kind of hard to route it on there. i did have to make one hole a tiny bit bigger on one of the brackets because the bolt that had to go through wouldn't fit, 30 seconds with a dremel and it worked like a charm. I cant comment on gas mileage increase just yet, its hard to keep my foot off the pedal! it just sounds so cool! quick little tip on the install, i was looking at the hardware bag and seen i had a extra clamp, it goes on the intake tube where the support for the tube is connected to the AC mount. The instructions did not clearly show that, but the exploded view did. Install time was probably about 45 mins. I definitely give this product a 5/5 rating.

Current Mods:
Goerlich Xlerator Muffler, K&K 63 series CAI


K&N Dodge Challenger RT 2011-16 5.7L Aircharger Kit
4 Stars K&N cold air intake, Date: 3/24/2009

By: Cellar Dweller
Ownership: 1 week - 1 month
The K&N is a good product but the fit and finish of the airbox could have been better.

Current Mods:
K&N and Diablo tuner, waiting on my SLP exhaust


K&N 63 Series Aircharger Intake Kit For GM Full Size Trucks & SUVs 4.8L/5.3L/6.2L
5 Stars K&N CAI, Date: 1/30/2009

By: skmoore22
Ownership: 0 - 1 day
This is the first MOD I did to my 2008 Sierra Denali. All I can say is WOW. Very easy install and made a big change in how the truck runs. What is most inpressive to me is the gas mileage increase. It also rev's better and the low growl when you are getting on the gas is alsome. I highly recomend this MOD. It is well worth the money. LMP is great to deal with and look forward to dealing with them again. Fast shipping as well.

Current Mods:
K&N CAI


K&N Dodge Challenger SRT-8 Typhoon Intake System - Polished
5 Stars Typhoon Intake, Date: 12/9/2008

By: Phil
Ownership: 1 week - 1 month
This is my third K&N Intake on my muscle cars. This one was fast and really smooth to install. Even better then my other ones. The polished intake tube looks awesome under the hood. This is a good start to you mod path. My next step is Corsa Exhaust followed by an SMS Supercharger.

Current Mods:
This is the first of many mods to my 2009 Challenger...


K&N FIPK II Pontiac GTO V8 2004 ONLY (57-3044)
5 Stars K&N Cold Air Intake, Date: 12/4/2008

By: Jim in Hawaii
Ownership: 1 month - 1 year
Noticeable increase in horsepower. Gas mileage increased ~2-3MPG Installation time was ~2 hours

Current Mods:
SLP Catback Exhaust


K&N FIPK: Fuel Injection Performance Kit II 1998-02 Camaro 57-3022-2 V8
5 Stars Added HP, Date: 8/21/2008

By: Silver Trans AM
Ownership: 1 week - 1 month
I was using the stock air kit for my Trans Am. It had a lot of hesitation, now I am using this product and the car runs 10 times better. I can feel the difference in the motor already. Amazing prices and fast shipping LMPerformance!!!

Current Mods:
Flowmaster Exhaust, K & N FIPK Kit II


K&N Air Box FIPK II Replacement Kit 2000-05 Impala / Monte Carlo 3.8L
5 Stars k n air intake system, Date: 7/18/2008

By: jamesallen84
Ownership: 1 day - 1 week
noticible power cool sounding worth every penny

Current Mods:
dynomax exhaust


K&N Fuel Injection Performance Kit II 2005 FORD Mustang GT 4.6L V8
5 Stars the best in this kit, Date: 7/2/2008

By: n silent world
Ownership: 1 month - 1 year
i had installed this cold air kit on my car.i have had seen a very good performance from it and iam happy with it.it gave me a distance about 3 car-space starting from rolling 40KM to 170KM compared with an other stock mustang manual gear.Another thing about this kit:it works with no tuning, better results after tuning,it is a strong competitor beside other brands with its quality and performance.

Current Mods:
stock 2005 mustang gt manual gear with catback only


K&N FIPK: Fuel Injection Performance Kit II 1998-02 Camaro 57-3022-2 V8
5 Stars No More Hesitation, Date: 6/27/2008

By: Black Z28
Ownership: 1 month - 1 year
Used to have a different stock style cai, had lots of hesitation at lower speeds until i tried this. it has almost twice the surface area of the stock type filter box setup. no more hesitation car runs 10 times better !!! Awesome price and fast shipping as always LMP...

