Dodge ASP

<< FIRST < PREV ...   NEXT > LAST >>
  • Dodge ASP
  • SELECT CATEGORY
  • ASP PRODUCT LINE(S)
  • SELECT BRAND
  • Dodge ASP
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
ASP

ASP

About ASP

ASP Underdrive pulley systems increase engine horsepower by reducing the amount of power required to drive external engine accessories. Auto mechanics use ASP underdrive pulleys as a replacement pulley that contains a different ratio and material specifications that free up lost horsepower. By using an ASP underdrive pulley, you are increasing the diameter of each accessory pulley and decreasing the ratio of the crank pulley. The speed at which the accessories are turning relative to the engine's rpm's decrease.

By installing a resized Auto Specialties Performance pulley, the accessories are slowed. This results in more horsepower available to the drive wheels. Typically, a set of Auto Specialties street pulleys will increase horsepower by 12-15, and increase mileage by 2 to 3 MPG.

Why should you buy a Auto Specialties Performance underdrive pulley? Auto Specialties Performance has been in operation since 1988. All ASP pulleys are manufactured from Billet Steel or Aluminum, exceeding factory quality. ASP pulleys start out as as a solid bar of either 6061-T6 Alum or 1045-carbon steel.

If you were able to tour the Auto Specialties Performance factory you would be able to see for yourself how intricate and exacting the production process is from the beginning where all of the solid bars have to be cut to size using an automatic saw that can cut within .010 of an inch. Next they are machine lathed with specifications that can be tweaked to as little as .0003 thousandths of an inch for a perfect fit and then any necessary millwork takes place. And for the most important part, quality control procedures are tantamount at the facility safeguards are in place at all stages of the total operation to assure that the customer gets a product that is manufactured to perfection. From this visit it would be easy to see why Auto Specialties Performance (ASP) has been the leader in the underdrive pulley market for twenty years and why they should be trusted with you are in the market for and underdrive part .

The ASP UNDERDRIVE CRANK AND UNDERDRIVE ALTERNATOR PULLEY that is SFI approved racing for your 1998-02 Firebird V8 can give you back some of the much needed horsepower that is stolen by your water pump, A/C compressor and power steering when powered by a factory installed pulley and as a plus you can see up to a 15 percent increase in horsepower with the underdrive pulley system. And for better performance in your Corvette consider the ASP Underdrive Pulley SFI Approved 25% Harmonic DAMPNER Crank for a reduction in crankshaft torsional vibration, greater valve train and timing efficiency and a reduction in wear to the car’s main bearings, oil pump and crankshaft. And if you are on the racing circuit with your Camaro you might be interested in the ASP LT-1 pulley 23% Crank 'Nitride' Camaro 1993-97 V8 with its nitride coating that diffuses nitrogen into the surface creating a much harder surface and more durable product so important considering the rigors of racing. If you're looking for a performance exhaust, check out our Borla Exhaust Systems here!

ASP Review(s):

Reviews for ASP's products are show below.

ASP Underdrive Pulley (SFI Approved) 25% Underdrive LS1 Camaro Street/Strip 1998-02 V8
5 Stars asp underdrive pulley, Date: 11/14/2009

By: Gizmo
Ownership: 1 month - 1 year
The car now runs alot better, more miles to the gallon, high rpm revs, and close to 19 more horsepower(18.7hp).

Current Mods:
slp-headers, high flow cats, y-pipe, magnaflow exhaust, sphon torque arm, sphon tubular sub frame connectors, sphon drive shaft, sphon rear tubular adjustable lower control arms , three inch steel drive shaft rated to hold 1,200 horse power, 4.11 moser 12 bolt rear, short throw shifter, slp flow pac, drilled and slotted bear rotors and ebc green stuff pads on all four corners, 20% tint all around, 90 mm slp mass air flow sensor, and asp 25% underdrive pulley.


