Ford Pro-M

<< FIRST < PREV ...   NEXT > LAST >>
  • Ford Pro-M
  • SELECT CATEGORY
  • Pro-M PRODUCT LINE(S)
  • SELECT BRAND
  • Ford Pro-M
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Pro-M

Pro-M

About Pro-M

Pro-M mass air meters are available in various sizes, shapes, and styles, as both direct bolt-in replacements, and in universal designs, to maximize your engine's horsepower potential, by allowing your engine to breathe to its fullest potential. Each mass air meter is individually calibrated on one of our in-house flow benches specific to your particular application, and fuel injector size, eliminating the need for time consuming and expensive dyno tuning. Others make claims, but only Pro-M Racing possesses both the intellectual and physical properties necessary to calibrate your mass air meter to within two percent of what the OEM considers the perfect baseline. (In comparison, OEM meters are typically held to within 6 percent). Quite simply, despite their claims, no other company even knows what this baseline is. For those who choose to have their vehicle professionally tuned, all of our meters are supplied with a flow data sheet. The flow data sheet provides extremely accurate and invaluable information for tuners, greatly reducing the time needed to properly tune your vehicle. All Pro-M mass air meters can be installed in a matter of minutes, and will provide immediate results.

In case you didn’t know, the Mass Air Flow Sensor in your car has a very important job to do and that is it sends your car’s engine a signal with measurements that aid in the calculation of fuel delivery and spark timing – hard to believe isn’t it. It is able to accomplish this by means of an electrically charged wire that can tell how much air is entering the air intake and then in turn it creates an electrical voltage, transmits it to your car’s phenomenal computer system and as a consequence the spark timing is adjusted as well as fuel delivery and spark advance. If you find your car’s engine stalling, rough when it is at idle or you are using much more gas then you used to then you could have a faulty Mass Air Flow Sensor, or if you have added aftermarket performance parts to your car these may have resulted in additional air flow and your car’s factory Mass Air Flow Sensor may not be accurate creating problems in performance and fuel economy. If it is time to replace your car’s hot wire type sensor from the factory with an aftermarket high performance mass air meter consider the ones designed and manufactured by Pro-M Racing, the company that has the performance engine in mind when they go to the drawing board. Innovations like the Pro-M 92mm Universal High Flow Mass Air Meter V8 on the LMPERFORMANCE web site with its bell mouth design and non- protruding sampling element and its 360 degree sampling design, a truly a remarkable piece of engineering and it is available in any calibration so it has wide spread use. Also from Pro-M Racing for your Cobra, Mustang or Ford Truck the flanged air meter with its billet aluminum fabrication, welded construction and anodization it will outperform and outlast any competitive product and be much more eye appealing, a very important attribute if you are showing your car. Peruse these and all of the other outstanding Pro-M Racing meters on the LMPERFORMANCE web site and get your upgrade at a competitive price.

About Pro-M

Ford

These are some of the items you can find at LMPerformance for your Ford

The Ford Motor Company, founded by Henry Ford on June 16, 1903 and based in Dearborn, Michigan, is an American automaker and the world's fifth largest automaker based on worldwide vehicle sales. It is one of the most profitable companies in the world, as well as being one of the few to survive the Great Depression and it is the largest family-controlled company in the world, having been in continuous family control for over 110 years. Ford now encompasses two brands: Ford and Lincoln. Late Model Performance can provide parts for 54 models of these American icons whether for street use, racing or off-road the answer to your quest is here.

The quintessential Mustang is well represented at Late Model Performance with a capacious array of parts for chassis and suspension, drive train and transmission, electronics and tuners, interior and exterior accessories, engine components, exhausts, gauges, lighting and induction parts. With body kits from Street Scene, 3dCarbon, RK Sport, Xenon, DURAFLEX, Couture, Carbon Creations the proud Mustang owner has a wide array of types of kits to choose from. The first thing you need to do is decide on the type of material whether fiberglass, polyurethane, ABS plastic, carbon fiber and composite. Polyurethane parts, like the ones manufactured by 3dCarbon, Xenon, Couture and RK Sport, are heavier than fiberglass, not necessarily ideal for racing if weight reduction is the main objective; plus, specialized preparation is required for paint to adhere correctly and it is susceptible to warping under extreme heat. It is; however, extremely flexible, virtually unbreakable and resistant to abrasion and temperature, oil, gasoline and other solvents. Carbon fiber parts, like the one available from the renowned manufacturer Carbon Creations, are ideal for racing because of their extreme strength and light weight; plus, they come clear-coated and don't need to be painted. The significant downside to carbon fiber is its higher cost of production resulting in a more expensive product. The composite creation by Extreme Dimensions, DURAFLEX, is an excellent choice because it is a unique blend of flex resins, fiberglass and plastic that is much stronger than fiberglass and has maximum flexibility; and additionally, it comes with a black primer finish for ease of painting.

Bumping up the horsepower on your Mustang just makes sense and Late Model Performance can help you do that with PYPES’ Exhaust systems, one of the paramount manufacturers of exhaust systems on the market for price and superior quality. PYPES' Mustang exhaust products are made of stainless steel materials for quality and durability and PYPES crossover pipes include dual 409 stainless reinforcement plates at the welds where they are needed most and all pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. With the conjunctive Crossover design it is not unusual to see an increase of anywhere between fifteen and twenty-five HP. A straight path is afforded by the Open Port Exhaust when it is uncapped; however, but you still benefits from the crossover technology and can expect between ten to fifteen HP. An options that is available on this system is the PYPES PYPE Bomb which utilizes a unique louvered core resonated dual wall 304 stainless tip to give you that American Muscle Car sound but not that popping associated with other lesser kits.

The Loudmouth Exhaust by SLP Performance has transformed many cars like the CAMARO SS into modern muscle machines and you can do that too for your Ford car whether it is a CAMARO or not. The exceptional properties; such as exceptional flow characteristics, lighter weight, ease of installation, stainless steel in its entirety and hand-polished dual wall tips in addition to its incredible sound make it an easy choice when thinking about a performance exhaust system.

Another undisputable winner, B&B (Billy Boat) produces a variety of exhaust systems for your Ford, whether it be a Crew Cab, Super Cab, F-150, Expedition or the Mustang. You can be assured of top quality and performance with a B&B exhaust since they are manufactured using the highest yet most practicable quality stainless steel and are engineered to exact specifications when mandrel bent so that you will have undisturbed air flow.

^