Current Mods:
AFR Heads, G5x3 cam, Jet Hot Long Tubes, Mac Cat Back, LS6 intake, Dyno 420RWHP


Mazda

These are some of the items you can find at LMPerformance for your Mazda

If you are thinking about racing your Mazda take into consideration the fact that the addition of air dams, skirts, rear spoilers, ridges and diffusers results in the managing of airflow around the car resulting in a greater amount of down force and lower drag all totaling up to increasing your level of performance. If you simply want to make your Mazda look awesome then those factors are not as important. Choosing a Body Part or Kit for your Mazda for aesthetic reasons or because you want to improve the aerodynamics for racing can be a challenge but LMPerformance can help with that by offering you DURAFLEX products. The nonpareil manufacturer, DURAFLEX , has developed an outstanding product for your Mazda by marrying three products, fiberglass, plastic, and flex resins, to obtain sui generis features that give the aero parts a much higher durability rate than an ordinary fiberglass product and they added primary coating for painting ease. For the Mazda 3, Mazda 6, Miata/MX-5, MX-6, PROTEGE, RX-7, RX-8, consider a Full Body Kit that comes in a variety of pieces for the ultimate in appearance and performance improvement. Don't need a full body kit then how about Bumper Covers, Fenders, Hoods, Rear Wings or Side Skirts for your Mazda 3 or RX-8 or Rear Lip Under Spoiler Air Dam, Roof Wing Spoiler, or Fender Flares for your RX-8 from the inimitable DURAFLEX with the same exceptional quality as the Full Body Kit.

A working set of shocks propitiously lessens the wear on your suspension, wheels and tires and provides the additional benefits of better vehicle stability, improved control, and in some cases, a smoother ride. Koni, the preeminent manufacturer of performance shocks in the world knows this and as a result developed a potpourri of shocks to meet your needs whether it be everyday driving or in situations requiring greater impact dampening - such as racing or off road driving, For your Mazda Miata/MX-5, Mazda MAZDASPEED 3, and Mazda 3 there is the Street Orange Shock, a totally new and individually tailored and engineered shock that gives your car that Koni sports feel with improved handling and less roll. To replace the factory shocks on your Mazda Miata/MX-5, RX-8, RX-7, Mazda MAZDASPEED 6 , Mazda MAZDASPEED 3, CX-5, Mazda 6, and Mazda 3 scrutinize the Sport Yellow Shock which accommodates Sporting Drivers focusing on road holding and handling and the ability to be used with spring kits to lower a vehicle up to 35mm. And the FSD Gold shock absorbers for your Mazda MAZDASPEED 3, Mazda CX-5, Mazda 6, Mazda 5, and Mazda 3, a smart suspension system adjusting automatically to road conditions as well as driving style. Even better for your Mazda Miata/MX-5, MAZDASPEED 3, Mazda 5, Mazda 3, the KONI Sport Suspension Kits for the sporting motorist who wants nothing but the very best in road-holding. The Sport Suspension Kits consist of matching KONI Sport Shocks and KONI Sport Springs affording your car absolutely superb road-holding qualities and the looks of a real sports car. Then there is the STR.T Kit from KONI comprised of KONI STR.T. shock absorbers and custom-made lowering springs from the company H&R for your Mazda Miata/MX-5, MAZDASPEED 3, and Mazda 3. Both KONI and H&R have years of experience in technological developments for motor racing in both the Formula! or DTM. As a result of the symbiosis between H&R's lowering springs and KONI'S STR.T shocks drivers receive a suspension kit from the factory perfectly balanced to suit their vehicle thus unpleasant pitch and rolling movements are reduced to a minimum. The KONI Mazda 3 FSD lowering kit for your 2004-2009 car comes complete with FSD shock absorbers, allowing you to change the damping force level in relation to the frequency of movement solving the conflict between comfort and handling present in conventional dampers, and a matched set of EIBACH Pro Kit Springs to give your Mazda a lower, more aggressive ride.

