Chevrolet DeWitts

<< FIRST < PREV

Page: 1 of 19

  • Chevrolet DeWitts
  • SELECT CATEGORY
  • DeWitts PRODUCT LINE(S)
  • SELECT BRAND
  • Chevrolet DeWitts
SORT:
VIEW:
<< FIRST < PREV PAGE: 1 / 19
DeWitts

DeWitts

About DeWitts

Have you had the experience of steam pouring out of your car or maybe seen this happen to someone along the highway? Well you guessed it, a faulty radiator is the culprit and the team at DeWitts is here to make sure this never happens to your car. They realize that the radiator is an integral part of any car’s coolant system and this is especially true of a performance car that functions at top speeds. The friction that results from your car’s cacophony of moving parts is the miscreant in this case because friction results in excess heat energy. Lucky for you, this can all be avoided with a radiator from a reputable manufacturer and DeWitts fits the bill when it comes to a quality, dependable radiator.

Those owners who operate their cars at higher horsepower don’t have to worry because DeWitts understands heat load and they have test results on each radiator’s heat rejection and have published that rating comparing it to the factory unity. In the majority of cases DeWitts double row radiators are a 30% increase in heat rejection and that is no small gain and if you supplement this with an electric fan you can boost that number an additional 10%..You don’t have to worry about fit when it comes to a DeWitts radiator since they hold the official U. S. trademark for the term Direct Fit and this assures you that each and every DeWitts aluminum radiator is designed to specifically fit the listed application without the need for any modifications to your vehicle. As a bonus if you have a car that was manufactured after 1983 you will find that the DeWitts radiator are manufactured as double row radiators and consequently can hold one additional gallon of fluid over your factory installed radiator.

For those car aficionados who want even more cooling capability because of the demands of their particular driving situation the DeWitts radiators are available with 1.25 inch pipes providing approximately 10% additional cooling capability but remember a double row core, already on the radiator, is equal to a five row copper unit and is almost double the heat rejection of a single row aluminum unit. So you may find the 1.25 inch tubes totally unnecessary. An important thing to consider when choosing any product is where and how it is manufactured and you won’t go wrong with DeWitts because the aluminum radiators are made in the USA in Michigan where they can oversee 100% of the manufacturing process. They thought of quality of product first when they chose a CAB brazing furnace allowing them to produce a primo aluminum core second to none. Having fifteen years of experience building Direct Fit radiators beginning with Corvette radiators gives them a wealth of knowledge when it comes to product design and manufacturing. Give your high performance vehicle the cooling it needs for your high performance driving with a DeWitts radiator and see what a difference a cool engine can mean.

About DeWitts

DeWitts aluminum radiators are made in Michigan and 100% of the manufacturing process is managed in house. Our CAB brazing furnace allows us to produce the finest aluminum cores in the industry. We have the capability to build custom aluminum radiators with a variety of tube widths and fin designs. We have several fin machines to produce the type of fin required for your application. Most of our radiators are assembled with press-formed end tanks. This eliminates the fabrication seams and potential leak points of a common box tank. It also provides an original look for those classic cars. Every radiator is available with our Black Ice Coating. We have expanded our line to many other makes and models.

Chevrolet

These are some of the items you can find at LMPerformance for your Chevrolet

The Chevrolet company founded in 1911 by a Swiss race car driver and automotive engineer, has gone on to produce some of the celebrated icons in the automobile industry with names like the Corvette and CAMARO, much coveted by collectors and racing enthusiasts. The team at Late Model Performance can help you find the consummate part for the repair or improvement of your Chevrolet with aftermarket performance add-ons. The owner having been the proud owner of CAMAROS for many years knows the car well and ergo has been able to assemble just the right parts for your CAMARO and other model Chevrolets. Late Model Performance has an extensive inventory of top quality parts from the leading craftsmen in the industry, names such as EIBACH, Ram, Spec, SLP to name just a few and a brief scan of the parts list will acquaint you with just the part to meet your needs.

