Ford Amerihood

<< FIRST < PREV

Page: 1 of 4

  • Ford Amerihood
  • SELECT CATEGORY
  • Amerihood PRODUCT LINE(S)
  • SELECT BRAND
  • Ford Amerihood
SORT:
VIEW:
<< FIRST < PREV PAGE: 1 / 4
Amerihood

Amerihood

About Amerihood

When a company is recognized as the foremost designers and distributors of Fibre-reinforced plastic composite body kits and other products like fenders, spoilers and Carbon Fiber hoods you can be sure you are getting a quality product. AMERIHOOD, a division of AIT, is just such a company. Having proven their value in the aftermarket performance industry since their inception in June 2002 they deserve the recognition they have achieved because of their dedication to precise fitment and excellence in quality of product. The AMERIHOOD racing line is celebrated for its sui generis quality and specificity of fit and as a consequence is used in D1, Formula Drift, NOPI Drift, Red Line Time Attack, Super Lap Battle, SCCA, and NASA races as well as in minor track events. The company is able to accomplish all of this in their 25,000 sq. ft. warehouse located in Chino, California assuring you of a commitment to quality by one of the largest aftermarket performance body parts distributors. Attention to detail and quality of product are paramount and have led to the success of AMERIHOOD in the industry both for racing and every day use.

About Amerihood

One example of an AMERIHOOD primo quality product is the Ram Air Hood for your Chevrolet Silverado HD 3500 featured on the LMPERFORMANCE web site. Because ram air utilizes a forward facing scoop you will notice that when you are driving at speed the air blowing over your car's hood is forced into the scoops thus causing a reduction in the effort needed to pull air into your Silverado's engine. The Ram Air Hood serves to pull cooler air in and forces more air into the intake and is ideally suited as a replacement for your stock Silverado hood allowing direct cold intake air to work perfectly with your performance air intake systems. And there is no need to concern yourself with durability and style because the AMERIHOOD ram air hood is exceptional with its material of hand laid high quality fiberglass and resin along with a gel coat finish on both top and under side to make for easier prep before painting. And at no additional cost to you there is a functional Ram Air tunnel built into every hood and you can use your factory hinges and latch for easy installation. And if that is not enough it utilizes two vented heat extractor vents that serve to draw hot air from your Silverado engine bay.

Whether you are in the market for an aftermarket performance hood for aesthetic reasons or to improve your engine’s performance you won’t go wrong with a Ram Air Hood from AMERIHOOD for both style and durability and backed by a company you can trust. Let the team at LMPERFORMANCE help you get the look and performance you crave for your Chevrolet Silverado at a competitive price and with free shipping as well. See what a difference a Ram Air Hood will make when you hit top speed with your Silverado on the track or cruising along the highway.

Amerihood Review(s):

Reviews for Amerihood's products are show below.

Amerihood Chevrolet Silverado 2500HD 2005-2007 Type-E Style Functional Ram Air Hood
4 Stars GOOD LOOKIN' & GOOD FUNCTION...hard to fit though, Date: 8/23/2017

By: AD
Ownership: 1 week - 1 month
Purchased this Amerihood RAM Air intake, heat exhausting hood for my Chevy diesel truck. It cost me another $450 to have painted, but it sure looks great on my truck! I drove it and have seen excellent results with keeping the temp down having this cold air intake hood directing outside air directly to the air filter, and the vents allowing hot air to escape out the top of the hood. I have noticed that the hood shakes more than my original steel hood when driving, especially on bumpy roads, so I'm hoping it will last and not break with the extra movement. The only problem I've had so far is that installing it was a ROYAL PAIN IN THE BEHIND! I expected, with the &quot;bolt on&quot; using factory holes it would be a quick job, but what I expected to take 15 mins took over 4 hours! I had to loosen and readjust the placement 1/8&quot; at a time over and over to get it so the hood would fit correctly and also to close. Infact, I had to take a cut off wheel and cut my AirAide air filter bracket down 1&quot; lower so the hood would even close at all. So, when you purchase this, just be prepared for a big project installing it. I love how it looks though and how it works, as long as it will last for years! (I was concerned to see the warranty is only 90 days and wouldn't have bought it had I seen that ahead of time. I'd expect at least a ONE Year warranty on a good product.)

