Chevrolet Gibson Exhaust

<< FIRST < PREV ...   NEXT > LAST >>
  • Chevrolet Gibson Exhaust
  • SELECT CATEGORY
  • Gibson Exhaust PRODUCT LINE(S)
  • SELECT BRAND
  • Chevrolet Gibson Exhaust
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
Gibson Exhaust

Gibson Exhaust

About Gibson Exhaust

Unable to find an exhaust system to supply the power and torque they needed for their motor home the founders of GIBSON PERFORMANCE decided they needed to do it themselves and went about the job of finding the best engineers and technicians they could to begin creating a prototype of what they felt they needed. They had a multiplicity of goals in mind: more power than what was available on the market, increased fuel economy, affordable, resulted in a cooler running engine, longer engine life and easy to install. That was quite a tall order right from the start, then in the early 1990’s after they had established themselves in the RV market they turned to the sport trucks and 4x4. And now, all these years later they are the most cost-effective performance Gibson exhaust system that can be used in fifty states for trucks, SUV’s, diesel, and off-road. The GIBSON exhaust and Gibson headers stayed true to their goal in providing a system that was easy to install with its bolt-on application and the aluminized or stainless steel product looks good and affords increased performance. GIBSON PERFORMANCE can now boast that from their simple beginnings they are one of the largest aftermarket performance Gibson exhaust companies in the industry and have grown the company so that it encompasses a complete line of Gibson headers, Gibson exhaust systems and accessories for trucks and tow-vehicles. GIBSON has been able to accomplish all of this because of their commitment to research and development in the California location where they use the best in software, dynamometers, flow benches and testing equipment and finish it all up with unparalleled quality control techniques. They are also cognizant of the fact that they want to deliver the most horsepower and torque in a decreased rpm range to satisfy a greater customer need especially when you want to use your vehicle for towing purposes. The GIBSON system helps to increase the exhaust flow in your engine by getting rid of the restrictions inherent in a factory system and they do this by employing a baffled and chambered structure in the muffler design. I think you will agree that they have honored their original commitments when you peruse the LMPERFORMANCE web site and see what they have to offer you to improve your vehicle’s performance and see how economical the change to this new system can be.

The GIBSON Silverado 5.3L Extreme Exhaust Cat-Back with Dual Split Rear Exit for Crew Cab 6.5ft bed available on the LMPERFORMANCE web site is a perfect example of an economic yet quality exhaust system with its outstanding exhaust tone, great looks and remarkable performance gains. And they didn’t stop with the trucks and SUV’s because GIBSON now has a line of Gibson exhausts & Gibson headers for the late model muscle cars like the one available on the LMPERFORMANCE web site for your 1998-02 Camaro in CFT stainless steel. Peruse these and all of the other parts available and find one that suits your needs and make a difference in your car, truck or SUV’s performance with an upgraded exhaust system from GIBSON. We have more great products here at Bassani Exhaust System.

About Gibson Exhaust

Gibson Exhaust Review(s):

Reviews for Gibson Exhaust's products are show below.

Gibson Exhuast System for 1998-02 Camaro V8 (Stainless Steel)
5 Stars Great Catback, Date: 8/10/2009

By: Shockwave179-LS1Tech
Ownership: more than 1 year
I have this catback with ARH Catted Longtubes and it sounds great. It''s reasonable at idle and crusing and gets louder when you get on it. I think its a great balance.

Current Mods:
ARH Catted Longtubes, Gibson Catback, LS6 Intake Manifold, Ported and Polished TB, SLP Lid, FTRA


Chevrolet

These are some of the items you can find at LMPerformance for your Chevrolet

The Chevrolet company founded in 1911 by a Swiss race car driver and automotive engineer, has gone on to produce some of the celebrated icons in the automobile industry with names like the Corvette and CAMARO, much coveted by collectors and racing enthusiasts. The team at Late Model Performance can help you find the consummate part for the repair or improvement of your Chevrolet with aftermarket performance add-ons. The owner having been the proud owner of CAMAROS for many years knows the car well and ergo has been able to assemble just the right parts for your CAMARO and other model Chevrolets. Late Model Performance has an extensive inventory of top quality parts from the leading craftsmen in the industry, names such as EIBACH, Ram, Spec, SLP to name just a few and a brief scan of the parts list will acquaint you with just the part to meet your needs.