For performance aftermarket parts they don't get any better than SLP Performance, the noteworthy manufacturer of a wide range of performance enhancements that have aided in the transformation of late-model cars into modern muscle machines, cars like the CAMARO SS. The famous "loudmouth" exhaust systems for your CAMARO and Cobalt SS include the LOUDMOUTH resonator with almost no flow restriction and outstanding sound. The Dual Tip Tailpipe Assembly for your AVALANCE, Tahoe, Suburban, Yukon, Yukon XL that replaces your stock tip has low muscle tone and is easy to install and gives your truck a completely new individualized look. The POWERFLO Exhaust System for your CAMARO, Cobalt SS, and Trailblazer includes a pair of POWERFLO mufflers for a rich performance sound and can be installed in under 30 minutes. To solve the problem of the restrictive air box in your CAMARO install the SLP Performance Air Box Lid to eliminate the restrictive baffles at the rear of your stock lid and see the difference it makes in your horsepower. Also for your CAMARO, the SLP Axle Half-Shafts Extreme Duty that eliminate wheel hop at launch because they use different diameter chrome axle bars on each side. The SLP CAMARO V-8 Front Brake Package comes with 6-piston calipers and two-piece 15 rotors for increased thermal capacity, pad area that provides more effective out-gassing, all resulting in improved braking efficiency and reduced fade. Peruse the LMPERFORMANCE web site for the propitious section of SLP parts for your brand Chevrolet.

The prestigious KOOKS brand of Exhaust Systems is another choice for your CAMARO, Corvette, Silverado, Tahoe, SSR, Trailblazer and Trailblazer SS aftermarket performance exhaust needs whether it be a GREEN CATTED, OFF-ROAD, CATTED or AXLE BACK and with X and y Pipes. The KOOKS reputation is indisputably first-rate in the aftermarket performance industry because they are handcrafted in the USA using the highest quality products for the best performance and they are EPA legal in 49 states.

For your CAMARO, Corvette, Silverado, CHEVETTE, Nova, Monte Carlo, SSR and Trailblazer SS try the noteworthy AMERICAN RACING HEADERS brand of Exhaust Systems, Down Pipes, Tips, Headers, Short Headers, Mid Pipes engineered with 304 Stainless Steel and with 3/8-inch stainless steel flanges. Or better yet consider a Full Exhaust and Header System for your Chevy CAMARO or Chevy SS in a variety of configurations, with or without cats, off-road, whatever your desire, and constructed with the pristine quality you expect from American Racing Headers. At American Racing Headers primary tubes are engineered to individual engine output affording the least amount of compromise in the engine bay affording the greatest horsepower gain.

Another possibility for your exhaust needs is the B&B BILLY BOAT brand with over 25 years’ experience designing and manufacturing premier exhaust components. Let Billy Boat help you free your CAMARO, Corvette, Impala SS, Silverado, Suburban and Tahoe engine's power by installing a complete exhaust system with T-304 Stainless Steel, mandrel bending and mufflers developed in-house giving you unparalleled performance and sound. Install a Cold-Air Kits to help your Corvette breathe better so that your engine performs the way you want it to. Performance headers on your CAMARO and Corvette with give you that polished eye catching look you want for your prized possession. Scrutinize all the exhaust parts by Billy Boat including various Pipes and Headers to find the aftermarket performance part that best suits your needs and get the best.

Still want more opportunities then take a look at the preponderance of exhaust parts available from the renowned manufacturer, PYPES, for everything from CAMARO to the Silverado, including complete Exhaust Systems, Headers, Pipes and Tips. With three different mufflers, the Violator, the Street Pro, and the Race Pro offered you can decide if you want the loudest sound or the quietest and with the X-change X-pipes you can conveniently add electric cutouts to your X-Pipes.

Want Mid-Pipes for your CAMARO or Corvette then scrutinize the information available on the Stainless Works brand of pipes to learn why they will never red-rust like cheaper brands. And for your CAMARO owners, the CAMARO Convertible Conversion Kit for 6.2L. 2011+ CAMARO V8 can adapt the clearance around the convertible frame bracing to allow you to use Stainless Works 3" dual exhausts. For Headers or Complete Exhaust Systems for everything from CAMARO to Trailblazer SS examine the parts available on our web site to make you engine perform the way it should and look the way you want.

^