Chevrolet ASP

<< FIRST < PREV ...   NEXT > LAST >>
  • Chevrolet ASP
  • SELECT CATEGORY
  • ASP PRODUCT LINE(S)
  • SELECT BRAND
  • Chevrolet ASP
SORT:
VIEW:
<< FIRST < PREV ...   NEXT > LAST >>
ASP

ASP

About ASP

ASP Underdrive pulley systems increase engine horsepower by reducing the amount of power required to drive external engine accessories. Auto mechanics use ASP underdrive pulleys as a replacement pulley that contains a different ratio and material specifications that free up lost horsepower. By using an ASP underdrive pulley, you are increasing the diameter of each accessory pulley and decreasing the ratio of the crank pulley. The speed at which the accessories are turning relative to the engine's rpm's decrease.

By installing a resized Auto Specialties Performance pulley, the accessories are slowed. This results in more horsepower available to the drive wheels. Typically, a set of Auto Specialties street pulleys will increase horsepower by 12-15, and increase mileage by 2 to 3 MPG.

Why should you buy a Auto Specialties Performance underdrive pulley? Auto Specialties Performance has been in operation since 1988. All ASP pulleys are manufactured from Billet Steel or Aluminum, exceeding factory quality. ASP pulleys start out as as a solid bar of either 6061-T6 Alum or 1045-carbon steel.

If you were able to tour the Auto Specialties Performance factory you would be able to see for yourself how intricate and exacting the production process is from the beginning where all of the solid bars have to be cut to size using an automatic saw that can cut within .010 of an inch. Next they are machine lathed with specifications that can be tweaked to as little as .0003 thousandths of an inch for a perfect fit and then any necessary millwork takes place. And for the most important part, quality control procedures are tantamount at the facility safeguards are in place at all stages of the total operation to assure that the customer gets a product that is manufactured to perfection. From this visit it would be easy to see why Auto Specialties Performance (ASP) has been the leader in the underdrive pulley market for twenty years and why they should be trusted with you are in the market for and underdrive part .

The ASP UNDERDRIVE CRANK AND UNDERDRIVE ALTERNATOR PULLEY that is SFI approved racing for your 1998-02 Firebird V8 can give you back some of the much needed horsepower that is stolen by your water pump, A/C compressor and power steering when powered by a factory installed pulley and as a plus you can see up to a 15 percent increase in horsepower with the underdrive pulley system. And for better performance in your Corvette consider the ASP Underdrive Pulley SFI Approved 25% Harmonic DAMPNER Crank for a reduction in crankshaft torsional vibration, greater valve train and timing efficiency and a reduction in wear to the car’s main bearings, oil pump and crankshaft. And if you are on the racing circuit with your Camaro you might be interested in the ASP LT-1 pulley 23% Crank 'Nitride' Camaro 1993-97 V8 with its nitride coating that diffuses nitrogen into the surface creating a much harder surface and more durable product so important considering the rigors of racing. If you're looking for a performance exhaust, check out our Borla Exhaust Systems here!

About ASP

ASP Review(s):

Reviews for ASP's products are show below.

ASP Underdrive Pulley (SFI Approved) 25% Underdrive LS1 Camaro Street/Strip 1998-02 V8
5 Stars asp underdrive pulley, Date: 11/14/2009

By: Gizmo
Ownership: 1 month - 1 year
The car now runs alot better, more miles to the gallon, high rpm revs, and close to 19 more horsepower(18.7hp).

Current Mods:
slp-headers, high flow cats, y-pipe, magnaflow exhaust, sphon torque arm, sphon tubular sub frame connectors, sphon drive shaft, sphon rear tubular adjustable lower control arms , three inch steel drive shaft rated to hold 1,200 horse power, 4.11 moser 12 bolt rear, short throw shifter, slp flow pac, drilled and slotted bear rotors and ebc green stuff pads on all four corners, 20% tint all around, 90 mm slp mass air flow sensor, and asp 25% underdrive pulley.


Chevrolet

These are some of the items you can find at LMPerformance for your Chevrolet

The Chevrolet company founded in 1911 by a Swiss race car driver and automotive engineer, has gone on to produce some of the celebrated icons in the automobile industry with names like the Corvette and CAMARO, much coveted by collectors and racing enthusiasts. The team at Late Model Performance can help you find the consummate part for the repair or improvement of your Chevrolet with aftermarket performance add-ons. The owner having been the proud owner of CAMAROS for many years knows the car well and ergo has been able to assemble just the right parts for your CAMARO and other model Chevrolets. Late Model Performance has an extensive inventory of top quality parts from the leading craftsmen in the industry, names such as EIBACH, Ram, Spec, SLP to name just a few and a brief scan of the parts list will acquaint you with just the part to meet your needs.

