GMC Pro-M

<< FIRST < PREV ...   NEXT > LAST >>
  • GMC Pro-M
  • SELECT CATEGORY
  • Pro-M PRODUCT LINE(S)
  • SELECT BRAND
  • GMC Pro-M
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Pro-M

Pro-M

About Pro-M

Pro-M mass air meters are available in various sizes, shapes, and styles, as both direct bolt-in replacements, and in universal designs, to maximize your engine's horsepower potential, by allowing your engine to breathe to its fullest potential. Each mass air meter is individually calibrated on one of our in-house flow benches specific to your particular application, and fuel injector size, eliminating the need for time consuming and expensive dyno tuning. Others make claims, but only Pro-M Racing possesses both the intellectual and physical properties necessary to calibrate your mass air meter to within two percent of what the OEM considers the perfect baseline. (In comparison, OEM meters are typically held to within 6 percent). Quite simply, despite their claims, no other company even knows what this baseline is. For those who choose to have their vehicle professionally tuned, all of our meters are supplied with a flow data sheet. The flow data sheet provides extremely accurate and invaluable information for tuners, greatly reducing the time needed to properly tune your vehicle. All Pro-M mass air meters can be installed in a matter of minutes, and will provide immediate results.

In case you didn’t know, the Mass Air Flow Sensor in your car has a very important job to do and that is it sends your car’s engine a signal with measurements that aid in the calculation of fuel delivery and spark timing – hard to believe isn’t it. It is able to accomplish this by means of an electrically charged wire that can tell how much air is entering the air intake and then in turn it creates an electrical voltage, transmits it to your car’s phenomenal computer system and as a consequence the spark timing is adjusted as well as fuel delivery and spark advance. If you find your car’s engine stalling, rough when it is at idle or you are using much more gas then you used to then you could have a faulty Mass Air Flow Sensor, or if you have added aftermarket performance parts to your car these may have resulted in additional air flow and your car’s factory Mass Air Flow Sensor may not be accurate creating problems in performance and fuel economy. If it is time to replace your car’s hot wire type sensor from the factory with an aftermarket high performance mass air meter consider the ones designed and manufactured by Pro-M Racing, the company that has the performance engine in mind when they go to the drawing board. Innovations like the Pro-M 92mm Universal High Flow Mass Air Meter V8 on the LMPERFORMANCE web site with its bell mouth design and non- protruding sampling element and its 360 degree sampling design, a truly a remarkable piece of engineering and it is available in any calibration so it has wide spread use. Also from Pro-M Racing for your Cobra, Mustang or Ford Truck the flanged air meter with its billet aluminum fabrication, welded construction and anodization it will outperform and outlast any competitive product and be much more eye appealing, a very important attribute if you are showing your car. Peruse these and all of the other outstanding Pro-M Racing meters on the LMPERFORMANCE web site and get your upgrade at a competitive price.

About Pro-M

GMC

These are some of the items you can find at LMPerformance for your GMC

For the performance look there is none better than RK Sport, recognized by DaimlerChrysler and GMC for Excellence in Design For their Body Kits and Hoods. RK Sport products are manufactured in the USA and are made of OEM quality urethane that guarantees long-lasting durability and optimum flexibility and for those who want a more affordable variant, RK SPORT offers body kits manufactured from hand-laid fiberglass. For your Sierra 1500 and the Sierra HD investigate the Ram Air Hood crafted from hi-temp, hand laid fiberglass for noteworthy strength and durability and featuring a functional Ram-Air Scoop that gives your truck a sportier look while delivering cool air directly over the factory air-box or the 1500 Ram Air Hood w/ Heat Extraction Vents for the 2014 and up. This hood comes with functional Ram Air Scoop and Heat Extraction Vents and utilizes stock hood hardware for uncomplicated installation and it comes with an Air Scoop, Heat Extraction Vents, is Hand Laid or Hi-Temp Fiberglass, Gel Coated in Gray and Ready for Prep and Paint.

Late Model Performance offers a range of possibilities for your iconic GMC car when it comes to exhausts thus affording you the option to choose what's best for your car depending on the model and year and your objective. Possibilities like exhaust systems from the prestigious BORLA brand whose exhausts are manufactured with aircraft-quality T-304 stainless steel inside and out and with gains of 7 to 10 percent in Horsepower and easy bolt-on installation. Bigger is not always better because big pipes can divest the exhaust of energy and additionally aggrandize the low frequencies culminating in uncomfortable roaring or droning sound. The BORLA exhaust system is less restrictive and preserves the velocity and high frequency so the dominant sound is behind the tailpipe and in addition to that BORLA’S sui generis Inter-cooled Tips have an idiosyncratic look that is sure to catch the eye. For your Canyon there is the Cat-Back S type. for the Envoy there is the Trailblazer. For the Sierra 1500 choose from one of many parts: the Cat-Back Exhaust S-Type Side Exit with Black Tip, the Cat-Back Touring, the Cat-Back Exhaust Split Rear Exit S-type and ATAK, the Cat-Back Split Rear Exit Touring, the Cat-Back S-Type Single Exit Dual, the Cat-Back ATAK Side Exit, Cat-Back S-Type, Cat-Back Touring and Touring Dual Behind Tires Side Exit, the Cat-Back ATAK, the Cat-Back S-Type Dual, Rear E, Cat-Back Single Side Exit, the Cat-Back S-Type Dual Rear, Cat-Back Touring Dual Out Back, and an exhaust system for your Silverado 2500 as well. For the Suburban/Avalanche/Yukon there is the Cat-Back Exhaust, for the Escalade Yukon Denali, the Cat-Back single Side Exit D, for the Tahoe/Yukon the side exit Twin Tips, for the Escalade/Denali the 6.0L V8 AWD AT 4DR 2002-04.