Newest ASP Car Parts for Your Dodge

Dodge

These are some of the items you can find at LMPerformance for your Dodge

The Dodge Charger Hellcat Look Hood is now available from DURAFLEX to give your car that extreme performance look without sacrificing quality because it is manufactured with six ounce fiberglass composed of fiberglass, plastic and resins for the ultimate in durability. Rear bumper covers for your Ram to Viper from DURAFLEX are designed to fit your car exactly and come with a black primer finish. hardware kit and instructions for installation making it easy to replace your damaged or worn bumper. In order to help keep the nose of your Avenger, Challenger, Dakota, Dart, Durango or Magnum down so that you reduce under-steer install a Front Lip Under Spoiler Air Dam from DURAFLEX with the same inimitable quality as all the DURAFLEX products. To reduce drag and increase fuel efficiency in your Stealth, Charger, Avenger, Dart and Magnum consider installing a Rear Lip Under Spoiler Air Dam that can help lessen the lift on your car by "spoiling" the airflow and install Rear Wings that provide a down force on your Challenger, Charger, Ram Truck or Stealth for faster cornering and more stability. If you are trying to reduce the down force that occurs when the side air rushes in to your car's underbody, then side skits by DURAFLEX are the answer because they serve to block the air and thus improve down force levels. For styling, covering large tires, hiding rust or body damage around the wheel well or replacing damaged fender flares on your Dodge Challenger then take a look at the DURAFLEX Fender Flares with hand laid six-ounce fiberglass and black finish.

The first Dodge that came off the assembly line was in 1914 and was a five-passenger touring car with a wheelbase of 110 inches and came equipped with a 25 H.P. four cylinder "L" head engine with a 3 7/8 inch bore and a 4 1/2-inch stroke, a cone clutch, and a pressurized fuel system - a far cry from the Dodge in your garage. The Dodge owners of today want more for their cars and performance aftermarket parts can fill that need with a variety of parts for both the exterior and interior and motor. From SPYDER AUTO, one of the foremost providers of aftermarket lighting you can choose lighting for everything from your Avenger to your SPYDER: Fog Lights, Projector Headlights, Halogen Headlights, Projector Fog Lights, LED Fog Lights, LED Tail Lights that are compliant with all federal regulations and are ISO-9000 certified and ISO-9002 certified. Modernize your Dodge Ram with projector headlights that come with singular LED Halos and with LED TAIL lights that are sure to be visible on the road and as an aesthetic addition anytime.

Filtering airborne contaminants so they don't get into your Dodge engine is a big job and over time the air filter can get clogged and can result in a loss in performance, lower fuel economy, misfiring, missing engine or unusual engine sounds. With a K & N performance air filter you will never have to replace your Dodge Air Filter again because it is washable and reusable and can last up to 50,000 miles before you will have to clean it and is also excellent for filtration and air flow and has a Million Mile Warranty An even better solution to increase air flow in everything from your Dodge Avenger to Viper are Cold-Air Kits by K & N because their design helps to multiply air flow making your engine more powerful. The K & N intakes do the job of lessening the restrictions that appear in factory parts and forming a smooth and straight air flow. The K&N High Performance Oil Filter for your Dodge Challenger is designed for heavy use with less risk of damage in situations such as in racing, rally or off-road use and is stronger than the average filter because it is built with thicker walls and has a safety wire attachment plus has a resin permeated cellulose filter medium allowing increased rate of flow.

The CORSA Exhaust Systems for your Dodge Avenger, Challenger, Charger, MAGNUMM, Ram Truck and Viper are a big improvement over your factory exhaust system because they create a less restrictive airway to expel exhaust gases and result in more power. Another reason for choosing the CORSA is the stupendous selection of sound levels available from the Touring Exhaust, the softest sounding system to the XTREME, the most aggressive sounding system and the absence of drone that is so annoying. Additionally, there is no restriction in the design of the system and as a result you will see an improvement in horsepower and engine revolution. CORSA has a variety of exhaust systems available for your car.

The KONI Sprinter Heavy Track Red Shock are the consummate shock absorber for your Dodge Sprinter because they were specifically designed for the SUV or 4X4 and are up-sized for safer handling on the road and in hazardous conditions and can be adjusted off your Dodge. For your Dodge Neon and Avenger the KONI Sport or Street shocks are worth your consideration with the Sport being the best for lowering springs and on some cars are adjustable externally and with the Street being the entry level performance shock that are non-adjustable. The Classic Shocks for your early year Dodge Coronet, Charger and Challenger give your classic car a modern feel and result in better handling and a safer ride on the road and are off-the-car adjustable. The Dodge Charger and Challenger Street T Kit comes with Street Shocks and custom-made lowering springs that are ideally balanced for your individual ride and to avoid pitch and roll.

^

LM Performance Shopper Approved Reviews