For performance aftermarket parts they don't get any better than SLP Performance, the noteworthy manufacturer of a wide range of performance enhancements that have aided in the transformation of late-model cars into modern muscle machines, cars like the CAMARO SS. The famous "loudmouth" exhaust systems for your CAMARO and Cobalt SS include the LOUDMOUTH resonator with almost no flow restriction and outstanding sound. The Dual Tip Tailpipe Assembly for your AVALANCE, Tahoe, Suburban, Yukon, Yukon XL that replaces your stock tip has low muscle tone and is easy to install and gives your truck a completely new individualized look. The POWERFLO Exhaust System for your CAMARO, Cobalt SS, and Trailblazer includes a pair of POWERFLO mufflers for a rich performance sound and can be installed in under 30 minutes. To solve the problem of the restrictive air box in your CAMARO install the SLP Performance Air Box Lid to eliminate the restrictive baffles at the rear of your stock lid and see the difference it makes in your horsepower. Also for your CAMARO, the SLP Axle Half-Shafts Extreme Duty that eliminate wheel hop at launch because they use different diameter chrome axle bars on each side. The SLP CAMARO V-8 Front Brake Package comes with 6-piston calipers and two-piece 15 rotors for increased thermal capacity, pad area that provides more effective out-gassing, all resulting in improved braking efficiency and reduced fade. Peruse the LMPERFORMANCE web site for the propitious section of SLP parts for your brand Chevrolet.

The prestigious KOOKS brand of Exhaust Systems is another choice for your CAMARO, Corvette, Silverado, Tahoe, SSR, Trailblazer and Trailblazer SS aftermarket performance exhaust needs whether it be a GREEN CATTED, OFF-ROAD, CATTED or AXLE BACK and with X and y Pipes. The KOOKS reputation is indisputably first-rate in the aftermarket performance industry because they are handcrafted in the USA using the highest quality products for the best performance and they are EPA legal in 49 states.

For your CAMARO, Corvette, Silverado, CHEVETTE, Nova, Monte Carlo, SSR and Trailblazer SS try the noteworthy AMERICAN RACING HEADERS brand of Exhaust Systems, Down Pipes, Tips, Headers, Short Headers, Mid Pipes engineered with 304 Stainless Steel and with 3/8-inch stainless steel flanges. Or better yet consider a Full Exhaust and Header System for your Chevy CAMARO or Chevy SS in a variety of configurations, with or without cats, off-road, whatever your desire, and constructed with the pristine quality you expect from American Racing Headers. At American Racing Headers primary tubes are engineered to individual engine output affording the least amount of compromise in the engine bay affording the greatest horsepower gain.

Another possibility for your exhaust needs is the B&B BILLY BOAT brand with over 25 years’ experience designing and manufacturing premier exhaust components. Let Billy Boat help you free your CAMARO, Corvette, Impala SS, Silverado, Suburban and Tahoe engine's power by installing a complete exhaust system with T-304 Stainless Steel, mandrel bending and mufflers developed in-house giving you unparalleled performance and sound. Install a Cold-Air Kits to help your Corvette breathe better so that your engine performs the way you want it to. Performance headers on your CAMARO and Corvette with give you that polished eye catching look you want for your prized possession. Scrutinize all the exhaust parts by Billy Boat including various Pipes and Headers to find the aftermarket performance part that best suits your needs and get the best.

Still want more opportunities then take a look at the preponderance of exhaust parts available from the renowned manufacturer, PYPES, for everything from CAMARO to the Silverado, including complete Exhaust Systems, Headers, Pipes and Tips. With three different mufflers, the Violator, the Street Pro, and the Race Pro offered you can decide if you want the loudest sound or the quietest and with the X-change X-pipes you can conveniently add electric cutouts to your X-Pipes.

Want Mid-Pipes for your CAMARO or Corvette then scrutinize the information available on the Stainless Works brand of pipes to learn why they will never red-rust like cheaper brands. And for your CAMARO owners, the CAMARO Convertible Conversion Kit for 6.2L. 2011+ CAMARO V8 can adapt the clearance around the convertible frame bracing to allow you to use Stainless Works 3" dual exhausts. For Headers or Complete Exhaust Systems for everything from CAMARO to Trailblazer SS examine the parts available on our web site to make you engine perform the way it should and look the way you want.

^