Chrysler Amerihood

<< FIRST < PREV ...   NEXT > LAST >>
  • Chrysler Amerihood
  • SELECT CATEGORY
  • Amerihood PRODUCT LINE(S)
  • SELECT BRAND
  • Chrysler Amerihood
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Amerihood

Amerihood

About Amerihood

When a company is recognized as the foremost designers and distributors of Fibre-reinforced plastic composite body kits and other products like fenders, spoilers and Carbon Fiber hoods you can be sure you are getting a quality product. AMERIHOOD, a division of AIT, is just such a company. Having proven their value in the aftermarket performance industry since their inception in June 2002 they deserve the recognition they have achieved because of their dedication to precise fitment and excellence in quality of product. The AMERIHOOD racing line is celebrated for its sui generis quality and specificity of fit and as a consequence is used in D1, Formula Drift, NOPI Drift, Red Line Time Attack, Super Lap Battle, SCCA, and NASA races as well as in minor track events. The company is able to accomplish all of this in their 25,000 sq. ft. warehouse located in Chino, California assuring you of a commitment to quality by one of the largest aftermarket performance body parts distributors. Attention to detail and quality of product are paramount and have led to the success of AMERIHOOD in the industry both for racing and every day use.

About Amerihood

One example of an AMERIHOOD primo quality product is the Ram Air Hood for your Chevrolet Silverado HD 3500 featured on the LMPERFORMANCE web site. Because ram air utilizes a forward facing scoop you will notice that when you are driving at speed the air blowing over your car's hood is forced into the scoops thus causing a reduction in the effort needed to pull air into your Silverado's engine. The Ram Air Hood serves to pull cooler air in and forces more air into the intake and is ideally suited as a replacement for your stock Silverado hood allowing direct cold intake air to work perfectly with your performance air intake systems. And there is no need to concern yourself with durability and style because the AMERIHOOD ram air hood is exceptional with its material of hand laid high quality fiberglass and resin along with a gel coat finish on both top and under side to make for easier prep before painting. And at no additional cost to you there is a functional Ram Air tunnel built into every hood and you can use your factory hinges and latch for easy installation. And if that is not enough it utilizes two vented heat extractor vents that serve to draw hot air from your Silverado engine bay.

Whether you are in the market for an aftermarket performance hood for aesthetic reasons or to improve your engine’s performance you won’t go wrong with a Ram Air Hood from AMERIHOOD for both style and durability and backed by a company you can trust. Let the team at LMPERFORMANCE help you get the look and performance you crave for your Chevrolet Silverado at a competitive price and with free shipping as well. See what a difference a Ram Air Hood will make when you hit top speed with your Silverado on the track or cruising along the highway.

Amerihood Review(s):

Reviews for Amerihood's products are show below.

Amerihood Chevrolet Silverado 2500HD 2005-2007 Type-E Style Functional Ram Air Hood
4 Stars GOOD LOOKIN' & GOOD FUNCTION...hard to fit though, Date: 8/23/2017

By: AD
Ownership: 1 week - 1 month
Purchased this Amerihood RAM Air intake, heat exhausting hood for my Chevy diesel truck. It cost me another $450 to have painted, but it sure looks great on my truck! I drove it and have seen excellent results with keeping the temp down having this cold air intake hood directing outside air directly to the air filter, and the vents allowing hot air to escape out the top of the hood. I have noticed that the hood shakes more than my original steel hood when driving, especially on bumpy roads, so I'm hoping it will last and not break with the extra movement. The only problem I've had so far is that installing it was a ROYAL PAIN IN THE BEHIND! I expected, with the &quot;bolt on&quot; using factory holes it would be a quick job, but what I expected to take 15 mins took over 4 hours! I had to loosen and readjust the placement 1/8&quot; at a time over and over to get it so the hood would fit correctly and also to close. Infact, I had to take a cut off wheel and cut my AirAide air filter bracket down 1&quot; lower so the hood would even close at all. So, when you purchase this, just be prepared for a big project installing it. I love how it looks though and how it works, as long as it will last for years! (I was concerned to see the warranty is only 90 days and wouldn't have bought it had I seen that ahead of time. I'd expect at least a ONE Year warranty on a good product.)

Current Mods:
Amerihood for 2005 Chevy Duramax LLY


Chrysler

These are some of the items you can find at LMPerformance for your Chrysler

Chrysler has been around since 1925 and have produced a wealth of automobiles and our teams wants to help you find the performance part you need for your Chrysler. If your goal is to upgrade your performance and fuel consider the Diablo Sport inTunei2 Performance Programmer with its “Easy Tune” technology that make it a breeze to install.

For improved performance in your exhaust you need one that is not restricting and you can find that for your 300 and 300C with the prestigious American Racing Headers either in a full system, a full header and exhaust system or just headers, whichever you choose. With American Racing Headers products you can be assured of the latest technology combined with first class quality and a great sound.

An exhaust system for your Chrysler Crossfire, the BORLA exhaust is just the ticket with its stainless inside and out sui generis intercooler tips and spectacular look you won’t go wrong with BORLA. There won’t be any droning or roaring sound with your BORLA exhaust and the sound will be in the rear where it belongs. Installation is doable in a reasonable amount of time depending and you get the safety of a million-mile warranty.

For your 300, 300C, Aspen, Crossfire, PTCRUISER and Sebring take a gander at the exhaust systems available from MAGNAFLOW, a time tested company who offers a lifetime guarantee because they know you can depend on their product to give you outstanding performance for a very long time.

Don’t forget about that all important clutch and the benefits you derive from a top-rate clutch like SPEC with their array of clutch designs to meet your demand for a clutch that is not one-size-fits-all. Manufactured with you the driver in mind and offering you a choice when it comes to a quality product. SPEC says you make the decision not the car company who installed your clutch and see what a difference it makes.

And for your Chrysler 300 and 300C a new driveshaft from The Driveshaft Shop whose wealth of experience can make you feel confident that you are buying a quality product from a company who stands behind their work since their drive shafts are perfectly balanced to ensure that they are the best they can be.

We didn’t forget about your Chrysler body because we you want it to look great and want to improve it aerodynamically and that is why we are proud to offer you the DURAFLEX brand with their inimitable product make of a compilation of plastic, flex resins and fiberglass. The body kits and body parts for your 300, 300C, Crossfire, PTCRUISER, and Crossfire are sure to make people take notice when you install them on your car and they will give you the added advantage of helping to control the wind forces that affect your car’s performance. Whether it be something simple like a rear wing or the whole package, you won’t be disappointed in the quality and look of the DURAFLEX product and it comes already primed for easy painting.

^