For performance aftermarket parts they don't get any better than SLP Performance, the noteworthy manufacturer of a wide range of performance enhancements that have aided in the transformation of late-model cars into modern muscle machines, cars like the CAMARO SS. The famous "loudmouth" exhaust systems for your CAMARO and Cobalt SS include the LOUDMOUTH resonator with almost no flow restriction and outstanding sound. The Dual Tip Tailpipe Assembly for your AVALANCE, Tahoe, Suburban, Yukon, Yukon XL that replaces your stock tip has low muscle tone and is easy to install and gives your truck a completely new individualized look. The POWERFLO Exhaust System for your CAMARO, Cobalt SS, and Trailblazer includes a pair of POWERFLO mufflers for a rich performance sound and can be installed in under 30 minutes. To solve the problem of the restrictive air box in your CAMARO install the SLP Performance Air Box Lid to eliminate the restrictive baffles at the rear of your stock lid and see the difference it makes in your horsepower. Also for your CAMARO, the SLP Axle Half-Shafts Extreme Duty that eliminate wheel hop at launch because they use different diameter chrome axle bars on each side. The SLP CAMARO V-8 Front Brake Package comes with 6-piston calipers and two-piece 15 rotors for increased thermal capacity, pad area that provides more effective out-gassing, all resulting in improved braking efficiency and reduced fade. Peruse the LMPERFORMANCE web site for the propitious section of SLP parts for your brand Chevrolet.

The prestigious KOOKS brand of Exhaust Systems is another choice for your CAMARO, Corvette, Silverado, Tahoe, SSR, Trailblazer and Trailblazer SS aftermarket performance exhaust needs whether it be a GREEN CATTED, OFF-ROAD, CATTED or AXLE BACK and with X and y Pipes. The KOOKS reputation is indisputably first-rate in the aftermarket performance industry because they are handcrafted in the USA using the highest quality products for the best performance and they are EPA legal in 49 states.

For your CAMARO, Corvette, Silverado, CHEVETTE, Nova, Monte Carlo, SSR and Trailblazer SS try the noteworthy AMERICAN RACING HEADERS brand of Exhaust Systems, Down Pipes, Tips, Headers, Short Headers, Mid Pipes engineered with 304 Stainless Steel and with 3/8-inch stainless steel flanges. Or better yet consider a Full Exhaust and Header System for your Chevy CAMARO or Chevy SS in a variety of configurations, with or without cats, off-road, whatever your desire, and constructed with the pristine quality you expect from American Racing Headers. At American Racing Headers primary tubes are engineered to individual engine output affording the least amount of compromise in the engine bay affording the greatest horsepower gain.

Another possibility for your exhaust needs is the B&B BILLY BOAT brand with over 25 years’ experience designing and manufacturing premier exhaust components. Let Billy Boat help you free your CAMARO, Corvette, Impala SS, Silverado, Suburban and Tahoe engine's power by installing a complete exhaust system with T-304 Stainless Steel, mandrel bending and mufflers developed in-house giving you unparalleled performance and sound. Install a Cold-Air Kits to help your Corvette breathe better so that your engine performs the way you want it to. Performance headers on your CAMARO and Corvette with give you that polished eye catching look you want for your prized possession. Scrutinize all the exhaust parts by Billy Boat including various Pipes and Headers to find the aftermarket performance part that best suits your needs and get the best.

Still want more opportunities then take a look at the preponderance of exhaust parts available from the renowned manufacturer, PYPES, for everything from CAMARO to the Silverado, including complete Exhaust Systems, Headers, Pipes and Tips. With three different mufflers, the Violator, the Street Pro, and the Race Pro offered you can decide if you want the loudest sound or the quietest and with the X-change X-pipes you can conveniently add electric cutouts to your X-Pipes.

Want Mid-Pipes for your CAMARO or Corvette then scrutinize the information available on the Stainless Works brand of pipes to learn why they will never red-rust like cheaper brands. And for your CAMARO owners, the CAMARO Convertible Conversion Kit for 6.2L. 2011+ CAMARO V8 can adapt the clearance around the convertible frame bracing to allow you to use Stainless Works 3" dual exhausts. For Headers or Complete Exhaust Systems for everything from CAMARO to Trailblazer SS examine the parts available on our web site to make you engine perform the way it should and look the way you want.

^