Dodge Injen

<< FIRST < PREV

Page: 1 of 3

  • Dodge Injen
  • SELECT CATEGORY
  • Injen PRODUCT LINE(S)
  • SELECT BRAND
  • Dodge Injen
SORT:
VIEW:
<< FIRST < PREV PAGE: 1 / 3
Injen

Injen

About Injen

Injen Technology is the creator of The World's First Tuned Cold Air Intake System.

For over a decade Injen Technology Co. Ltd and our sister company has played a major roll in the design and development of air intake systems. Injen Technology is based out of California in the same city and just a few miles away from the famous Pomona Winter Nationals Top Fuel Raceway.Injen Technology's history is a classic success story of a small manufacturing company turned industry leader of aftermarket performance products.

What most people do not know is that Injen's sister company, RD Metal Works established in 1981, was actually designing and manufacturing air intake kits for leading air filter and intake manufacturers since the mid 1990's. Absorbing the experience, design capabilities and quality standards of RD Metal Works, Injen Technology was formed. In 1998, we embarked on a never-ending quest to brand our own name and set new standards of quality and performance while constantly striving to improve our own engineering capabilities. Bringing together all phases of manufacturing under one roof proved to be the equation for unrivaled success.

Injen

If you are considering an aftermarket improved air intake system then the team at LMPERFORMANCE knows you are passionate about your car’s performance whether you are using it on the street or on the tract. We also know that you want the best performing and durable air intake system for your automobile. Taking these things into consideration we encourage to take a look at the products from INJEN TECHNOLOGY CO., LTD, one of the leaders in the performance aftermarket industry.

When a small manufacturing company works hard and strives to become one of the best they do not always succeed but that is not the case with INJEN TECHNOLOGY CO., LTD because they did succeed in becoming one of the industry leaders in the development and manufacturing of aftermarket performance products. Having had the opportunity to share in the accomplishments of their sister company RD METAL WORKS has afforded them incomparable knowledge relative to the design and manufacturing of air intake kits because RD METAL WORKS has been doing just that since the mid 1990’s. Utilizing the knowledge and maintaining the quality standards of their sister company INJEN TECHNOLOGY was established in 1998. Having its headquarters in California where the Pomona Winter Nationals Top Fuel Raceway is located was an added boon to the company.

INJEN was determined to make a name for itself in the performance aftermarket industry by designing and manufacturing primo air intake systems allowing them to become one of the leaders in the industry. They were able to accomplish this by integrating all aspects of manufacturing in one facility affording them the opportunity to monitor and evaluate every part of the process and their company became so successful that they saw it necessary to establish a second facility yet still maintaining their dedication to excellence in production.

INJEN TECHNOLOGY is not the kind of company that just sits back and rests on their laurels but they are constantly trying to find new ways to make their products more attractive to the aftermarket enthusiast like you For that reason in 2003 they developed their Super SES Stainless Steel Cat-Back Exhaust Systems that complemented their already existing air intake systems. They were certain to incorporate their signature style slanted mufflers in the new design and to give their customers that much sought after highly polished stainless steel design that you covet.

Now INJEN is not one to stand back while the others pass them up so in 2005 they developed the SP Air Intake System that was equipped with MR Technology thus introducing the World’s First Tuned Air Intake Systems and then they went on to offer you the all new Power Box, another innovation for the Truck, SUV and High Performance Autos.

The most recent innovative product line was introduced by INJEN three years later, the Diesel Power-Flow, the premier design that joined the first Power-On-Demand air intake system with VI Technology and an incomparable removable stainless steel pre-filter.