Current Mods:
Amerihood for 2005 Chevy Duramax LLY


Ford

These are some of the items you can find at LMPerformance for your Ford

The Ford Motor Company, founded by Henry Ford on June 16, 1903 and based in Dearborn, Michigan, is an American automaker and the world's fifth largest automaker based on worldwide vehicle sales. It is one of the most profitable companies in the world, as well as being one of the few to survive the Great Depression and it is the largest family-controlled company in the world, having been in continuous family control for over 110 years. Ford now encompasses two brands: Ford and Lincoln. Late Model Performance can provide parts for 54 models of these American icons whether for street use, racing or off-road the answer to your quest is here.

The quintessential Mustang is well represented at Late Model Performance with a capacious array of parts for chassis and suspension, drive train and transmission, electronics and tuners, interior and exterior accessories, engine components, exhausts, gauges, lighting and induction parts. With body kits from Street Scene, 3dCarbon, RK Sport, Xenon, DURAFLEX, Couture, Carbon Creations the proud Mustang owner has a wide array of types of kits to choose from. The first thing you need to do is decide on the type of material whether fiberglass, polyurethane, ABS plastic, carbon fiber and composite. Polyurethane parts, like the ones manufactured by 3dCarbon, Xenon, Couture and RK Sport, are heavier than fiberglass, not necessarily ideal for racing if weight reduction is the main objective; plus, specialized preparation is required for paint to adhere correctly and it is susceptible to warping under extreme heat. It is; however, extremely flexible, virtually unbreakable and resistant to abrasion and temperature, oil, gasoline and other solvents. Carbon fiber parts, like the one available from the renowned manufacturer Carbon Creations, are ideal for racing because of their extreme strength and light weight; plus, they come clear-coated and don't need to be painted. The significant downside to carbon fiber is its higher cost of production resulting in a more expensive product. The composite creation by Extreme Dimensions, DURAFLEX, is an excellent choice because it is a unique blend of flex resins, fiberglass and plastic that is much stronger than fiberglass and has maximum flexibility; and additionally, it comes with a black primer finish for ease of painting.

Bumping up the horsepower on your Mustang just makes sense and Late Model Performance can help you do that with PYPES’ Exhaust systems, one of the paramount manufacturers of exhaust systems on the market for price and superior quality. PYPES' Mustang exhaust products are made of stainless steel materials for quality and durability and PYPES crossover pipes include dual 409 stainless reinforcement plates at the welds where they are needed most and all pipes are mandrel bent, to allow for the maximum flow of exhaust gasses, which boosts acceleration. With the conjunctive Crossover design it is not unusual to see an increase of anywhere between fifteen and twenty-five HP. A straight path is afforded by the Open Port Exhaust when it is uncapped; however, but you still benefits from the crossover technology and can expect between ten to fifteen HP. An options that is available on this system is the PYPES PYPE Bomb which utilizes a unique louvered core resonated dual wall 304 stainless tip to give you that American Muscle Car sound but not that popping associated with other lesser kits.

The Loudmouth Exhaust by SLP Performance has transformed many cars like the CAMARO SS into modern muscle machines and you can do that too for your Ford car whether it is a CAMARO or not. The exceptional properties; such as exceptional flow characteristics, lighter weight, ease of installation, stainless steel in its entirety and hand-polished dual wall tips in addition to its incredible sound make it an easy choice when thinking about a performance exhaust system.

Another undisputable winner, B&B (Billy Boat) produces a variety of exhaust systems for your Ford, whether it be a Crew Cab, Super Cab, F-150, Expedition or the Mustang. You can be assured of top quality and performance with a B&B exhaust since they are manufactured using the highest yet most practicable quality stainless steel and are engineered to exact specifications when mandrel bent so that you will have undisturbed air flow.

^