The Team at LMPerformance knows you want to protect your investment in your Mazda and consequently they provide for a wealth of products designed by the eminent manufacturer WEATHERTECH for your interior and exterior of your Mazda. The WEATHERTECH LAMPGARDS are designed to specifically fit your B Series Truck, Mazda 3, Mazda 5, Mazda 2, 626, Miata/MX-5, MILLENIA, MPV, MX-6, PROTEGE, Protege5, RX-8 and Tribute headlamps to protect them against road hazards. The WEATHERTECH Sunroof Wind Deflectors for your CX-7, CX-9, Mazda 2, MPV, Outlander, RX-8, and Tribute lessen wind noise inside your car and WEATHERTECH Side Window Deflectors for your Mazda B Series Truck, Mazda 3, Mazda 6, CX-5, 626, PROTEGE, RX-8, Tribute, MILLENIA, MPV and Navajo let you keep your windows cracked in inclement weather. Protect your Mazda B- Series Truck, CX-9, FAMILIA S-Wagon, Mazda 2, Mazda 3, Miata/MX5, MPV, Navajo and Tribute from the elements by installing WEATHERTECH All-Weather Floor Mats to protect your carpets from water, road salt, mud and sand. And yet more great products to protect your Mazda CX-5, CX-7, CX-9, Mazda 2, Mazda 3, Mazda 5, Mazda 6, Miata//MX-5 and Tribute interior from WEATHERTECH, the WEATHERTECH Floor Liner with Digital Fit that lines the interior carpet footwell protecting your expensive carpeting.

WEATHERTECH also furnishes Cargo Liners for you CX-5, CX-7, CX-9, Mazda 2, Mazda 3, Mazda 6, Miata//MX-5, MPV, Tribute and Navajo to afford complete trunk and cargo area protection. The TECHSHADE® by WEATHERTECH can keep your vehicle cool in the summer and help prevent frost build-up in the winter and it is custom fitted for your Mazda. Get the best price and free shipping on a TECHSHADE from LMPerformance for your Mazda 3, Mazda 6, CX-5, 626, PROTEGE, RX-8, Tribute, MILLENIA, MPV, Mazda 5, Mazda 2 Miata/MX-5, MX-6, Protege5, MX-3, MX-6 and RX-7 and see what a difference a TECHSHADE makes. Last but not least, the WEATHERTECH Sleek and low profile Easy-On Stone & Bug Deflector for your B-Series Truck, Mazda 2, Mazda 3, Mazda 5, Mazda 6, MPV and Tribute-great protection at a great price.

Every time you press the clutch in your Mazda the disc, pressure plate and flywheel are disengaged in order to shift gears and eventually resulting in the clutch failing or this may happen as a result of extensive use at the track. When this happens consider installing an aftermarket performance by one of the foremost manufacturers of street high performance and racing clutches and flywheels, SPEC, featuring Clutch Kits From street kit Stage 1, 2, 2+, 3, and 3+ to Race Kits Stage 4 and 5. For your Mazda RX-8 and Mazda RX-3 SPEC offers the Mini Twin assemblies, available in different clutch disc and flywheel materials, clamp loads, disc configurations and diameters recommended based on the type of usage the vehicle demands. For your 323, 626, Miata/MX-5, MX-3, MX-6, PROTEGE, RX-7, RX-8 and Tribute LMPerformance presents you with the SPEC billet flywheel, for specific driving environments and recommended based on how each car reacts to changes in rotational mass. If there is no need to replace the entire flywheel on your Miata/MX-5, MX-3, MX-6, PROTEGE, RX-7, RX-8, Mazda 3 or Mazda 6 we can supply you with the SPEC Aluminum Flywheel Friction Plate with the same extraordinary qualities as the entire flywheel. And if your clutch pressure plate needs replacing in your Mazda 1200, 1800, B Series Truck, Cosmo, DEMIO, GLC, Mazda 3, Mazda 6, Miata/MX-5, MX-3, MX-6, PROTEGE, RX-7, RX-8, Tribute, MPV, Navajo, R100, Rotary Truck, RX-2, RX-3, RX-4, and RX-7 peruse the list of SPEC parts on our web site to find the one that meets your qualifications and get a superlative part at a competitive price. For your 1200 1800, B Series Truck, Cosmo, DEMIO, GLC, Mazda 3, Mazda 6, 323, 626, Miata/MX-5, MX-3, MX-6, PROTEGE, RX-7, RX-8, Tribute, MPV, Navajo, R100, Rotary Truck, RX-2, RX-3, RX-4, and RX-7 allow LMPerformance to provide you with full clutch kits so that you can get the performance you deserve from your car.

^