Dodge

These are some of the items you can find at LMPerformance for your Dodge

The Dodge Charger Hellcat Look Hood is now available from DURAFLEX to give your car that extreme performance look without sacrificing quality because it is manufactured with six ounce fiberglass composed of fiberglass, plastic and resins for the ultimate in durability. Rear bumper covers for your Ram to Viper from DURAFLEX are designed to fit your car exactly and come with a black primer finish. hardware kit and instructions for installation making it easy to replace your damaged or worn bumper. In order to help keep the nose of your Avenger, Challenger, Dakota, Dart, Durango or Magnum down so that you reduce under-steer install a Front Lip Under Spoiler Air Dam from DURAFLEX with the same inimitable quality as all the DURAFLEX products. To reduce drag and increase fuel efficiency in your Stealth, Charger, Avenger, Dart and Magnum consider installing a Rear Lip Under Spoiler Air Dam that can help lessen the lift on your car by "spoiling" the airflow and install Rear Wings that provide a down force on your Challenger, Charger, Ram Truck or Stealth for faster cornering and more stability. If you are trying to reduce the down force that occurs when the side air rushes in to your car's underbody, then side skits by DURAFLEX are the answer because they serve to block the air and thus improve down force levels. For styling, covering large tires, hiding rust or body damage around the wheel well or replacing damaged fender flares on your Dodge Challenger then take a look at the DURAFLEX Fender Flares with hand laid six-ounce fiberglass and black finish.

The first Dodge that came off the assembly line was in 1914 and was a five-passenger touring car with a wheelbase of 110 inches and came equipped with a 25 H.P. four cylinder "L" head engine with a 3 7/8 inch bore and a 4 1/2-inch stroke, a cone clutch, and a pressurized fuel system - a far cry from the Dodge in your garage. The Dodge owners of today want more for their cars and performance aftermarket parts can fill that need with a variety of parts for both the exterior and interior and motor. From SPYDER AUTO, one of the foremost providers of aftermarket lighting you can choose lighting for everything from your Avenger to your SPYDER: Fog Lights, Projector Headlights, Halogen Headlights, Projector Fog Lights, LED Fog Lights, LED Tail Lights that are compliant with all federal regulations and are ISO-9000 certified and ISO-9002 certified. Modernize your Dodge Ram with projector headlights that come with singular LED Halos and with LED TAIL lights that are sure to be visible on the road and as an aesthetic addition anytime.

Filtering airborne contaminants so they don't get into your Dodge engine is a big job and over time the air filter can get clogged and can result in a loss in performance, lower fuel economy, misfiring, missing engine or unusual engine sounds. With a K & N performance air filter you will never have to replace your Dodge Air Filter again because it is washable and reusable and can last up to 50,000 miles before you will have to clean it and is also excellent for filtration and air flow and has a Million Mile Warranty An even better solution to increase air flow in everything from your Dodge Avenger to Viper are Cold-Air Kits by K & N because their design helps to multiply air flow making your engine more powerful. The K & N intakes do the job of lessening the restrictions that appear in factory parts and forming a smooth and straight air flow. The K&N High Performance Oil Filter for your Dodge Challenger is designed for heavy use with less risk of damage in situations such as in racing, rally or off-road use and is stronger than the average filter because it is built with thicker walls and has a safety wire attachment plus has a resin permeated cellulose filter medium allowing increased rate of flow.

The CORSA Exhaust Systems for your Dodge Avenger, Challenger, Charger, MAGNUMM, Ram Truck and Viper are a big improvement over your factory exhaust system because they create a less restrictive airway to expel exhaust gases and result in more power. Another reason for choosing the CORSA is the stupendous selection of sound levels available from the Touring Exhaust, the softest sounding system to the XTREME, the most aggressive sounding system and the absence of drone that is so annoying. Additionally, there is no restriction in the design of the system and as a result you will see an improvement in horsepower and engine revolution. CORSA has a variety of exhaust systems available for your car.

The KONI Sprinter Heavy Track Red Shock are the consummate shock absorber for your Dodge Sprinter because they were specifically designed for the SUV or 4X4 and are up-sized for safer handling on the road and in hazardous conditions and can be adjusted off your Dodge. For your Dodge Neon and Avenger the KONI Sport or Street shocks are worth your consideration with the Sport being the best for lowering springs and on some cars are adjustable externally and with the Street being the entry level performance shock that are non-adjustable. The Classic Shocks for your early year Dodge Coronet, Charger and Challenger give your classic car a modern feel and result in better handling and a safer ride on the road and are off-the-car adjustable. The Dodge Charger and Challenger Street T Kit comes with Street Shocks and custom-made lowering springs that are ideally balanced for your individual ride and to avoid pitch and roll.

^

LM Performance Shopper Approved Reviews