Another inestimable choice. CORSA. can equip your car with an inimitable exhaust system such as their cat back exhaust, axle back exhaust, sport system, tips, sport or touring system and pro series. The CORSA exhaust has an aggressive performance sound and are acoustically styled and engineered to match the make, model, and harmonics specific to your GMC and there is no drone with the CORSA exhaust system because the CORSA exhaust system uses RSC™ technology to eliminate "problem" frequencies that cause those annoying interior noises with cruising. CORSA'S patented non-restrictive Straight-through design reduces back pressure resulting in improved horsepower and torque and fuel economy. And best of all CORSA offers 3 levels of sound: X-TREME - their loudest offering; CORSA'S Sport systems for the in between; and the sport option for the least sound. For your Sierra there is the Cat-Back Single Side Exit, Dual Rear Exit, Dual Exhaust Kit, Sport Exhaust Dual Out the Rear, Sport Cat-Back, Silverado/Sierra Ext, CAM Short Bed or Crew Cab Sport, and others. There is a Cat-Back Exhaust for the Sierra/ Denali Cat-Back Short Bed Sport model, for the Extended Cab/Standard Bed, for the Crew Cab/Short Bed, among others. And in order to decrease air temperatures, and increase the volume of cold air entering the engine increasing Horsepower, Torque and overall engine performance consider a Cold Air Intake from CORSA for your Yukon and Denali. Featuring Donaldson Power Core Filtration Technology, CORSA air filters are warrantied up to 100,000 miles, flow better than traditional cellulose or cotton fiber filters and filter up to 99.99% of engine damaging dirt, dust and debris.

GMC Owners you now have an opportunity to take advantage of the 100% U.S. made 304 S/S header system designed by American Racing Headers. American Racing Headers' GM truck systems feature 3/8 thick laser cut flanges with hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats and your choice of 1-3/4 or 1-7/8 primaries. Systems are available for 6.0L 2WD or 4WD trucks and are guaranteed to deliver outstanding performance throughout the RPM range while providing a fit and finish that is second to none. Peruse the list of American Racing Headers available for your GMC truck and you will certainly find the right part at the right price and with free shipping.

With an inimitable reputation like the one Kooks has you won't go wrong in choosing one of their headers for your GMC vehicle because since 1962 they have been making the highest quality & best performing Custom Stainless Steel headers and exhaust systems. Kooks Long Tube Headers, Off-Road Y-Pipe, GREEN CATTED Y-Pipe, CATTED Y-Pipe, Off-Road Connection Pipes, Green CATTED Connection Pipes, and CATTED Connection Pipes for your GMC Truck will exceed the standard you have set for your GMC Truck because KOOKS prides itself on being the pioneers in the stainless steel header revolution and are the innovators in the exhaust industry as a whole. Choose the Kooks for your truck and see what a difference they make in performance and presentation.

Still more choices for your GMC with the iconic manufacturer Stainless Works whose product line of exhaust systems, headers, and off road pipes are made from only the finest EVERLAST 304 stainless steel, that is a little more expensive and premium quality so their products do not red-rust, ever. For your Silverado/Sierra there are the CATTED X-Pipe Performance Connection, Off Road X-Pipe Performance Connection, the Exhaust system with Y-Pipe exits in front of Passenger Rear and also Behind Passenger Rear Ti, the Exhaust System - True Duals for SW Headers Exits Dual Straight and also with exits in Front, with Exits Behind Passenger Rear Tire, Off-Road with Dual X-Pipe, Headers with High Flow Catalytic converters and True Dual XPipe, and with High Flow Catalytic Converters with Y-Pipe, 4wd headers, and others. Peruse the listings for Stainless Works and find the exhaust system or part you need for your GMC vehicle and you will find a quality part for your GMC needs.

And from the eminent manufacturer WEATHERTECH a variety of products to meet your every protective need. You can choose from the WEATHERTECH LAMPGARDS for your headlights on your GMC Denali, Sierra and other models. And also from WEATHERTECH, the TECHSHADE for your Sierra, Denali and other models, a perfect fit windshield and window sun shade that protects your GMC's interior by cooling it down in the summer and preventing frost build-up in the winter. And yet more great products from WEATHERTECH, the WEATHERTECH Floor Liner with Digital Fit for interior carpet protection designed using Digital laser measurements for a perfect fit. For even greater protection particularly in those winter climates try the WEATHERTECH All-Weather Floor Mats for your GMC that trap water, road salt, mud and sand. And for unquestionable vehicle protection from mud, rocks, stone chips, slush, and other road debris install the WEATHERTECH No-Drill Mud Flaps and the WEATHERTECH Sleek and low profile Easy-On Stone & Bug Deflector to provide excellent protection against stone chips and bug splats. The Roll Up Truck Bed Cover by WEATHERTECH for your GMC truck keeps cargo away from the elements when covered and stays out of the way for oversized cargo and it features the Auto Latch II automatic dual locking system that releases with one smooth downward pull and when used with a locked tailgate it provides excellent security. The Sunroof Wind Deflectors from WEATHERTECH for your GMC provides of in-cabin wind noise and the WEATHERTECH Side Window Deflectors are custom fit rain and debris guards. And last but not least, the WEATHERTECH Under-liner for your Sierra/Sierra Denali, a custom- fitted bed liner for pickup trucks that protects the truck bed underneath.

^